bing tracking image
  1. Accessories and Parts
  2. Optronics
  3. Trailer Lights
  4. Wiring
  5. Plugs and Pigtails
  6. Two Wire
Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug

Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug

Item # A49PB
Our Price: $5.00
Accessories and Parts
Shipping Weight: 0.04 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for backup and utility lights. 1-800-940-8924 to order Optronics accessories and parts part number A49PB or order online at etrailer.com. Free expert support on all Optronics products. Great prices and Fastest Shipping for Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (100)
  • Q & A (0)
  • Photos

Optronics Accessories and Parts - A49PB

  • Trailer Lights
  • Wiring
  • Plugs and Pigtails
  • Two Wire
  • Optronics
  • Right Angle Pigtail
  • 10 Inch Long

This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for backup and utility lights.


Features:

  • Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer
    • Designed specifically for use with Optronics backup and utility lights
  • Right-angle design of plug allows wiring to run down from the light rather than straight out of the back
  • Male-pin, 2-prong PL-3 molded plastic plug connects to back of trailer light
  • 2-Wire pigtail
    • White wire for ground
    • Red wire for power
  • #10 Ring terminal on ground wire
  • Approximate wire length: 10"


Optronics A49PB Right Angle 2-Wire Pigtail Dimensions

Pigtail is a direct replacement for:

  • Uni Bond PT6020
  • Truck Lite 94992
  • Grote 67010
  • Peterson 421-49


A49PB Optronics Right Angle 2-Wire Pigtail for Trailer Back Up and Utility Lights - 2-Pin PL-3 Plug

Alternate part number: A-49PB




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug - A49PB

Average Customer Rating:  4.9 out of 5 stars   (100 Customer Reviews)

This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for backup and utility lights.

by:

Ordered Monday, delivered on Wednesday. Did install today. Lights look in the garage, lake test Monday before sunrise.
Same brand as tail/stop lights on my trailer. Same quality look.

Dean L.

4/15/2024

Very pleased with the output on unimproved ramps. Plenty of light to back down safely in pre dawn conditions. Absolutely recommand as an upgrade in your trailer.



by:

After a year of using these in the saltwater as backup lights for my boat trailer they are still going strong



by:

They have everything you could possibly for your trailer and towing needs



by:

Right product for the job



by:

Excellent fit, high quality, and already dielectric greased!



by:

I am greatly impressed with the quality and durability of this connector. It's sturdiness has already been tested and it passed beyond its oem predecessor!!

Jon C.

7/20/2017

Its still attached to the trailer thus making it great product. The oem part failed which is why I needed a new one.



by:

Great, Good quality, plenty of wire to work with.



by: 08/10/2022

packaging of taillights where loose causing them to get scuffed and scratched during shipping, quality and visibility of lights are excellent and pigtails really good, if lights would be individually packaged and taken better care of i would give 5 stars



by:

I recently purchased all new LED lights for a 28 year old Ranger Boat trailer I own. I had to add a 5th blue wire for the back up lights along with a new 5 wire plug. Everything came from etrailer and was an amazing, easy conversion from the old to the new. My new tail lights are amazing with the built in back up lights! Nothing but compliments from people who have seen them.
Your company was a pleasure to work with. You have a customer for life! Thank You!



by:

I was able to replace my existing lights with these that include the back-up light feature. Exact fit and work better than expected. Now I can see behind my 5th wheel when backing up the rig. The light harness along with the light fixture more than met all my expectations.



by:

Recently it was time to replace/ upgrade my boat trailer rear lights. I found exactly what I was looking for at etrailer. The parts I ordered were well described and fit exactly right for my application. I also ordered the wire pigtail connectors as I was adding lights with an integrated backup lamp. Installation was a breeze and all the parts seem to be high quality. I will definitely buy more items of etrailer in the future. Thanks for the parts.



by:

Product worked exactly as described... made for an easy conversion of my original LED tail lights to upgraded models that feature integrated backup lights.



by:

Worked great! Need it to install GloLight LED Backup Light for Truck or Trailer - Submersible - 22 Diodes - Oval - Clear Lens - BUL111CB



by:

These were a great option for the limited space available on my trailer. I find myself pulling my trailer at night frequently, and I'm not sure how I made it so long without reverse lights.



by:

while shipping was on the slow side the item Ipurchased was exactly the right fit and was of excellent quality at a great price.I highly recommend etrailer if shipping time is not an issue,their prices are good and the parts are of good quality.



by:

I made this purchase for my son's boat trailer. I ordered on the Monday before Thanksgiving and it arrived the day before. Everything arrived as expected and well packed.



by:

Had to buy these when adding reverse lights to back of utility trailer. They work well in the led lights.
Easy to install and of good quality. No complaints.



by:

Good plug. Have bought several. etrailer.com ships same day and they are great people to do business with.



by:

Excellent service and attention to detail. I would highly recommend purchasing from etrailer. Prices are great and they have a wide selection of information that helps with the purchase decision. Very impressed.



by:

Simple part. Fit the optronics lights that we have well.



by:

It's the correct pigtail for the lights they sell, what more can be said?



by:

I suggest using part of a pool noodle to ensure the connection stays tight, in the enclosier.
I used this in pole lights on a boat and they did rattle free , before I used the noodle mod.



by:

Great product would buy again also highly recommend buying from e trailer fast shipping got what I ordered in 2 days



by:

well made unit, did not utilize, but would buy again



by:

Standard 2 wire light plug, works well


25
100
Show More Reviews

See what our Experts say about this Optronics Accessories and Parts

  • LED Reverse Light Recommendation for 2005 Toyota Prius
    Since you have a Prius I would strongly recommend going with an LED reverse light that will draw considerably less than the Halogen part # PL-807. For that you'd want the LED light part # BUL10CB with the bracket # BK70BB and the grommet # A70GB and you'd have a setup that draws only .28 of an amp per light. You'll also need a wiring pigtail like the part # A49PB. This could be ran to the reverse light circuit of your vehicle without overdrawing it.
    view full answer...
  • Oval LED Trailer Tail and Backup Light that Mounts with a Grommet
    The closest match would be # STL211RB. It doesn't have a clear lens or Glo feature though. The grommet for this light is # A70GB and you would need pigtails # A47PB and # A49PB to plug into the back of it.
    view full answer...
  • Brighter Trailer Tail Lights to Replace Bargman 92 Series Tail Lights
    There are brighter lights available for your current Bargman 92 Series lights, but none that have a reverse light function. So to replace your current lights with brighter LEDs you will need the LED Trailer Tail Light - Driver's Side # 328-003-81LM1 and LED Trailer Tail Light - Passenger Side # 328-003-81M1. That's the closest available for your mounting width, and I have added a link to a video install for you to check out. Additionally, you could just add separate reverse lights if...
    view full answer...
    Image 1 for
  • Installation Process for Optronics Light Guide LED Backup Light for Truck/Trailer
    In order to connect the Light Guide LED Backup Light # BUL602CB to your truck bed light you will want a 2-wire pigtail. You can use the 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights # A45CB or the Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights # A49PB. These will plug into the back of the light. Once you have these, you will need to connect the wires to your truck. The white ground wire needs to be secured to a clean, bare-metal surface. The...
    view full answer...
  • Rewiring Boat Trailer for 7-Way to Use LED Lights
    There are a number of things you will need if you want to re-wire your boat trailer to use LED lights and you should start with Junction Box # 3375601100 and 7-Way # HM20041. Keep in mind you will also need Ring Terminals # 44-5310A and Loom Clamps # A0500 For LED lights I highly recommend checking out the LED Trailer Tail Light # STL57RB (Driver's side) and # STL56RB (Passenger's side). These are submersible lights with a total of 40 diodes and have mounting holes that are 2" center to...
    view full answer...
    Image 1 for
  • Recommended Oval LED Lights and Brackets for Flat Bed
    For your flatbed setup, I recommend starting with the brackets # BK70BB. Then I recommend using the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # a70gb to hold the lights in the bracket. For the red led lights I recommend the Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens # STL72RB with wiring pigtail # A47PB. For the white led lights I recommend the LED Backup Light for Truck or Trailer - Submersible - 10 Diodes - Oval - Clear Lens - Qty...
    view full answer...
  • DOT Approved Trailer LED Reverse Light and an LED Interior Trailer Light
    Optronics light # BUL78CB is a utility light so it is not DOT approved to be used as anything other than that. For the interior of the trailer it will work fine, it doesn't have to be DOT approved since it isn't a tail, marker, reverse, brake, or turn signal light. It is about as tough as any other trailer light that you would find but I would not expose it to repeated impact from cargo. the lens or flange would eventually crack. If you are looking for a DOT approved reverse light with...
    view full answer...
  • How Does Backup Light of Fusion LED Trailer Tail Light Work
    In order to utilize the backup light function of the Fusion LED Trailer Tail Light # STL211RB you will need to plug in a 2-Wire Pigtail, either part # A45CB or # A49PB for a right angle pigtail. You can see from the accompanying photo of the rear of this light that it has connections for both a 2-wire and 3-wire plug. This would need to be used along with the 3-Wire Pigtail # A45PB or # A47PB (right angle) which gives the light its tail light functions. I looked up your order from the...
    view full answer...
    Image 1 for
  • Are Wiring Plug-Ins Needed for Optronics Trailer Tail Light # STL211RB
    Yes, wiring pigtails will be needed in order to install the Optronics Trailer Tail Light, # STL211RB. For straight pigtails you will need the 3-wire, # A45PB, and 2-wire, # A45CB. For right angle pigtails you will need the 3-wire, # A47PB, and 2-wire, # A49PB.
    view full answer...
  • Brightness and Installation of the Optronics LED Backup Light # BUL22CB on a Boat Trailer
    I have attached a video demonstrating the brightness of the Optronics LED Backup Light, # BUL22CB, for you to check out. This light is waterproof and will work well on your boat trailer as a reverse light. Along with this light, you will want the Two Wire Pigtail, # A49PB. The end of this plug is molded rubber that, along with dialectic grease, will help seal the plug from water and moisture. To attach this light to your trailer, you will need the grommet, # A70gb. If you will not be...
    view full answer...
  • Recommended 4 5/16" Clear Lens Light For Utility Box
    I may have an option but we do not have a matching white/clear lens light like the 4 5/16" Miro-Flex LED Trailer Tail Light # STL23RB you mentioned. The closest option we have is the ONE LED Backup Light # BUL003CB which is 4 5/16" and offers a water proof design with a clear lens and a single white LED diode. You will also need the 2-wire Connector # A49PB and Mounting Grommet # A45GB. I included a video of the ONE LED # BUL003CB for you to take a look at.
    view full answer...
  • Submersible LED Trailer Light Recommendation to Provide Standard Functions and Back-up Lights
    In order to have the tail light functions that you requested, you would have to go with two separate lights. I recommend taking a look at the Wesbar Wrap Around Tail Lights. For the 8-function left hand side, part # 271595, and part # 271594 for the right hand side of your trailer. These lights will serve as a stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license plate illuminator on the driver's side light. Next you would need to add a back-up light like...
    view full answer...
  • Parts Needed to Add Back Up Lights & 7-Way Connector on Boat Trailer
    We can get you set up to add back up lights and a 7-way to your boat trailer, and I'll go over what you'll need. Let's start with the back up lights, and for your boat trailer you'll want submersible lights like you said, the GloLight LED Backup Light for Truck or Trailer - Submersible # BUL111CFPG. This will use a 2-wire (power and ground) pigtail, either the Right Angle 2-Wire Pigtail # A49PB or 2-Wire Pigtail # A45CB. Then for added wire I recommend 16 Gauge # 16-1-1, which is sold...
    view full answer...
  • Recommended Rubber Mounted 2 Inch White LED Light for Reverse Lamp
    If you are looking for an oval shape, we have the GloLight LED Backup Light for Truck or Trailer - Submersible - 22 Diodes - Oval - Clear Lens - Qty 1 # BUL111CB which is rubber mounted using # A70GB. This light requires pigtail # A45CB or 90 degree # A49PB. If you are looking for a round light, I recommend the 2 inch # UCL50CB. This will use the same pigtail, but will use grommet # A54GB.
    view full answer...
  • LED Reverse Light for Trailer with Limited Space
    One option for a DOT approved LED reverse light is Sealed, 6" Oval, LED Trailer Utility Light, Adhesive Mount, 10 Super Diode - Clear Item # BUL78C3MB. It is 7-9/16" x 3-5/16" x 3/4". You mentioned there isn't a lot of space available. How much space do you have? There are not a lot of DOT approved reverse lights available so another option is to use light # BUL10CB with grommet # A70GB and bracket # BK70BB and pigtail # A49PB. Then you can mount the light in the bracket off of the frame.
    view full answer...
  • Are Load Resistors Needed for Reverse LED Trailer Lights
    You will not need load resistors to install the Optronics LED Backup Light for Truck or Trailer # BUL35CB; load resistors are not needed for reverse lights like these. The only thing you will need are Grommet # A33GB and a 2-wire pigtail, either part # A45CB or the right-angle pigtail, part # A49PB. I have added links for video reviews for you to check out as well.
    view full answer...
  • Submersible Reverse Light Recommendation for Boat Tariler
    Best option we have would be the white utility light part # BUL602CB which is submersible and provides quite a bit of white light for visibility when backing up. Then to mount the light you'd need the mounting bracket part # BK70BB, the mounting grommet # A70GB, and then the pigtail part # A49PB.
    view full answer...
  • Recommended 6 Inch Oval LED Backup Light For Brightness
    We have 6-1/2 inch oval LED lights that are very bright, that are typically referred to as 6 inch lights in the trailer industry. I recommend the Optronics GloLight LED Backup Light for Truck or Trailer - Submersible - 22 Diodes, # BUL111CB, because it is a very bright replacement light that that meets the DOT compliant standards. They have a very clean look and are sonically sealed so they can handle all the weather thrown at them. They require a recessed mount # a70gb, and a 2-prong...
    view full answer...
  • Brightest LED Backup Lights Available That Fit Oval Hole On Trailer
    The GloLight LED Backup Light for Truck or Trailer # BUL111CB that you mentioned is going to be your best option if you are looking for the brightest backup lights in the oval recessed mount style. This product does not offer specs for lumens; I did contact Optronics to verify. They did, however, confirm with me that this LED backup light is going to be the brightest one available. It has 22 diodes, which is more than any other light in this configuration/style. This is DOT compliant. The...
    view full answer...
  • Recommended 4 Inch Diameter Clear LED Back-Up Lamp w/ Pigtail and Grommet
    For a standard 12-volt electrical system, I'd recommend the Optronics # BUL11CB. The # A49PB right-angle plug is compatible with the lamp, and you'd need the # A45GB grommet. For a 24-volt electrical system, use the # BUL23C24B lamp, which is compatible with the same plug and grommet mentioned above.
    view full answer...
  • Plugs Needed for the Fusion LED Trailer Tail Light # STL211RCB
    At first I thought that this light had 2 places for the 3 terminal plugs but if you check out the attached picture of the Fusion LED Trailer Tail Light # STL211RCB you can see that one plug has 3 prongs (for tail light functions) and one plug has 2 prongs (for reverse light function). If you are just needing standard plugs then you would use part # A45CB for the 2 prongs and part # A45PB for the 3 prongs. These are also available at right angles with parts # A49PB and # A47PB respectively.
    view full answer...
    Image 1 for
  • Flush Mount, Submersible LED Back Up Light Recommendation for a Trailer
    The brightest LED light, flush mount, submersible, that can be used as a back up light, is going to be the round light # BUL23C24B. But this is a 24 volt light and it has 27 diodes. For a 12 volt back up light that is flush mount and submersible would be # BUL10CB or # BUL11CB. For the BUL10CB that you have referenced, you will also need grommet # a70gb, and a wiring harness # A49PB. For the round light # BUL11CB, you would need grommet # A45GB. and harness # A45CB.
    view full answer...
  • Recommended Brightest Interior Utility Light Replacement
    The Miro-Flex LED Utility Light - 12 Diodes - Round - Clear Lens # OPT57FR would be a good choice for an interior replacement light for your trailer. Although the number of diodes does not necessarily indicate brightness, this has the most of any round utility light we have. The light measures 4-5/16" in diameter and is 2-3/8" deep. If you want to mount it flush you will also need the Rubber Grommet # A45GB. From what I have found it looks like the Peterson has a single wire installation....
    view full answer...
  • Recommended Clearance Light And Grommet For Older Snowmobile Trailer Rebuild
    The clearance light I recommend for your snowmobile trailer is part # MCL57RB. This is a 3 diode 2-1/2 inch round light. It does require a rubber grommet for installation. The grommet to use for installing this light I recommend is part # A57GB. You may need to take a small round file and open the mounting hole you said measured about 2-5/8 inches but this should work well for your trailer. To connect the light to your trailer wiring I recommend using the Two Wire Pigtail, part # A46PB....
    view full answer...


< Previous



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Updated by:
Laura H
Employee Amy B
Updated by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.