Using E-Track and Accessories in a 5 x10 Enclosed Trailer to Carry a Harley or an ATV
Question:
I have a 5x10 enclosed trailer and I want to set up the E track system to carry a Harley or an ATV. The floor is plywood with the steel trailer frame underneath. What would be the best way to set up the track to carry either, do I need to reinforce the floor. Thanks!
asked by: Tony M
Expert Reply:
In order to secure either a motorcycle or ATV I recommend 2 sections of E-Track # E19148 so that you can have one on either side of the motorcycle. This will be the most stable set up for the bike. The ATV really only needs to use one of the tracks to be secured using a wheel net with E-Track fittings, # 77314.
For the motorcycle I recommend using at least 2 of D-ring # 59131, assist straps # 06303, and some ratchet straps such as # 34414. I have included some links to videos on these parts for you.
Reinforcing the floor is a good idea. Or you can get several backing plates, # e96RR, to spread the force applied to the E-Track over a wider area. I would use at least 3 per E-Track section; one on each end and one in the middle.
Products Referenced in This Question
1" x 18" Tie-Down Motorcycle Assist Straps (Qty 2)
- Accessories and Parts
- Tie Down Straps
- Ratchet Straps
- Protective Gear
- Soft Loops
- Erickson
more information >
Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 2" x 6' - 1,333 lbs - Qty 2
- Ratchet Straps
- Trailer
- Truck Bed
- S-Hooks
- 2 Straps
- Retractable
- 6 - 10 Feet Long
- 1-1/8 - 2 Inch Wide
- 1201 - 1500 lbs
- Erickson
more information >
Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs
- Car Tie Down Straps
- 1 Strap
- Wheel Net
- 851 - 1200 lbs
- Erickson
more information >
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Accessories and Parts
- E-Track
- Tie Down Anchors
- E-Track Parts
- 6 Inch Wide
- Backing Plate
- 6 Feet Long
- etrailer
more information >
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Install E-Track in 3 Easy Steps
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Lid Options For A Dometic FV5300 RV Roof Vent
- Q&A: Differences Between Different Brands of E-Track
- Q&A: Can E Track be Used to Secure Car in Car Hauler Trailer
- Q&A: Where to Attach E-Track to Aluminum Bed Trailer for Max Holding Strength
- Q&A: Corrosion Concerns When Installing E-Track On Aluminum Trailer
- Q&A: Best 2 Inch Hitch for a 2023 Kia Sportage
- Q&A: Hardware Recommendations for Installing E-Track
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Choose the Right Trailer Hitch Class
- Article: Determining Trailer Tongue Weight
- Article: How (and Where) to Connect an RV Propane Grill