Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Great for marine applications; the stainless steel construction provides the best in corrosion resistance. The design makes Bearing Buddy an easy way to protect your bearings by keeping water out and ensuring enough grease is in the hub.
Features:
Specs:
Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub. To adjust the amount of grease in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8".
The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel and diluting the grease.
An automatic pressure-relief feature is built into the Bearing Buddy. When the device is full, grease will seep around the edges of the piston and into the barrel. This prevents overfilling that can damage the inner seal.
The blue indicator ring allows you to visually monitor the amount of grease in your hub. The ring should sit flush with the top of the cylinder. If the ring is below the top of the cylinder, add grease until the piston moves 1/8" outward.
Average Customer Rating: 4.9 out of 5 stars (704 Customer Reviews)
Great for marine applications; the stainless steel construction provides the best in corrosion resistance. The design makes Bearing Buddy an easy way to protect your bearings by keeping water out and ensuring enough grease is in the hub.On my previous trailer I installed Bearing Buddies from etrailer. They were a great product, allowing me to easily keep the wheel bearing greased and prevent the possibility of wheel bearing failure. That experience is why I ordered Bearing Buddies for my new trailer as soon as I got it.
I have a set of Bearing Buddy’s that have been on a utility trailer of mine for 22 years. Now granted it doesn’t get a huge amount of miles each year, but it’s a fair amount.Not once in those twenty two years have I inspected the bearings. I just keep them full of grease, which is so easy. I decided to put a set on my camper so that I could check my grease level at a glance, know that water will never make its way in, easily top off with grease and keep my hubs full, and only have to do a full tear down and inspection of my bearings every four to five years. It’s a no brainer for me. Install can’t be any easier.
I replaced the original Bearing Buddies on my 2004 Shore Land'r that were leaking and loosing grease. Luckily the bearings were in good shape.
Love how easy it is to keep the wheel bearings greased with these Bearing Buddy's.
Just pop the cover off, hook up the grease gun, a few quick pumps, and the bearings are ready for another season. The blue inside plate moves out as the grease goes in so you do not over fill the bearing. Slid the cover back on and you are done.
Only 4 stars because I just installed them and they fit great and this is the only trailer of the 6 I have currently installed on! Give it some time and it might be 5 stars or less
Mark
8/23/2023
Working great!! Used them in the past and don’t expect any problems
Awesome functional and a must-have in my book! These seem to work best if your trailer utilizes ez-lube axles. The stainless steel is the way to go in my opinion. These utilities a spring loaded piston inside to help keep lube packed in the bearings. Corrosions and rust on the interior interferes with the spring/piston function. The stainless steel option is going to give you the best functionality over time. Make sure you order the ones with the Auto-Check Valve, to relieve pressure (grease pressure) and help prevent over greasing.
Very reliable company to do business wi th.
Good quality replacement hub for my trailer. Easy to install.
Great product. If I had them on my trailer earlier I might have saved myself a lot of money and aggravation having to change the hubs and bearings that failed due to salt water damage. Don't go without bearing buddies ... Much easier to maintain your hubs than without them.
Just what I needed. Haven't used the trailer since installing the Bearing Buddy but expect they will be as advertised. Installation was easy.
Larrym
6/2/2017
I couldnt be happier with the Bearing Buddy after using them for the past year.
I LIKE THE BEARING BUDDY THE FIT IS GOOD
IT STOPS THE WATER FROM THE BEARING
WILL BUY AGAIN THANKS ETRAILER
It is a 500 mile trip to launch my handmade, mahogany drift boat..wanted the security of bearing buddies on my axles.. the units were easy to install, filled them with marine grease,check periodically..good to go..good service from e.trailer..good product
Easy way to maintain grease for the wheel bearings
Easy installation and SUPER FAST SHIPPI NG!!
I bought a set of 2 for my boat trailer. The one seemed to work fine the other seemed as if the outer seal leaked from the get go.
I installed the Bearing Buddy on my motorcycle trailer before towing my Harley to Connecticut. The grease caps were easy to install and provided good grease protection while on my trip.
Great price, fast service and easy install. Just purchased a teardrop trailer and it is a simple hub design with no zirk fitting. So unless you like pulling the tires and hubs off, Bearing Buddys are the way ti Go! Grease Gun, pump pump, done.
The bearing buddy's work well for easy service of my hub bearings. The only concern I have is the covers dust covers don't fit vert tight. I wrapped a zip tie around them for a more secure fit to the buddy. Make sure and measure your hub to get the correct fit.
Excellent product, installs in minutes, well worth it for peace of mind.
I continue to be very satisfied with your product and the quick delivery.
FAST AND UNDAMAGED SHIPPING! THE BEARING BUDDY BEARING PROTECTORS FIT PERFECTLY AND WITHOUT ANY PROBLEMS! THEY REALLY WILL MAKE MY BEARING MAINTENANCE SO MUCH SIMPLER! THESE UNITS ARE WELL MADE WITH QUALITY MATERIAL; I EXPECT THAT THEY WILL OUTLIVE THE 2010 TRAILER, AND ME-LOL!THANKS ETRAILER FOR YOUR ASSISTANCE IN RESEARCHING THESE TO MAKE SURE THAT THEY WOULD PROPERLY FIT MY RIG!
Replaced bearings, races, and seals + installed bearing buddies on my boat trailer. Everything went together without any problems.
Lost a few going down the highway… perfect replacement. Excellent quality. Perfect!!!
The product is fine, but the caps came off within about 2 weeks of use.
People at Etrailer were great to work with. It took me three tries, but with their help I finally got the size I needed and they are now successfully installed. Big thanks to the Etrailer folks.
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Arctic P.
6/14/2020
This product has proven it is the best choice for the job of keeping my utility trailer rolling trouble free.