Bearing Buddies that Fit a 1.979 Hub Bore Opening
Question:
Need buddy bearings. The I.D. of the hub is 1.979. What model do I need to fit my dual-axle trailer ?
asked by: Larry L
Helpful Expert Reply:
For a set of Bearing Buddies that should work with your 1.979 hub bore opening, I recommend using the Bearing Buddy Bearing Protectors - Model 1980A-SS part # BB1980A-SS for stainless steel or part # BB1980A for chrome plated. The above Bearing Buddies fit a hub bore opening of 1.980" which is the closest we have to your 1.979 hub bore opening. You will need two sets of Bearing Buddies for a dual axle trailer.
I have attached a review and installation video of the above Bearing Buddies for you as well.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Can etrailer 2,000 lb Axle be Flipped
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Trailer Wiring Diagrams
- Q&A: Issue with Bearing Buddy Leaking Grease from Overfill Port
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Recommended Bearing Buddy and Bearing Kit for Malone MicroSport Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Overview of Lubricating Grease
- Article: How to Measure a Trailer Axle