Replacement Plow Shoe Assembly for Meyer Snow Plow - 6-9/16" Diameter - Qty 1
(13 reviews)
Price: $93.55
In Stock
Replacement Plow Shoe Assembly for Meyer Snow Plow - 6-9/16" Diameter - Qty 1
Item # 3371303003
Our Price: $93.55
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (13)
- Q & A (0)
- Videos (1)
- Photos
SAM Snow Plow Parts - 3371303003
- Shoe Parts
- Skid Shoes
- Meyer Plow Parts
- SAM
Replaces 1 of the plow feet on your Meyer snow plow. Heavy-duty steel shoe attaches to the bottom of your blade to raise it up so that you can plow over uneven ground, gravel, grass, or dirt. Includes multiple washers to adjust its height.
Features:
- Replaces 1 shoe assembly on your Meyer snow plow
- Comparable to Meyer 09362
- Mounts to bottom of blade so cutting edge can safely travel over uneven surfaces
- Reduces wear and tear on the cutting edge to extend its life
- Includes multiple washers so you can adjust the height of the shoe
- Constructed of heavy-duty steel for durability
- Resists corrosion with black powder coat finish
- Easily installs and removes with included keeper pin
Specs:
- Overall dimensions: 10" tall x 6-9/16" diameter (shoe)
- Shaft dimensions: 8-3/4" tall x 1-1/4" diameter
- Large spacer: 1-3/4" tall
- 1-Year warranty
1303003 SAM Replacement Plow Foot Assembly for Meyer Snowplow - Comparable to Meyer 09362
Video of Replacement Plow Shoe Assembly for Meyer Snow Plow - 6-9/16" Diameter - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of SAM Snow Plow Parts - Replacement Plow Shoe Assembly - 3371303003
Hello everybody, this is Jeff with etrailer.com. Today we're gonna take a look at this replacement snowplow shoe assembly for your Meyer Snowplows. Now this part will replace the shoe assembly that's on your Meyer snowplow. This is comparable to the Meyer part number 09362. Basically it'll include everything shown here. We'll start with the linch bit.
The 11 multiple washers. The large spacer, and then the shoe assembly itself. This is designed to mount to the bottom of your blade so the cutting edge can safely travel over uneven surfaces. This will help reduce wear and tear on the cutting edge to help extend its life. And as we mentioned, it does include the spacer and the multiple washers so that you can adjust the height of the shoe when you're installing it to the snow plow.
Now I'm putting all 11 on. You might not need all 11, you just choose the right amount you need for installation free application, and then once you go to install it onto there, you just put your- slide that up into the mount, put this linch pin in there and it'll hold it into place. This is constructed of heavy duty steel for durability and it'll resist corrosion 'cause it has nice black powder coat finish on it. Few specs on this, I'm just gonna remove the parts again so we can get a specs on the shoe itself. The overall dement- or the overall height.
Very bottom to the very top, it's right at 10 inches tall. The diameter on the very bottom here, from this end to this end, it's gonna be right at about six and 9/16 inches diameter. And then just the shaft which we'll measure from the bottom here to the top. It's gonna measure right at eight and 3/4 inches tall. And the diameter on this shaft is one and a quarter inches.
But again, just take your, the spacer itself the heights on that is gonna measure one and three quarter inches on that. So then you drop that on, take your washer put as many washers as you need on there. And then insert the linchpin to hold it into place. But that should do it for the review on the replacement snowplow shoe assembly for the Meyer Snowplow..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Plow Shoe Assembly for Meyer Snow Plow - 6-9/16" Diameter - Qty 1 - 3371303003
Average Customer Rating: 4.8 out of 5 stars (13 Customer Reviews)
Replaces 1 of the plow feet on your Meyer snow plow. Heavy-duty steel shoe attaches to the bottom of your blade to raise it up so that you can plow over uneven ground, gravel, grass, or dirt. Includes multiple washers to adjust its height.by: Rancher Tom in Oregon01/24/2024
I have successfully used these Snowplow Skid Shoe Assemblies on my JD5083E tractor's JD hydraulic swivel snowplow blade here on the ranch access road (12 miles of plowing each time out.) Skid shoes eventually wear down and will fail, but these replacement plow shoe assemblies (design and material) work very well on my JD hydraulic blade at lower cost and quick delivery from etrailer.com.
by: DG03/13/2022
Used on Land Pride snow plow, on which the stock shoes wore out in less than one winter. This shoe is solid cast steel and is holding up considerably better than stock shoes. Will reorder!
by: Tom01/20/2022
The products themselves (a heavy cast iron snowplow skid shoe and a light weight container of drop in pouches for black water holding tank) were quality and met my expectations. However, I was disappointed how they were packed together for shipping. The heavy item smashed the container of light weight pouches during shipping. It would have been better to package and ship the items separately or to have added packaging protection inside the shipping box to protect the lighter weight item from shipping damage.
Jenny N.
1/20/2022
I will have our customer service team reach out to you.
by: Mike 01/06/2020
Although it hasn't snowed yet, I like my new shoes. Washers and keeper were included with each shoe, as shown. Note these shoes have the larger diameter (1.25") shaft, perfect for the Meyer I have.
Shipment was fast and painless. Thanks etrailer.com
by: David 05/11/2020
I bought this to replace the shoes on my Landpride 3 point tractor blade. These are a great fit, it was very difficult to find heavy duty replacements. Landpride wanted +$300 for replacements. I have not used these yet, but they seem well made with plenty of spacers. I use these shoes when plowing gravel driveways with the blade so the gravel does not get scraped off with the snow.
by: Douglas 10/25/2022
As advertised, one was lost during shipping and they replaced as soon as they could.
by: Jeff 11/22/2023
by: Arland11/21/2020
Great to deal with! Easy! Fast delivery!
by: Thomas01/05/2024
by: Arnold 01/23/2020
great product worked great
by: William 12/03/2021
by: Neal 12/06/2022
by: Brent 12/10/2022
13
13
See what our Experts say about this SAM Snow Plow Parts
- Length and Diameter of Replacement Shoe Assembly # 3371303003 for Meyer SnowplowThe diameter of the shaft on the Replacement Shoe Assembly # 3371303003 is 1-1/4 inches and the length is 8-3/4 inches.
view full answer...
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Noah M
Written by:
Mark S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dg
3/15/2023
These shoes have worked out fine. Price seems a high for what the item is steel bar welded to cast base with some spacers included but this is the ONLY source I could locate for shoes with this bar diameter, and the cast base is heavier duty than any others Ive seen in other sizesbrands which typically use formed plate base.