Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(346 reviews)
Price: $172.66
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75236
Retail:$257.80
Our Price: $172.66
You Save: $85.14
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (346)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75236
- Class III
- 2 Inch Hitch
- 5000 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 500 lbs TW
- 5500 lbs WD GTW
- 550 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 5,500 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 550 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75236 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87581 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2014 - 2015 Toyota Tacoma
- 2005 - 2013 Toyota Tacoma excluding X-Runner
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Defective
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75236
Average Customer Rating: 4.8 out of 5 stars (346 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Kent04/19/2018
2010 Toyota Tacoma
Just finished the complete installation of Draw-Tite hitch and Curt wiring harness on my 2010 Tacoma. I watched the eTrailer videos for both multiple times. Installation for both was exactly as described. My only challenge was the rusted bolts and nuts on this 8 year old truck. I spent about 3 hours spraying penetrating oil and slowly (and painfully) working bolts out and in. Lost my patience and rounded one head off (one out of 10, not too bad). I ended up cutting and grinding the factor weld nut off with a Dremel and replacing the factory parts with a functionally equivalent Grade 8 bolt and nut from the HW store. Wiring harness was a 30 minute job.
If I were to do this again I would go ahead and remove the bumper completely, and take the spare off as well.
eTrailer service was great - excellent videos and outstanding shipping - ordered Sunday and the package arrived Wednesday.
by: Guy 05/06/2024
Trailer hitch fit perfect! Packaging’s was a fit torn up by the time it got all the way to Hawaii!
by: Not Surprised07/06/2022
I have a 07 Tacoma 6Cyl. Off Road TRD with factory tow package hitch.
I called to confirm Item # 75236 was needed for replacement.
75236 looked nothing like the factory hitch on my truck. Again I called customer service.
I was told 75236 was the hitch for my truck.
The holes do not match up with frame or bumper.
I guess Im stuck with a expensive piece of black metal.
Not surprised.
Sierra K.
7/13/2022
The hitch looks different than the original, but have you tried installing the new hitch?
Mark
7/13/2022
As far as I know, it is original hitch installed from factory. I purchased the 2007 Tacoma in 2014. Its possible the hitch could have been replaced between 2007 and 2014 with a aftermarket. I did get the 75236 installed. Everything seems good. However, It was very difficult. I attached some pictures below. Thank You.
by: David F.02/04/2020
This piece of equipment is well made. The installation went very well in a small amount of time. The instructions were clear and concise. I was impressed with the overall process from start to finish. I will certainly recommend others to Etrailer.com.
by: Greg W.06/20/2016
I waited till the last minute to get my truck setup for trailer towing (moving my recent graduate to her new job/home). Used the express shipping. Everything arrived on time.
I installed this myself so it took a while (2 hours). A second set of hands would have helped. First tip: Use some tie down straps (flat nylon) and loop around your closed tailgate and the bumper. This will keep the bumper in place when you loosen the bolts. Second tip: I used a car jack from my wifes car to help lift the hitch in place. Balance the hitch on the jack and use some wire to hold it to the jack.
I also used a Curt no-splice wiring harness. This was simple to install. Hardest part was getting the darn connectors unsnapped.
Watch the vids on etrailer and anyone can do this themselves.
by: Gary05/30/2020
I put this bumper on by myself, but it will be easier as a 2 person project. If you do decide to DIY make sure you have the right tools for the job!!! I went old fashion with a breaker bar, deep sockets, 3” extension, ratchets and some PB blaster. A one hour job took me the whole day. Instructions are easy to follow, but I would also watch the video from e-trailer on installation procedures. I found it was best to loosen the bumper brackets closest to the bumper because you had better leverage than if you loosened following the instruction. A right angle impact wrench will be your friend because a couple of boos on the bumper are recessed towards the rear of the bumper and there is little room to maneuver with regular tools and extensions.
by: Adam09/21/2019
2007 Toyota Tacoma
My hitch arrived quickly, and installed as described without any additional modifications to my 2007 Toyota Tacoma. It will allow me to pull larger trailers than the bumper hitch, and more importantly this hitch will allow me to use a drop hitch to keep my trailers level. I still have to install the wiring harness, but I would recommend this Draw-Tite hitch to anyone with a Tacoma.
by: Scott W.06/07/2017
2014 Toyota Tacoma
I had received multiple quotes to install a hitch on my 2014 Toyota Tacoma. All were around $400. So I did a little research and found the etrailer.com site. I found I could buy the hitch, the wiring harness and ball myself for less. The installation video they provided me gave me the confidence I could do the install myself. Now it's on and the entire process couldn't have been easier. If you can use a socket wrench and screw driver you can install your own hitch. Piece of cake!
by: Chris H.08/20/2016
2012 Toyota Tacoma
Got my hitch in just about in the time frame I was suppose to. Pretty easy in theory to install but there is some advice to offer. Make sure you get some PB Blaster on those rusty bolts on the Tacoma. Those fine threads make it hard enough to ratchet off but when they got rust on them...oh boy does it take some time and effort. But it was an easy install outside of that and the wiring kit went really smooth. Very happy with this purchase.
by: Ronald 08/14/2023
Primarily used for a bike rack for 2 bicycles, used many times including a vacation to Maine, it worked flawlessly.
by: Steve L06/03/2020
Purchased this receiver hitch for my 06 Tacoma. Was approximately a 2hr install by myself, with socket set and a floor jack to support and hold the unit in place. Uses existing holes. Fit like a glove.
by: Katina09/11/2019
2005 Toyota Tacoma
Bought a new internal bumper support and hardware at the same time. I installed this by myself without a jack or lift. I was shocked when I had the whole bumper and receiver on in about 15 minutes. But I was lucky that I had a new Tacoma frame about 2 years ago so not too rusty. This product r seems very well built. I will have to drill a few holes to attach the 7 round plug plate.
by: Russell 04/16/2024
Best service
by: Corey 10/12/2023
Installation went well! Nothing too difficult. Would recommend having two people, and soak the bolts with a oil to help removal.
by: Justin W.07/12/2017
I love the hitch and wiring harness i purchased for my truck, installation was as easy as it said it would be and website videos were extremely helpful. Thanks to everyone at etrailer for all the hard work in providing the perfect accessories for my vehicle.
by: Michael09/01/2020
2007 Toyota Tacoma
Perfect fit. It looks great, mounted easily and performs as it should. Customer support at etrailer.com is awesome. They are quick to answer questions and provide advice.
by: David 08/22/2018
This hitch was easy to install. Ran into unremovable parking sensors on install, but held up bumper with two hydrolic stools. Ten bolts removed, 14 bolts replaced, easy.
by: Phil R08/18/2012
Quality product, fast shipping. Installation would be easier with two people, I installed alone using jack stands and a floor jack. Looks good on the truck, barely noticable... this is my third hitch purchase from etrailer.com.
by: Abel S.04/23/2017
2006 Toyota Tacoma
I put the hitch on yesterday. It fit perfect I was very pleased. The only thing wrong was the box that it came with.
by: daFigz™12/28/2022
2015 Toyota Tacoma
After receiving a recommendation from my local [mechanic shop] manager to check out etrailer, I purchased the Draw-Tite Max trailer hitch receiver. My overall experience remains positive because of the excellent website, price point, free shipping, and delivered product. While I haven't installed the hitch, I have no reason to doubt the quality, nor do I expect the installation to be complicated. Thank you, etrailer.
by: Mark03/28/2023
2010 Toyota Tacoma
No Lock washers for the FOUR MAIN bolts
Jenny N.
3/29/2023
Oh my goodness! Missing hardware is never fun to discover when installing. I will have our Customer Service team reach out to you.
by: Christopher P06/10/2019
2010 Toyota Tacoma
The price was right and the trailer hitch was delivered around about on schedule . The hitch is well made, good welds and pretty substantial in materials and build. It fit perfectly and had it not been for very rusty bolts holding the number to the frame bracket that had to be removed to fits the shims under them the fitting would have been straight forward and much quicker to install This is the fault of the Toyota bolts that have been through 9 BY winters and not a fault of the two hitch.I
The fitting instruction provided are not very clear but there is an excellent video on the etrailer web site that I used to guide me.
The only issue I have with the hitch is that there were a few small areas with exposed metal. I had some spray paint on hand so sprayed a few coats on a couple of days before I fitted it. I would recommend this hitch and etrailer.
Christopher P.
6/12/2020
It has stood up really well to the MY winter weather and all the salt that is copper on our roads. Very impressed still with the quality. Great product compared to my previous UHau Trailer hitch that list its paint inside acyeR. No such problem with my retailer not hitch.
by: JB06/22/2017
2009 Toyota Tacoma
This is the second car I have installed etrailer hitches on and both were easy to install and made of high quality material. My other hitch was installed
in 2009 and still looks like new. I installed this second hitch on my 2005 toyota tacoma truck. I plan on towing a small trailer or camper. I didn't feel
comfortable with a ball on the bumper. This hitch is so well made and designed that I now have peace of mind pulling a trailer. Needless to say, it fit like a glove.
Thanks so much.
James B.
6/22/2018
Well made product, performs very well.
by: James S.08/15/2019
2010 Toyota Tacoma
As advertised, the eTrailer website drilled down on the right hitch for my 2010 Toyota Tacoma. Although I let the guys at Meineke install, it took less than an hour and looks great, tight and even welding... My local Meineke guy use to work from the Toyota Service Center down the road and, even though I wanted him to consider upgrading the bolts/washer set provided, he had installed many and knew the bolt set with the hitch was good. Delivery in three (3) days. Great price...
James S.
8/16/2020
Time Proven Durability
by: Timothy 09/29/2023
Very happy with product. Even more happy with shipping!!
25
353
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Is Install of Trailer Hitch on 2006 Toyota Tacoma Same as Install in VideoGood question; your 2006 Toyota Tacoma is the same generation and model as a 2013 Toyota Tacoma, so the etrailer Trailer Hitch Receiver # e98850 will install the same way in both trucks. I added a link to that video, and also added a link to a video of the Draw-Tite Trailer Hitch # 75236 being installed on a 2006 Toyota Tacoma for you to reference. These are essentially identical installations so you can also use that video as a reference. I have added a link to the written installation...
view full answer... - Trailer Hitch and Wiring for a 2003 Toyota TacomaThe 2003 Toyota Tacoma and the 2011 Toyota Tacoma require different hitches so you would not be able to swap one hitch between the 2 years. For your 2003 Toyota Tacoma I recommend Curt hitch # 13013. This is a Class III hitch rated for 500 pounds tongue weight and 5,000 pounds gross trailer weight. When used with weight distribution it is rated for 600 pounds tongue weight and 6,000 pounds gross trailer weight. I have linked a video showing installation of this hitch for you. If you plan...
view full answer... - Recommended Trailer Hitch for 2012 Toyota Tacoma that will not RustWe do have several trailer hitches available for the 2012 Toyota Tacoma. I recommend the Draw-Tite Trailer Hitch, # 75236. I have included a link to the installation details and a video showing a typical installation for you to view. Hitches are made out of steel and are constantly exposed to the elements so they may eventually rust. Each manufacturer we offer coats the hitches with a paint that will prevent and ward off rust. If hitches are damaged or scratched and the metal is exposed...
view full answer... - Picking Out Rise/Drop Ball Mount for 2005 Explorer SportTrac Towing 15 Forest River Wolf Pup 16BHS I attached an FAQ that details how to pick out the correct ball mount. But without more info from you I cannot tell you exactly what you need right now. Picking out the correct ball mount will allow your trailer to sit as level as possible. This is not something that is vehicle specific. It depends on the hitch height and the height of the trailer coupler. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next,...
view full answer... - Why Would Trailer Hitch for 2014 Toyota Tacoma Seem to Small to Fit FrameMost likely the Curt hitch part # 13323 that you tried to install was bent in shipping as that hitch is a fit for your vehicle and unfortunately hitches do sometimes get bent in shipping. It's very easy for them to get bent in to make them seem to small too. Normally we recommend applying controlled force to bend the hitch back as long as you don't see any signs of fatigue in the metal like creases or paint flaking you would be fine. That being said the Draw Tite Hitch part # 75236 is...
view full answer... - Recommended Roof Rack And Hitch Mounted Goalpost For 2013 Toyota Tacoma To Carry LaddersWe should be able to come up with a solution that will work for your 2013 Toyota Tacoma. The roof rack you choose will depend on the style roof you have. If you have a naked roof with no existing rails or crossbars, I recommend the Rhino-Rack 2500 Series Roof Rack. This features 54 inch aero crossbars and custom clamps and pads. To order this system you need parts # RRVA137B-2, # RRRLKVA, and # DK174. The weight capacity for this rack is 165 lbs. If you have siderails that run front...
view full answer... - Comparing Curt and Draw Tite Hitch for 2008 Toyota Tacoma and Trailer Wiring RecommendationThe Draw Tite hitch part # 75236 and the Curt # 13323 are both really solid hitches for your 2008 Toyota Tacoma. They are so close in design that I'd honestly pick whichever had the best price as they'll both serve you the exact same. The best trailer wiring harness then will be the one with the highest amperage rating since you plan on having several lights installed on the trailer. Since you plan to have more installed on the running light circuit the Tekonsha part # 118496 is the way...
view full answer... - Will Curt Bumper Mount Trailer Hitch # E-3S Fit a 2007 Toyota Tacoma BumperThe Curt Bumper Hitch, part # E-3S, is made to attach to a truck step bumper. It is a universal fit design so it is not listed for a specific vehicle. The mounting holes are 8-1/2 inches center to center between the holes. If your 2007 Toyota Tacoma has a step bumper and has mounting holes with the 8-1/2 inch dimension then it will bolt to your bumper. If you do not have holes that will line up with the hitch then you can still use the hitch but you would have to drill new holes. I am...
view full answer...
- Is the Hardware Needed for Installation Included With the Draw-Tite # 75236Yes, all of the necessary hardware to install the Draw-Tite Max-Frame Trailer Hitch Receiver # 75236 to your 2009 Toyota Tacoma will be included. I have attached an installation video of this hitch being installed on a 2008 Tacoma that you can use as a reference.
view full answer... - Available Custom-Fit Class III Trailer Hitch and Wiring Harness for 2014 Toyota TacomaYes, we offer two options in a 2-inch Class III custom-fit hitch for your 2014 Toyota Tacoma, the Draw-Tite # 75236 and the Curt # 13323. Both share identical weight ratings and a common no-drill installation process, which is shown in the linked video. I recommend the Draw-Tite since it currently offers a lower price. For a 4-pole wiring harness, if needed, I suggest the Tekonsha custom-fit plug-and-play harness # 118496. An install video for this is included too.
view full answer... - Recommended Trailer Hitch and Towing Supplies for 2008 Toyota TacomaI'd recommend the Curt Class III receiver, part # 13323. The hitch offers a good balance of performance for the cost, when compared to the other hitches available for your Tacoma. The Curt model is just as strong as the Hidden Hitch and the Draw-Tite models, so you'll not sacrifice anything by going with the least expensive option. As far as a recommended installer, if you could reply with your City and Zip Code, I'll check with Curt and see who they recommend in your area. I've linked...
view full answer... - Does Drawtite Hitch 75236 Come with Bumper BracketsThe Draw Tite hitch part # 75236 does not come with bumper brackets. It installs between the bumper beams and the frame rails of the vehicle.
view full answer... - Trailer Hitch, Ball Mount, Ball, and Wiring Recommendations for a 2006 Toyota TacomaWe do have several trailer hitch available for the 2006 Toyota Tacoma, but # 41938 will not fit. For your truck, I recommend the Draw-Tite Trailer Hitch, # 75236. I have included a link to the installation details and a video showing a typical installation for you to view. The recommended ball mount is # AMSC2, and you can use pin and clip # PC3. For a ball, you can use # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 63847 (2-5/16 inch diameter). For Trailer wiring, use...
view full answer... - Availability of Replacement Installation Hardware for Draw-Tite Class III Receiver Part # 75236We can certainly get you that hardware. Use the product link I have provided, and once you are on the page, type the hitch part # in the provided box. Use the drop down menu to input the hitch manufacturer.
view full answer... - Differences Between Curt # 13323 and Draw-Tite # 75236 Class III Hitches for 2009 Toyota TacomaThe Curt # 13323 and the Draw-Tite # 75236 Class III hitches share the same weight capacity and installation procedure. The appearance and design of the two hitches are pretty similar. As far as quality goes, both brands are about equal. Given this, there's no reason why you couldn't go with the less expensive Curt model. If you were planning on towing with your Tacoma, you might also need the following: Trailer wiring harness, part # 118496 Ball mount, part # D-4 Hitch Pin and Clip,...
view full answer... - Recommended Trailer Hitch and Wiring for 2011 Toyota Tacoma Starting with the trailer hitch, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75236 referenced in your question will indeed fit your 2011 Toyota Tacoma PreRunner and is the exact hitch I would recommend. This Class III trailer hitch will use existing holes in the truck's frame for a no-drill installation. It will provide a 2 inch receiver opening and a 5,000 pound towing capacity, although I also recommend checking the towing capacity of the truck itself. This information will be listed...
view full answer... - Will the DrawTite Class III Trailer Hitch Fit The 2009 Toyota Tacoma Pickup What is the Tow CapacityYes the DrawTite Hitch, # 75236, will fit the 2009 Toyota Tacoma pickup except for the X-runner model. This hitch has a weight carrying capacity of 5000 pounds maximum and 500 pounds tongue weight. If you have a weight distribution system on your vehicle then the capacity is 5500 pounds loaded trailer weight and 550 pounds tongue weight. Even though the hitch is rated for these capacities you are limited by the lowest rated component, whether it is the vehicle, hitch, drawbar or ball. You...
view full answer... - Adding a Trailer Hitch and Sway Control Only to a 2005 Toyota TacomaThere isn't a good way to use sway control on the bumper on your 2005 Toyota Tacoma so the best solution is a frame mounted trailer hitch # 75236. This is a Class III hitch with a 2 inch receiver. Then you could add sway control bar # 83660 and you would need bracket # RP26003 to be able to use just the sway control. Since all you really need is sway control this is the best set up.
view full answer...
- Does Rear Bumper of 2011 Toyota Tacoma have to Come Off to Install Trailer HitchThe bolts that secure the bumper of your 2011 Toyota Tacoma will need to be removed to install the Draw Tite hitch # 75236 that you mentioned so basically the bumper does have to come off. If you check out the install video I attached you'll see us install this hitch on a similar 2013 Tacoma and our installer remove the bumper.
view full answer... - Options for Carrying 4 Bikes In a 2010 Toyota Tacoma Truck Bed with Rail Track Tie Down SystemWe do have some truck bed mounted bike racks that will work with your 2010 Toyota Tacoma with rail track system, but the Topline system will not fit because direct access to the bed rails is needed to secure the clamps. For in bed 4 bike transport you could use four of the Yakima BlockHead Single Bike Truck Bed Mounted Racks, item # Y01117. Another option for your truck would be a hitch mounted bike rack like the Thule Camber, item # TH9056. If you need a hitch for your truck we have...
view full answer... - Hardware Spacer Dimension for Draw-Tite Trailer Hitch 75236 for Toyota TacomaIf you look at the installation details the spacer block size is not given so I went to our warehouse to measure it for you. The spacer is 1.5 x 1 x 0.25 inches. I've attached a photo to assist.
view full answer...
- Availability of Bolt On Trailer Hitch for 2007 Toyota Tacoma Crew CabFor a trailer hitch for your 2007 Toyota Tacoma with easy bolt on installation without drilling I would recommend Draw-Tite Hitch # 75236. I attached installation instructions and an installation video for this product for you to check out. If you plan on doing some towing I recommend adding the etrailer Ball Mount Kit, # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring, use # 118496. I have included links to the instructions and...
view full answer... - Hidden Hitch Recommendation for a 2007 Toyota Tacoma Prerunner SR5For a hitch for your 2007 Tacoma PreRunner I would recommend a Draw-Tite # 75236. I attached installation instructions and an installation video for this product for you to check out. The Class IV Weld On Hitch # 41990-07 that you referenced is a universal hitch that is typically used for trucks with service bodys or utility bodys. However, there might be a way to install this hitch on your truck, but unless you have a service body I would recommend the # 87581. If you plan on doing some...
view full answer... - What Years Toyota Tacoma Does Draw-Tite Hitch 75236 FitI confirmed with Draw-Tite that the Draw-Tite Max-Frame Trailer Hitch Receiver # 75236 does fit all model years from 2005 through 2015 of the Toyota Tacoma (except the X-Runner model); that includes the 2.7L and 4.0L engine. I have added a link below to a video install for you to check out as well of the Draw-Tite Max-Frame Trailer Hitch Receiver # 75236. Additionally, if you also need a 4-way trailer wiring harness, the correct part for the same model years of Tacoma is the T-One Vehicle...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Jacob T
Video Edited:
Chris R
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Alan C
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kent
4/19/2019
No problems after a year of light use.