Lift Spacers for Firestone Ride-Rite Air Helper Springs - 2" Spacers - Qty 2
(33 reviews)
Price: $108.99
In Stock
Lift Spacers for Firestone Ride-Rite Air Helper Springs - 2" Spacers - Qty 2
Item # F2366
Our Price: $108.99
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (33)
- Q & A (0)
- Videos (2)
- Photos
Firestone Accessories and Parts - F2366
- Vehicle Suspension
- Spacers
- Lift Spacers
- Firestone
Install Ride-Rite air springs on a lifted vehicle with these lift spacers. Spacers attach between the bottom of the lower bracket and the bottom of the spring on vehicles with a 2" lift. Kit fits air springs that mount on axle or leaf stack.
Features:
- Allow air springs to be installed on vehicles with 2" lift
- Distance between upper and lower brackets must be between 7.5" and 8.5"
- Spacer must be same size as lift kit rise
- Include 2 lift spacers and all hardware necessary for installation
- Lift spacer fits axle- and leaf-mounted air springs
Specs:
- Application: Vehicles with 2" lift and from 7.5" to 8.5" between upper and lower brackets
- Will not fit Ride-Rite models F2350 or F2286
- Will fit Ride-Rite model F2286 if manufactured after Feb. 1, 2006
- Will not fit Ride-Rite models F2350 or F2286
- 2-Year limited warranty
WR17602366 Lift Spacers for Firestone Ride-Rite Air Helper Springs - 2" Spacers - Qty 2
2366
Video of Lift Spacers for Firestone Ride-Rite Air Helper Springs - 2" Spacers - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Firestone Vehicle Suspension - 2 Inch Lift Spacers - F2366
Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the two inch lift spacers for the Firestone Ride-Rite air helper springs. This is for a quantity of two. Now, these will allow your air springs to be installed on vehicles that have a two inch lift. And basically, the distance between your upper and lower brackets must be between 7 1/2 and 8 1/2 inches.
And the spacer itself must be the same size as your lift kit rise. This part will include everything shown here on the table. It includes the two lift spacers, all the hardware necessary for installation, nice set of installation instructions. And the lift spacer will fit axle and leaf mounted air springs. Again, the application is vehicles with a two inch lift and a 7 1/2 to 8 1/2 inch measurement between the upper and lower brackets.
Now, this will not fit the Ride-Rite models F2350 or F2286, but it will fit the Ride-Rite model F2286 if it's manufactured after February 1st of 2006. But that should do it for the review on the two inch lift spacers for the Firestone Ride-Rite air helper springs..
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Lift Spacers for Firestone Ride-Rite Air Helper Springs - 2" Spacers - Qty 2 - F2366
Average Customer Rating: 4.8 out of 5 stars (33 Customer Reviews)
Install Ride-Rite air springs on a lifted vehicle with these lift spacers. Spacers attach between the bottom of the lower bracket and the bottom of the spring on vehicles with a 2" lift. Kit fits air springs that mount on axle or leaf stack.by: Richard08/01/2023
Won't fit the GMC 2023 LZ0 Diesel!! I had the Ride-Rites on my 2013 Tacoma, and they worked great! I recently purchased a 2023 GMC Sierra 1500 with the DuraMax 3.0 Turbo diesel LZ0 engine. The air bag kit F2609 does not fit this vehicle, even though Firestones WEB site indicated it did. The problem is the upper bracket and airbag contact the exhaust pipe. After calling Firestone, the product specialist knew of this information and are now updating their WEB site. After etrailer confirmed my findings with Firestone about this issue, everything will be returned, and they too will update their WEB site too :(
I'm giving etrailer's Customer Support 5 stars, and Firestone -20 stars for not keeping their WEB site current and knowing about this issue!
by: Michael04/06/2024
After a year of use including 3 months in Alaska, these Air helper springs have worked flawlessly. They give me just enough lift to level out my truck with over 800lbs of trailer tongue weight and 500lbs in the bed. I have individual adjustments on my Ride-rites and I haven't needed to make the pressure different from side to side. I'm now considering adding an adjustable air system that can be operated from inside the truck.
by: Jason05/29/2019
Worked just fine. Had to purchase because truck had rough country 3" lift, although it only had 2" blocks for rear. Spacers seemed to be great quality. Was not impressed for how long shipping took. The bags only took 2 days. And it would be nice if there was a better warning I needed spacers for my air bags. It says compatible with lifts but that was it. So when I went to install, I had to take them back off and look it up. That's when I found they made spacers. I have to add I LOVE My Firestone Air suspension. When I hooked up to trailer, truck dropped 7"s. With airbags and 45lbs of air, dropped 2"s and ride was smooth.
by: David 09/26/2023
These spacers were the reason I chose Firestone Ride Rite over ReadyAir air helper springs, which would have required removal of my overload leaf springs. With the spacers that match my rear lift block spacers, it is a very easy installation.
by: Christopher11/12/2023
I have a 2022 Silverado 1500 LTZ Z71 and these were not needed. When installed, the bags were fully compressed and didn't give the required 5.5" of travel.
by: Terry07/08/2020
I just finished the installation of the air springs and spacers. All the parts were there, the instructions were easy to follow and all went well. I look forward to hooking up the fifth wheel or loading up with firewood. Thanks for the excellent service and the additional help answering my questions about the spacer kit to accommodate the lift on my truck.
Terry
7/9/2021
The air bags are holding up well with no problems.
by: Derek 06/24/2023
Great product. Does exactly what you ne ed.
by: David 04/26/2023
These worked great for use on my lifted truck.
2.5 rear lift , 3" front
by: Tyson08/19/2017
Top notch customer service! And product performs flawlessly time after time with 5k payload on spacers and airbags!! Couldn't be Happier Thank you ETRAILER!!!
by: Brett Winter04/29/2014
Etrailer was really helpful in finding the right product for me. The blocks installed easily and worked really welll
by: Pete04/25/2023
I didn't need them so I am returning th em.
by: Lynn 06/15/2023
Awesome service
by: Douglas 03/31/2021
I ordered the air bag extensions and they are still solid and working as they should. I got them on time no hassle at all.
by: Francisco 07/09/2020
These spacers were just what I needed after I modified the suspension on my old Chevy pickup. I bagged and 4 linked the rear but it was just a little too low, using these spacers got my ride height where it needed to be.
by: L. Maroney02/12/2014
Exactly what I ordered with super fast shipping. Can't wait for my extension brackets to come in and install it on my truck
by: Mark 04/01/2020
Quality part and quick delivery. I’ll definitely be ordering from etrailer.com again.
by: Edward 05/10/2021
Edward.c
5/11/2022
Still going strong
by: Keith 08/08/2021
Worked great on my AT4
by: jim b05/13/2014
worked good , a little hard to get a wrench on air bag bolt . but did as advertised.
by: Cate03/28/2020
Well built, arrived on time, and fit pe rfect.
by: Cody 05/08/2024
by: Robert L04/07/2024
by: Greg 10/06/2022
by: Angelo 01/25/2023
by: James 06/12/2023
25
33
Show More Reviews
See what our Experts say about this Firestone Accessories and Parts
- How to Measure To Determine Correct Firestone Lift Spacers for Ride-Rite Kit on 2018 Nissan FrontierTo determine if lift spacers are needed to install the Firestone Ride-Rite Air Helper Springs # F2558 on your 2018 Nissan Frontier SV 4x4, you'll need to measure the distance between the top and bottom mounting brackets (see photo). Make sure your truck has all four wheels on ground or is up on jack stands and there is no load on the bed. You will then select the right spacer using the following measurements: 6.5" - 7.5" distance between brackets - use 1.25" lift spacer # F2536 7.5" -...
view full answer...
- Spacers Needed to Install Air Helper Springs on Lifted 2000 Toyota TacomaTo determine the size of spacer that you will need to install # F2304, you will need to measure the space between the bottom of the frame to the top of the axle. If this measurement is 6-1/2 to 7-1/2 inches you would need a 1.25 inch spacer set # F2536. The other spacer kit # F2366 would be used if the distance between the brackets is 7-1/2 to 8-1/2 inches.
view full answer... - Air Suspension Enhancement Recommendation for 2004 Ford F-250The Firestone kit part # F2550 is the only air bag kit we offer that we know is a confirmed fit for your 2004 Ford F-250 and is compatible with an in bed hitch like a B and W Turnoverball # BWGNRK1108 like what you have. If your leveling kit lowered the rear of your truck we aren't going to have a way to install this kit though. If it was up to a 1 inch lift you'd be fine as-is. We have the 1-1/2 inch spacer part # F2536 for if you have a 1-1/2 inch lift or part # F2366 for a 2 inch lift.
view full answer... - How To Tell What Size Firestone Lift Spacers Are Needed On A Truck With A 6 Inch Lift KitTo determine what size lift spacer to use on your vehicle with Firestone Ride-Rite Air Springs, measure the distance between the upper and lower brackets of your air helper spring kit, and whether the kit mounts on the leaf spring or the axle. The spacer needs to be the same length as the amount of lift applied to the axle on which the air helper spring is installed. The axle mount kit would have the lower bracket mounted to the axle. The leaf mount kit would have the lower bracket mounted...
view full answer... - Rear Suspension Enhancement for a 2014 Silverado 1500 w/ Leveling KitIf the lift on the rear of your 2014 Chevy Silverado 1500 was only a body lift (sounds like it), and the suspension wasn't touched at all a lift spacer like the part # F2366 that you referenced wouldn't be necessary. The # F2430 would work well as-is. If you instead had a suspension lift you would want the lift spacer part # F2366.
view full answer... - Recommended Air Suspension Kit And Spacers For 2012 Toyota Tundra With 2 Inch LiftThe Firestone Ride-Rite Air Helper Springs, part # F2445 will work great on your 2012 Tundra. These help increase stability and improve the ride quality when carrying heavy loads in the truck. Since you have 2 inch spacers between the leaf springs and the axle you will need the Lift Spacers for Firestone Ride-Rite Air Helper Springs, part # F2366. These are designed for vehicles with a 2 inch lift and will eliminate the added gap from the spacers. To be able to adjust the air in the...
view full answer... - Does 2018 Ford F-150 Need Spacer with Firestone Ride-Rite Air Bags InstalledIf you only have 5 psi in the Firestone Ride-Rite Air Helper Springs # F2582 and the back end of our 2018 Ford F-150 is higher than the front, spacers would just increase that difference. Trucks aren't always level from the factory - that's why the instructions for the air bags have you measure and record the front and back heights individually and then compare them to what you get with the air bags installed. With that being said, if you think you might need a spacer there is a fairly...
view full answer... - Which Firestone Air Bag Spacers to Use on 2006 Silverado 2500 with 6-Inch Suspension LiftIf the spacing between the upper and lower brackets on your lifted 2006 Silverado 2500 is 10-inches as you indicate, this falls into the operating height range for the Firestone Lift Spacers # F2371. These are normally intended for trucks with a 4-inch lift, but if your truck's brackets are this distance apart these should work. I was not able to find any purchase history to confirm the air bag kit you're using but a long as it is a compatible Firestone kit these should work well. The...
view full answer... - Firestone Ride Rite Air Helper Spring Kit Recommendation for a 2008 Chevy Silverado 1500The Firestone air spring kit you will need for your 2 wheel drive 2008 Chevy Silverado 1500 would be the part # F2430. The correct spacer kit that you will need would be the part # F2366. This kit is designed for 2 inch lifts but it would work just fine on your 2-1/2 inch lift.
view full answer... - Will Installation of Firestone Air Bags on 2022 Ford F-150 With Tremor Package Require SpacersSince you have a 3" lift block on your 2022 Ford F-150 with the Tremor package you will need to use spacers. However, you will want a spacer that matches your lift block so the included spacer is not enough. More than likely you need the 3" lift spacers # F2367. This spacer is for vehicles with 3" lift and from 8.5" to 9.5" between upper and lower brackets. I recommend measuring to be sure. If you find that the distance is 7.5" to 8.5" then you will want the 2" spacer # F2366 instead.
view full answer... - Can Firestone Air Bags Be Installed On My Lifted 2022 Ford F-250 To Help With Sag While TowingI will start by saying the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs # F36ZR is definitely the correct set for your 2022 Ford F-250 and it will have no problems fitting with an in-bed hitch, so you are good there. However, the 3" lift does complicate things a little. This absolutely does not mean you cannot install this. It does mean you will need to get the upper and lower brackets install and then take a measurement though. The distance between these brackets will...
view full answer... - Which Lift Spacers for Firestone Ride-Rite Air Helper Springs Work On a 4 Inch Lifted TruckFor a 4 inch lifted truck, you would want to use the 4 inch kit # F2371, so that you are not adding a spacer onto another spacer. The 2 inch spacers, # F2366, that you have referenced, fit vehicles with 2 inch lift and from 7.5 inches to 8.5 inches between the upper and lower brackets. The 4 inch kit, # F2371, fits vehicles with 4 inch lift and from 9.5 inch to 10.5 inch between the upper and lower brackets. I have included a link to the installation details for reference.
view full answer... - Lift Spacers for Firestone Ride-Rite Air Bags On a Lifted 2016 Ford F-250Firestone has their 4" Lift Spacers # F2370 that will work with the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs # F2703. Be sure that your lift kit on your 2016 Ford F-250 has a 4" rear suspension lift. Some lifts will advertise a 4" lift but it will have a 4" front lift and only 2" rear as it levels the truck doing this. If that is what you have a 2" Lift Spacer # F2366 will be what you need.
view full answer... - Firestone Air Bag Spacers for a 1996 GMC Yukon With Body LiftSince spacers are brand specific, you would need to know what brand of air bags that you have so that you can install the proper spacers. From the picture that you sent, unfortunately there is no way to be able to identify the brand of air bags that you have. I reached out to Firestone to see if they could identify the air bags and they said that even though they couldn't identify them from the picture, you could use their spacers as long as the hole configurations are the same and the...
view full answer...
- Lift Spacer and Air Bag Kit Recommendation for 2007 Chevy Silverado New Body 2500I wish I could say yes that a Firestone kit would work but they attach differently so the install wouldn't really be feasible. We haven't hear of any issues with the Air Lift spacers though. Do you have the air bag kit installed already? Maybe you'd be better off with a Firestone kit and their spacers # F2366? The air bag kit you'd need is the part # F2250.
view full answer... - Will The SumoSprings SSR-610-40 Fit A 2018 Tundra With 1.25 Rear Lift ShacklesI spoke to SuperSprings and their SumoSprings Solo Custom Helper Springs # SSR-610-40 may work on your 2018 Tundra, but you will need to measure something to make sure as they are designed for stock ride height. When the # SSR-610-40 is installed, it will measure 6.25" tall. Typically there will be a gap that is anywhere from .25" to 1" from the top of the spring to the bottom of the frame where it will make contact. They said that a gap that is larger than 1", they may not work very well....
view full answer... - Spacer for Firestone Ride Rite Air Suspension Kit Installed on 2013 Toyota Tundra w/4 Inch LiftAccording to my Firestone representative, you'll need to measure the existing space between the upper and lower brackets once the lift has been completed. Ideally, you'd see about 6 inches between the two brackets. If that's the case, Firestone tells me a spacer won't be needed. If the distance between the brackets is greater than 6 inches, you'll need a spacer whose thickness is the same as the gap. For instance, if the distance between the brackets measures about 8 inches, you'd want...
view full answer... - Lift Spacers Needed For a 2019 GMC Sierra 1500 With 2" Lift and Firestone Ride Rite Air SpringsThe 1-1/4" Spacers # F2536 for the Firestone Ride-Rite Air Helper Springs # F2609 are for measurements of 6-1/2" to 7-1/2" between the upper and lower mounting brackets. You will need to measure the distance between with the mounting brackets installed on your 2019 GMC Sierra Denali 1500 to ensure you get the correct size spacer. The 2" Spacers # F2366 are for measurements of 7-1/2" to 8-1/2" between the upper and lower mounting brackets.
view full answer... - What Parts are Needed to Install a Firestone Ride-Rite System on a 2022 Toyota Tacoma TRD w/ 2" LiftSince you have a 2" lift you would need to use the Lift Spacers for Firestone Ride-Rite Air Helper Springs # F2366 to install a Firestone Ride-Rite Air Helper Spring System. The Firestone Ride-Rite Air Helper Springs # F2407 fits 4-wheel drive models with the axle below the leaf springs. The Firestone Ride-Rite Air Helper Springs # F2410 fits 2-wheel drive models with the axle above the leaf springs.
view full answer... - Will Firestone Air Bags Work on a 2015 Toyota Tacoma with Add-A-LeafThe Firestone Ride-Rite Air Helper Springs part # F2407 which are a fit for a 2015 Toyota Tacoma are designed to attach to the leaf springs so any modifications to these springs such as add-a-leaf could render the system incompatible so I cannot recommend this. That said, if the springs are added to the bottom of the pack this should not affect much expect for maybe the u-bolts so you might need to find a longer set. Furthermore, you'll also need a spacer to match the amount of rear lift...
view full answer... - Does A 2019 GMC Sierra 1500 X31 Need A Spacer Kit When Installing Firestone Ride-Rite Air SpringsThe X31 package for your 2019 GMC Sierra doesn't add any lift like the AT4 package does so you shouldn't need the Lift Spacers for Firestone Ride-Rite Air Helper Springs - 2" Spacers - Qty 2 # F2366. If for some reason the dealership installed a lift kit on the vehicle after receiving it from the factory you would want to first install the brackets of the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2609 and measure the distance between them to find the measurement...
view full answer... - Installation of Firestone Red Label Air Bags on 2012 Ford F-250 With Block Underneath Jounce StopInstalling the # F2703 on your 2012 F-250 will require moving the block in your picture. However, I'm not sure if it can be moved to the top of the jounce stop since we don't have any information on it and neither did Firestone. I recommend checking with the manufacturer before attempting to move it to the top. The other option is to completely remove it. If you are able to swap it with the jounce stop you can measure to see if a spacer will be required. You will need to measure the distance...
view full answer...
- Recommended Air Bags for 2022 Ford F-350The best air bags for your 2022 F-350 are the Firestone Ride-Rite Air Helper Springs # F35FV. These have a 5,000 lb load leveling capacity, four layers of reinforced rubber, and a rolled crimp seal to keep the bags anchored securely. Depending on your lift you will need to add spacers for installation to take up the additional space created by the lift. In order to determine the correct spacer you will want to measure the distance between where the upper and lower brackets would be located...
view full answer... - Recommended Suspension Enhancement for a Lifted 2021 GMC Sierra 1500 This will depend on how your 2021 GMC Sierra 1500 was lifted. If it was a frame lift, this will not affect the spacing on the suspension and the SumoSprings # SSR-610-40 will definitely be a good option. If it was a suspension lift, there will be too much of a gap and the # SSR-610-40 will not fit properly as they do not offer spacers. For this style of lift, you will want to go with an air bag system, like the Firestone # F2609. You would then need to measure from the bottom of the top...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Updated by:
Leah B
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Alex H
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Tyler C
Video by:
Joshua S
Test Fit:
Brent H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jason C.
5/30/2020
After a year, bags still work just as well as they did the 1st day. So far I still havent had any air leaks or blessing off. It stays where I put it. I have a half tone truck. I just hauled 1 12 ton of top soil with 60lb of air and truck rode level. Even the guy on the loader complemented suspension. Next I would like to add controls from the cab or my phone so I dont have to use the air hose every time to change it.