Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing
(124 reviews)
Price: $13.26
In Stock
Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing
Item # A25723-90AH00
Retail:$19.49
Our Price: $13.26
You Save: 32%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (124)
- Q & A (0)
- Videos (2)
- Photos
Timbren Accessories and Parts - A25723-90AH00
- Vehicle Suspension
- Spacers
- Timbren
1" Spacer fits vehicles with raised frames. Center bushing fits a 3/8" bolt.
Features:
- Spacer fits vehicles with raised frames
- Quantity: 1 spacer
Specs:
- Thickness: 1"
- Overall diameter: 4"
- Bushing diameter: 3/8"
A25723-90AH00 Timbren 1" Spacer with 3/8" Bushing for Raised Frame Vehicles
Video of Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Timbren Vehicle Suspension Spacer - A25723-90AH00
Michael: Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the Timbren one-inch spacer for raised frame vehicles. Now Timbren does recommend that you have a half to one and a half inches of clearance between your Timbren and the contact point when the truck isn't under a load. If the clearance is more than what's recommended, then a spacer is going to be the ideal solution for you.Now, this spacer measures one inch thick; has an overall diameter of four inches. And the hole here in the center will accept a three-eighths inch diameter hardware.
Remember that the hardware is going to need to be longer since you're adding a spacer. You can go to your local hardware shop and pick something up, that's exactly what we do here when we install these on customer vehicles here in our shop, so you should be able to find that pretty easily.Now, this is the one inch spacer. There's also a half inch spacer. So if you need just a little bit more than the one inch here, or maybe just a little bit less, you have that option as well. You can find that here at etrailer.com using the part number that you see on the screen there.So if you're needing a little bit more space for your Timbren Springs, this is going to be the piece that you need.That's going to complete our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing - A25723-90AH00
Average Customer Rating: 4.8 out of 5 stars (124 Customer Reviews)
1" Spacer fits vehicles with raised frames. Center bushing fits a 3/8" bolt.by: Michael02/25/2024
I updated my leaf springs recently and now when I hook up my trailer the timbres don’t engage anymore. The back is now 2 inches higher. So I got 4 1” spacers and put them on. Now I have a one inch space like I used to have. They seem to work great. The hardest thing on installing them was to get the old rusted bolts loose. Also needed 2.5” 3/8-16 flathead bolts for my install. They are a little harder to find and I could only find them with a slotted head.
by: Ron E.07/05/2020
This is an excellent product that helped level my 4runner while pulling my travel trailer. By preventing the back end from sagging, the front wheels stay fixed to the road for proper steering. I believe the 3/8 bushing was too small and I required 1/2 inch instead. Kaylyn at etrailer.com went above and beyond their normal customer service and got me in touch with the sales rep for Timbren, who promptly sent me the right size in time to make my big trip. He worked with me to find the right size for my after-market lift kit. In a time that companies are indifferent at best, etrailer.com makes the customer feel important in a sincere way. I also love e.trailer's selection and fast shipping.
by: SS03/26/2017
With our 2007 Tundra we pull a 2016 Lance twin axle travel trailer. Lance advises a towing height of 20.5" from the road to the top of the ball hitch. To bring my Tundra up to the right height, I originally purchased etrailer Timbrens. However, after installing the Timbrens the Tundra was still too low. By adding this 1" spacer the height is now about 20.25". The pictures show the Tundra with just the Timbrens and then after adding the spacer. If you buy this product, you'll need to purchase longer Timbren bolts; etrailer mentions that on their video. I want to thank etrailer for providing great information and excellent products.
by: Curtis08/19/2016
I have a 5.7 V8 Toyota Tundra. I run a dumpster rental and hauling company. I have Hellwig 2,500 pound helper springs and 6,000 pound Timbren shocks with the 1 inch Timbren spacer on the rear of my truck. Below is a picture of a 11,000 pound load hooked up to my tundra with 1,000 pounds in the truck bed as well. Zero squat. I love Timbrens products. Heavy duty. Perfect for my needs. They have a load on them 24/7/365 between the 1,000 pounds of tools and equipment in my truck bed and the very very heavy trailers I pull on a daily basis. Thank you Timbren! Have a trailer behind my Tundra daily. Power is NEVER an issue. It pulls like a diesel. Just needed to beef up the rear suspension a tad and this did just that. I'm all set now! Looking to get the front Timbrens sometime soon to. Not that I need them, more just a want. I do have a 400 pound HD winch bumper on the front of my truck but it's not causing any nose diving or anything. Just like the extra support provided by the Timbrens. Never hurts.
by: Greg03/12/2024
These work fine with Sumo Springs, which is what I needed.
by: Carlos04/15/2022
So far so good, I added Sumo Springs to my 4runner, but I have a 2" lift, and needed 2 of these spacers on each side to keep the Sumo Springs at the proper distance from the axle,seem to be good quality.
by: Gary 11/05/2023
This is my 3rd order over the last several years I've made with etrailer. They are always friendly and happy to help you with your order. If you have any questions about one of their products be sure to contact them before moving on to another source. They fill orders quickly and accurately.
by: Robert10/26/2017
Looks great have not put a heavy load on it yet. Had to use three 1in spacers I have a 4.5in suspension lift on my 2011 F250 4wd.
by: Food Truck Doug07/12/2020
These “overloads” are such a great answer to suspension needs! They are made with high grade materials and the installation was a snap! I would buy them again many times over! Don’t mess with air bags, compressors, air lines and all that “stuff.” These are the deal!! Pictures of before and after. Simple way to add significant suspension payload quickly with little fuss.
by: Cajun04/11/2024
Order was just what I needed.
by: Micah05/26/2023
Thank you Carol C for all of your support and rapid response and explaining everything. I wish I found etrailer a long time ago for my Tacoma mods. Will be looking for a roof rack soon so will come here first! Your site is probably the most helpful and informative that I have been to in a long time. New customer that will always check your site before going anywhere else. Thank you!
by: Abraham07/22/2020
I have Timbrens and needed a spacer to improve the squat of my 2017 F150 after I bought a 2018 Lance 650 truck camper. Works perfectly. Rides great.
by: Thomas11/22/2022
Put these on my F350 towing a 15K pound 5th wheel to minimize squat, and after about 15K miles, I have been very happy with how they work. Super easy to install.
by: Robert05/03/2019
These worked great. I needed at least 3/4 of an inch more Because my truck is lifted. Just needed to get longer bolts.
by: Justin T04/16/2017
I use this with the timbren SES for my 2016 Tacoma. I tow a 5500 pound trailer with 900 pound tongue weight. Truck squats maybe 1 inch and that's it...incredible. Ride quality while not towing is indistinguishable from stock other than there is a very noticeable reduction in body lean while cornering. I liken this to the same feeling as installing larger sway bars on a sports car. This is just st an added benifit if the timbren system. Highly recommend anything timbren puts out. Etrailer also has outstanding customer service.
by: JayG12/01/2018
You don’t need these if you have a front end leveling kit on a Silverado 1500. It is too much. The Timbrens are installed at the frame and the extra half inch that far back on the a-arm makes the suspension way too stiff. On a fun note, going to take these out, I tripped backwards over the tire I had off my truck and ruptured my quadriceps tendon. Still recovering almost a year later.
by: Joel04/07/2018
Purchased item TGMRYS4 for my 2008 Tahoe 4x4, once installed I had a 3" gap between bellows and contact pad. Pulling my trailer made no difference with Timbren Bellows so I had to install the 1" spacers to come close to the recommended spacing from the instructions. After research I found out that Timbren TGMRYS4 fits multiple vehicles with different ride heights. I may still need the 1/2" spacer to comply with Timbrens recommendations of 1 1/2" clearance. GREAT product to fix issues like mine.
by: Brandon03/24/2018
Excellent spacers to use on lifted trucks. 2" lift used two 1" spacers.
by: Shomari01/05/2024
Great product! Excellent service!
by: Erik 05/19/2023
Another of many orders from trailer. Easy to follow website and fast shipping
by: John10/17/2022
Just rec,d my kit today. Very impressed with the quick delivery time and customer service to this point. With send another review after installation. As of now I am very,very happy with the service and the product. Exactly what I was expecting. Looking forward ti installation. John L. Horne
by: Brad04/07/2022
These spacers are just what you need if your truck has been lifted. The product is well built and allowed me to get the correct spacing. They also coming in different diameters. The order was quickly shipped and worked as advertised.
by: Jeff 08/07/2021
Etrailer is very easy to work with and their customer service is excellent. The Timbren SES is easy to install and seem to be a significant upgrade from the OEM parts!
by: George 06/12/2023
Very easy to install with my Timbren sp ring.
by: Shauna03/03/2022
Does what it is advertised to do.
Monty S.
3/6/2023
Product is wonderful, I installed them on the front of my truck to keep the snow plow from bottoming out while driving and guess what it worked.
25
124
Show More Reviews
See what our Experts say about this Timbren Accessories and Parts
- How Many Spacers For Timbrens on 2018 Ford F-150 With 6 Inch LiftFor your 2018 Ford F-150 with a 6 inch suspension lift you would need a total of 12 spacers - 6 for each side - of the Timbren 1" Spacer For Raised Frame Vehicles # A25723-90AH00 to use with the Timbren Rear Suspension Enhancement System # TFR1504E.
view full answer... - Timbren Setup Recommendation for 2017 Ford F-150 with 2 inch LiftIf the lift was a body lift where the suspension didn't get raised then you would not need any type of spacer, if the lift was a suspension lift then you'd need the # A25723-90AH00. This is a 1 inch spacer though so you'd need a total of 4 for both sides. Then for the actual Timbren kit you would want the part # TFR1504E.
view full answer... - Do I Need Spacers To Install Timbren Springs On 2020 Ford F-350 Super Duty With LiftTo install the Timbren Suspension Enhancement System - Rear Axle part # TFR350SDJ on the 2020 Ford F-350 Super duty you will need spacers to make up the space from the lift. Timbren recommends having 1/2" to 1-1/2" of gap between the spring and the contact point. Measure from the spot where the OEM bump stop is installed down 7-1/2". The Timbren spring will be 7-1/2" long once installed. If you have more than a 1/2" space between that measurement and the contact point you will need a spacer. Depending...
view full answer...
- Will the Air Lift Air Bags Fit a Lifted 2011 Toyota 4RunnerThe Air Lift 1000 Air Helper Springs for Coil Springs part # AL94VJ are a fit for a 2011 Toyota 4Runner with stock coil springs. If the lift utilizes the stock coil springs then there should not be an issue. If the lift uses aftermarket coil springs the only real option would be the Timbren Rear Suspension Enhancement System part # TTORSEQ with spacers, the Timbren Spacer part # A25723-90AH00.
view full answer... - Timbrem Vehicle Suspension Enhancement Recommendation for 1998 Jeep Cherokee with 2 Inch LiftThe Timbren Heavy-Duty Front or Rear Suspension Enhancement System, # TJRC01, does come with a spacer designed to adjust ride height which will take up some of the space created by the 2 inch lift. However, you will most likely need to use spacers as well. We have 1 inch spacers, # A25723-90AH00. I would recommend using the front kit, # TJFC01, if you plan on carrying a plow on the front or doing some winching, or if you are looking for more stability at the front of the Jeep. I have included...
view full answer... - Front Axle Timbren Kit Recommendation for 2014 Dodge Ram 3500 with Snow PlowFor your 2014 Dodge Ram 3500 the front Timbren kit you'd want is the part # TDF25004E which is a confirmed fit and the kit Timbren recommends for trucks that will be plowing like what your plan is. Then you'll need spacers too since you have a lift on the front axle. For that you'd need 4 of the # A25723-90AH00 plus 2 of the # TA25722-90P00 and you'd be set.
view full answer... - Spacers for SumoSprings Custom Helper SpringsWe do have a 1" spacer for the SumoSprings Solo Custom Helper Springs, part # SSR-108-40. It's the Timbren 1" Spacer For Raised Frame Vehicles, part # A25723-90AH00. You can add these on top of the one that comes with Helper Springs to get you to that 2" mark. These are made specifically for Timbren suspension systems, but they work with the SumoSpring Solo Helper Springs. Just keep in mind that if you add this, you will need to replace the mounting bolt with a longer one, which you can...
view full answer... - Helper Springs for a 2002 Chevy Avalanche Z71 with 6 Inch LiftSince the springs are longer than stock on your 2002 Chevy Avalanche air bags that fit inside the springs, such as # F4108 will not work. There are not spacers available that would work either. But I do have a solution for you. You could use Timbren springs # TGMRG25C for a 1500 or # TGMRSB4S for a 2500. Then you would need 8 of the 1 inch spacers, # A25723-90AH00, 4 for each side. Timbren does not recommend using any more spacers than that so there will still be a little travel before...
view full answer...
- Thickness of Spacer that Comes with Timbren Kit # TGMRCK25The thickness of the spacer that comes with the part # TGMRCK25 is 1 inch. Since you have a 2 inch lift you'd also need spacers # A25723-90AH00 to compensate for that. These are 1 inch so you'd need a quantity of 4 of these.
view full answer... - Timbren Suspension Enhancement For 2014 Dodge Ram 2500Here is the Timbren Rear Suspension Enhancement System # TDR2500D you need for your 2014 Ram 2500. I've included an installation video and some others for you to watch! It is on a 2019 Ram 2500 but will be practically the same install. You should use spacers since you have a 6 inch lift. Here is one for 3/8 inch bushings # A25723-90AH00 and some for 1/2 inch bushings # TA25723-90AD00.
view full answer... - Recommended Suspension Enhancement For 2012 Ram 1500 With Leveling KitYou can install suspension enhancement on just the rear of your Ram. The SuperCoils Custom Rear-End Suspension Coils, part # SSC-50 are designed to fit your truck and will help reduce rear end sag when towing heavy items. These will also raise the back of the vehicle 3/4 inch. These are designed to replace the rear coils on your truck. The easiest to install and use suspension enhancement is the Timbren, part # TDR1500DQ. These simply replace the bump stops installed on your truck....
view full answer... - How To Fix 1" Gap After Installing Timbrens On a 2000 Ford F-250The Timbren Rear Suspension Enhancement System part # TFR150SDE which is a fit for a 2000 Ford F-250 is designed to produce around 1/2" - 1-1/2" gap. It will still work to reduce sag/squat with a gap but not till the threshold of the suspension is reached. Some prefer more of a buffer than others since the ride can be rougher when engaged. Nevertheless, you can use the spacer part # A25723-90AH00 for 1" or part # TA25722-90P00 for 1/2" to close the gap.
view full answer... - Will The Timbren Jounce Springs Fit on a Factory Lifted 2021 GMC Sierra 1500 AT4? The Timbren Springs # T28MR has an overall height of 5-11/16". With your 2021 GMC AT4 having the factory lift you will want to measure the distance from inside the cup on your current jounce bumper to the pad on the axle. We do have a 1" Spacer # A25723-90AH00 and 1/2" Spacer # TA25722-90P00 which can be added to the jounce spring to give you the recommended 1" of air gap between the jounce spring and axle pad. You will likely need to source a longer M10 - 1.50 bolt locally to account for...
view full answer... - Which AirLift Suspension Enhancement System Is Recommended For 2020 Jeep Wrangler Rubicon?The correct rear Air Lift system for your 2020 Jeep Wrangler Unlimited is Air Lift 1000 Air Helper Springs for Coil Springs - Rear # AL60829. This will drastically reduce rear-end sag and also improve handling and reduce body roll. In order to determine which spacers you need, you will need to measure the lift blocks on your vehicle. If they are in fact 2" then you can use Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 2" Lift # AL52420. In regard to the front suspension,...
view full answer... - Can Spacers Be Added To Timbren Service Duty Model for 2020 Ford F-350The correct Timbren Suspension Enhancement System for a 2020 Ford F-350 is part # TFRTT350J for service duty applications and part # TFR350SDJ for standard duty applications. The service duty models are smaller in height but more dense so they offer more support. The only time the service duty models should be used is with an in-bed camper in which case the truck would be loaded all the time so your space between the spring and contact point would be little to none. If you want to use...
view full answer...
- Spacers to Use for Timbren Kit on 2009 Ford Ranger to Take Up 1-1/2 inch of SpaceTo get a total of 1-1/2 inch of spacer for your Timbren kit part # TFRR050A you'd need to use the 1 inch spacer part # A25723-90AH00 as well as a 1/2 inch spacer part # TA25722-90P00.
view full answer... - Spacers for Timbren Suspension Enhancement on 2020 Ford F-250 Super DutyIt is possible you can use the Timbren Suspension Enhancement System # TFR350SDJ (which is made for a Ford F-350) on your 2020 Ford F-250, but we have never done this and it hasn't been tested so I just can't guarantee a good fit. There are spacers that will work with your F-250 and the Timbrens that are designed to fit it, the Timbren Suspension Enhancement System # TFR250SDJ. You can add spacers in increments or 1/2" or 1" with the Timbren 1/2" Spacer # TA25722-90P00 and Timbren 1"...
view full answer... - Which Timbren Kit Fits 2003 Ford F-150 4x4 that is LiftedThe correct Timbren kit you'd need for your 2003 Ford F-150 4x4 is the part # TFR1525HD that you referenced and since you have the two inch leveling kit as well you'd need the spacers # A25723-90AH00 as well. You'd need a total of 4 of these since you have a 2 inch lift that's on both sides of the truck axle.
view full answer... - Front Suspension Enhancement Options for a 2016 Jeep WranglerIn order to prevent front end sag on your 2016 Jeep Wrangler with a snow plow attached, I recommend using the Timbren Front Suspension Enhancement System part # TJFTJ. Unfortunately, we do not have any airbag kits compatible on the front of your Jeep at this time. As long as you have the 4 wheel drive model then the above kit will work for you. If you have a 2 wheel drive model then unfortunately we really don't have anything that is going to work well. If you are referring to a body lift...
view full answer... - Can You Use Spacers With Service Duty Timbrens On a 2022 Ford F-350Yes, you can add spacers to the Timbren Suspension Enhancement System part # TFRTT350J which is the service duty model designed for a 2022 Ford F-350. The correct spacer will be the Timbren Spacer part # A25723-90AH00 for 1" or part # TA25722-90P00 for 1/2".
view full answer... - What Spacer Bushing Diameter is Used with Timbren Kit that Fits 2022 Chevy Silverado 2500The Timbren kit part # TGMRCK25D that fits your 2022 Chevy Silverado 2500 would require the lift spacers that have a 3/8 inch diameter bushing hole like the part # A25723-90AH00 which is 1 inch thick or the # TA25722-90P00 for a 1/2 inch diameter spacer.
view full answer... - Can both a 1 Inch Spacer and 1/2 Inch Spacer be Used Together for Timbren Helper SpringsYes, you can use a 1 inch Timbren spacer, # A25723-90AH00, with a 1/2 inch spacer, # TA25722-90P00, to get to the height you need for your 2015 Toyota Tundra.
view full answer... - Fitment Issues of Timbren Rear Suspension for Lifted Truck It does appear to have proper fit for the Timbren Rear Suspension Enhancement System # TGMRSB4S, that you would have to insert a spacer between the Timbren and the mount on your lifted 2002 Chevrolet Avalanche 2500 4x4. The Spacer # A25723-90AH00 will allow you to acheive the correct geometry for your Avalanche. At this time we do not carry the correct hardware to go along with these so you will need to find bolts that are 1" longer than the included bolts in the kit.
view full answer... - Total Height of Timbren Active Off-Road Bumpstops for a 2011 Nissan FrontierThe total height of the Timbren Active Off-Road Bumpstops part # TABSOSR which are a fit for a 2011 Nissan Frontier is 4-5/8". If you want to add spacers you'll use the Timbren Spacer part # TA25722-90P00 and or part # A25723-90AH00. In regards to fitment, you can add spacers so there is no space between the contact point and bumper but this would not lift the truck and it could also result in a stiff ride.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Installed by:
Cole B
Installed by:
Michael B
Updated by:
Wilson B
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brad
4/8/2023
After a year, I am still very happy with the product. Really good value for the price. Especially compared to more expenseive options.