Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Toyota
(30 reviews)
Price: $17.84
In Stock
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Toyota
Item # 3031-S
Retail:$24.99
Our Price: $17.84
You Save: 29%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (30)
- Q & A (0)
- Photos
2023 Toyota Tacoma - Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Toyota
- Trailer Brake Controller
- Wiring Adapter
- Wired to Brake Controller
- Tekonsha
- Vehicle Specific
Streamline the installation of your trailer brake controller with this custom adapter. Simply connect the wires of the harness to your brake controller and then plug the other end into the built-in harness behind your 's dash.
Features:
- Pigtail wiring adapter eases installation of your electric trailer brake controller
- Connector end plugs into the built-in port beneath the dash of your vehicle
- Wire end connects to the wires on your brake controller with the included butt connectors
- Compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite, and Tekonsha
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
To install your electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the connector behind your vehicle's dashboard. The exact location of the plug may vary depending on your year, make, and model of truck.
To hook this adapter up to your trailer brake controller, just connect the 4 wires of the harness - ground, power, brake switch, and brake power - to the corresponding wires on the brake controller. If your brake controller came with a plug built into its wiring harness, you will have to cut off the plug and connect to the wires themselves.
3031-S Tekonsha Brake Control Pigtail Wiring Adapter - Single Plug - Toyota
Replaces Tekonsha 3017-S
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Too difficult to install
Customer Reviews
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Toyota - 3031-S
Average Customer Rating: 5.0 out of 5 stars (30 Customer Reviews)
Streamline the installation of your trailer brake controller with this custom adapter. Simply connect the wires of the harness to your brake controller and then plug the other end into the built-in harness behind your vehicle's dash.by: Hugh07/14/2020
Tekonsha 3031-S wiring harness adapter used for 2020 Toyota Tacoma (with tow pkg)
Vehicle specific wiring harness that plugs into factory installed connection behind kick panel on driver’s side. Color coded wires match the colored wires from your chosen brake controller purchase. Can use butt connectors and vinyl tape (or shrink tubing) to join this harness to your controller wires. Do not plug into vehicle until these wires have been properly connected and insulated to avoid shorting out. This product simplified the wiring procedure and avoids damage to electrical system. Vehicle’s factory connector shown in this review. Great product!
by: Jeff 05/10/2021
Toyota Tacoma
This plug and play wiring adaptor for my Tacoma worked perfectly with the Redarc Tow Pro Elite I installed. My 2020 Tacoma was pre-wired with a factory plug, and the Tekonsha wiring harness plugged right in. I wired the pigtails to the Tow Pro Elite and we were fully operational.
by: Dion06/10/2020
My Tacoma came with tow package but manufacturer doesn’t have an electric brake controller. I didn’t like the look of the after market ones until I checked etrailer. They carry The Redarc that tucks the controller under the dash with a nice looking, back lit , dial that fits in the dash with a factory finished look. Install was plug and play. Adding Roadmaster Helper springs really help to stabilize the Tacoma when towing my camp trailer, or when carrying loads in the bed of the truck.
Thanks etrailer.
by: Ch07/12/2020
Etrailer is the only place to go to for anything towing related. I always research comprehensively before I make a new purchase - etrailer makes it simple by providing product information through videos on its website. The representative was not only very knowledgeable of products she was able to get the to Redarc tow pro elite brake controller to me in just a few days. I will only order from etrailer and I let anyone I know in the market for their products how awesome they are!
by: Jason 04/01/2021
This adapter plugged right in to my 2020 Tacoma’s existing OEM tow package connector, and I simply connected the red blue black and white wires to a RedArc brake controller.
Side note: The RedArc Elite V2 worked once and quit on me.
Called RedArc about a year later and they replaced it with the Version 3 under warranty.
by: Dennis 06/06/2023
As advertised.
by: Emmett 08/12/2018
2018 Toyota Tacoma
Installed same day as I received it. Went in smoothly and am anxious to try it on our
next camping trip. We just purchased a 2018 Toyota Tacoma w/trailing package -- 4 pin/7 pin connector, engine cooler, power steering cooler, etc. However, we were not told that Toyota had not made the wiring harness for the brake controller for the Tacoma (just the Tundra). Thank goodness, etrailer and Tekonsha stay on top of the market. Thanks again.
by: Bradford 10/26/2022
2022 Toyota Tacoma
This adaptor fit my 2022 tacoma truck perfectly and works fine.
by: Mike M04/20/2020
Product works as described, no issues with instructions and issues with the product.
by: Justin05/14/2020
2020 Toyota Tacoma
This made wiring in my REDARC brake controller a breeze. My Toyota Tacoma already had its own harness and this made it simple to join the two together. Plenty of wire if you need it, I ended up trimming some.
by: Kevin07/15/2020
Everything came in quickly and installed relatively easily. I just wish there was a suggested mounting spot for the controller under the dash and a suggested ground spot for my particular vehicle also.
by: Derek08/30/2020
2020 Toyota Tacoma
This allowed the cleanest install for a brake controller that I found. Easy to install.
by: Shane 05/12/2020
2020 Toyota Tacoma
Easy, accurate and heavy duty brake controller connector.
by: Larry10/18/2020
Shipping was fast and affordable I purchased the switch mount and also the harness. After splicing the harness, installation was straightforward. The switch plate made for a professional appearance as well.
by: Brittany07/07/2019
2018 Toyota Tacoma
Did not fit 2018 Tacoma OEM port. Toyota changes the layout often so had to customize an open port for the Red Arc controller.
by: Cary O12/17/2019
Worked great. Etrailer staff are always helpful!!
by: Carlos07/12/2021
Plug and Play. That's the way to insta ll
by: Kenneth03/02/2020
2020 Toyota Tacoma
Just what I need for my 2020 Toyota Tac oma.
by: Peyton06/09/2021
Great! Easy to install and works exactly as described.
by: GLV07/22/2019
Works perfectly.
by: David 09/30/2018
My order was delivered in a timely matter and shipping was free. Couldn't be happier. Thank you for the great customer service
by: Martin 08/20/2021
Easy to install, great service!!
by: Brian 07/01/2020
Just what we needed, when we needed!
by: Jeremy W03/23/2019
Plugged right in, no issue with connecting the wiring to my truck
by: Randy 03/29/2020
2018 Toyota Tacoma
Works as advertised. No issues.
25
30
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Comparing Curt Spectrum and Redarc Tow-Pro Brake Controller for 2018 Toyota TundraBoth the Redarc Tow-Pro Elite # RED44FR and the Curt Spectrum # C51170 Trailer Brake Controller offer a sleek OEM design that gets away from the traditional knee knocker mounted options that take up a lot of space in the cab. Between these two brake controllers though I do recommend going with the Redarc # RED44FR for a couple of reasons. The first reason is an aesthetic one. One of the main benefits of both controllers is the subtle design that tries to blend in with the interior of...
view full answer...
- Recommended Wiring for Tow Package Activation on 2018 Toyota TacomaFor your 2018 Toyota Tacoma, the best way to get your tow package wiring if you have the facoty 7-way is to use the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR along with wiring adapter # 3031-S. This may require adding fuses to activate your tow package. I have looked at the owners manual online and they don't offer the location information, so you will need to check your manual that came with your truck. I've attached the instructions to assist and recommend the Tekonsha...
view full answer... - Recommended Parts Needed to Tow with a 2018 Toyota TacomaTo tow a trailer with your 2018 Toyota Tacoma I recommend using the Curt Trailer Hitch Receiver # C13264 along with the Curt T-Connector # C56349 wiring for a 4-Way Depending on the weight of your trailer and the guidelines in your owner's manual/local laws you may need to utilize brakes on your trailer. If this is the case then I recommend the Tekonsha OEM Kit # 22117 which will give you a 7-Way and brake controller connections. For a high quality brake controller I recommend installing...
view full answer... - Redarc Tow Pro Elite Brake Controller Recommendation for 2019 Toyota TacomaThe correct Redarc Tow-Pro Elite Trailer Brake Controller for a 2019 Toyota Tacoma is part # RED44FR. However, you will also need the Custom Wiring Adapter for Trailer Brake Controllers part # 3031-S. The Custom Wiring Adapter for Trailer Brake Controllers simply plugs in under your dash and then the other end with blunt cut wires gets connected to the Redarc Tow-Pro Elite Trailer Brake Controller using the supplied butt connectors. That said, the wires are the same color and there are...
view full answer...
- Making a Custom Brake Controller Wiring Harness for a 2015 Toyota Tundra and Hopkins Brake ControlHopkins only lists up to the 2012 Tundra for brake controller wiring harness # HM47815. What you could do for a Hopkins brake controller that requires a plug-in at the back is use harness # HM47685 to plug into the brake controller. Then use # 3031-S which is the end that plugs into the truck. Hardwire the bare wires together color for color and you have yourself a custom harness!
view full answer... - Trailer Brake Controller Wiring Harness Recommended for 2021 Toyota TacomaSure do! Tekonsha manufactures that brake controller for Raybestos, which we offer as part # 39510. In order to plug your pigtail equipped controller into the factory connector on your 2021 Toyota Tacoma, you'll need the # 3031-S wiring pigtail. The pigtail connects color for color to the wires exiting the rear of your controller, and would plug into the white connector which is located just above or behind the driver's side kick plate that sits next to your left foot when you're driving.
view full answer...
- How to Connect Hopkins Reliance Brake Controller to Toyota OEM Brake Controller PigtailIt sounds like you have the Toyota OEM brake controller pigtail. My industry contacts haven't encountered the OEM pigtail from the Tundra yet, so they weren't able to provide any guidance as to the wire color coding. You said that the pigtail used the same wire colors as the controller, is that correct? If so, the controller will likely wire up color for color. You'll want to test that, however. Use a circuit tester like part # PTW2993 on the pigtail after you've plugged it in with the...
view full answer... - Comparing the Curt Spectrum Brake Controller to Redarc Tow-Pro EliteBy all accounts the Curt Spectrum Trailer Brake Controller # C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our install team about this controller. First, compared to the Redarc controller # RED44FR, the Curt Spectrum is easier to install. It can be surface mounted meaning that drilling is not necessarily required (depends on how you run the wiring)....
view full answer...
- Redarc Tow Pro Elite Brake Controller Recommendation for 2019 Toyota TacomaTo install the Redarc Tow Pro Elite # RED44FR in your 2019 Toyota Tacoma all you need is the correct install harness part # 3031-S and you'd be set. This is a really great brake controller for the reasons you mentioned. It works really well and only requires you to mount a very small knob on the dash or center console so you get a very clean look when installed. I attached a picture that shows what it would look like installed as well.
view full answer...
- Should Proportional or Time-Delayed Controller be Used for Towing a Horse Trailer with a 2018 TacomaIf you are towing on level ground or rolling hill areas then a proportional brake controller like the Prodigy P3 # 90195 is preferred. This kind of controller senses the deceleration of your tow 2018 Toyota Tacoma and applies the brakes in your horse trailer at the same time and with the same intensity as the brakes in your Tacoma. This gives you a very smooth braking experience that your horses will appreciate. Really one of the only times that a time-delayed controller like the Pilot...
view full answer... - Redarc Tow-Pro Elite Brake Controller and Wiring Harness Recommendation for 2019 Toyota TacomaThe Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR is a really smart choice for your 2019 Toyota Tacoma and you can get the correct wiring harness, which is the Custom Wiring Adapter - Toyota # 3031-S. You'll just plug this adapter into the port on your Tacoma and then attach the control knob to the harness via the included butt connectors. And to answer your other question about the mounting panel, that is absolutely available for your '19 Tacoma with the Mounting Panel for...
view full answer...
- Troubleshooting Install of Brake Controller Where Stoplights are Illuminated All the TimeDid you use the install harness part # 3031-S which requires connecting the harness to the brake controller, or did you use the # 3031-P which connects from the back of the controller to the port under your truck's dash? It sounds like you have a short between some of the brake controller wires which I suspect is between the black and red wires as this would put voltage from the battery onto the stoplight circuit switch and might activate the brake lights. I also attached a help article...
view full answer... - Mostly Hidden Trailer Brake Controller Recommendation for 2020 Toyota TacomaThe best brake controller solution we have for you and your 2020 Toyota Tacoma is the Recarc Tow Pro Elite part # RED44FR with the custom install harness # 3031-S. Unlike other brake controllers this one only puts a really small knob on your dash (or center console if that's what you prefer) that you'll use to control it with the module/brain mounting out of plainsight. The picture I attached shows what it looks like installed to give you an idea. I also attached a review video for this...
view full answer...
- Is Wiring for the Tow Pro Elite the Same as Brake Controller Harness for 2015 Toyota TundraYes. Brake controllers are one of the few times you can completely rely on wire color. The # 3031-S harness that fits your 2015 Toyota Tundra uses the same wire colors as the Redarc Tow Pro Elite, part # RED44FR; black for power, white for ground, red for input from the stop light switch, and blue for output to the trailer brakes.
view full answer... - 2015 Toyota Tundra Brake Controller Installation Harness RecommendationThe difference between the # 3031-P and the 3031-S is that the 3031-P has a plug on the end of the harness to directly plug into a Tekonsha brake controller like the P2 # 90885. Whereas the 3031-S will also plug into the port of a 2015 Toyota Tundra and then would hardwire to a brake controller that has 4 blunt cut wires. Basically, if you have a Tekonsha brake controller you would need the # 3031-P and if you have any other brand controller you would want the # 3031-S.
view full answer... - Which Brake Controller Install Harness Fits 2020 Toyota TacomaWe have brake controller install harnesses that fit your 2020 Toyota Tacoma with the # HM47816 that you referenced.
view full answer... - Parts Needed to Install Redarc Tow Pro Elite in 2020 Toyota TacomaThe correct brake controller install harness for the Redarc Tow Pro Elite part # RED44FR in your 2020 Toyota Tacoma is the part # 3031-S.
view full answer... - Load Resistors for 2018 Toyota Tundra and 2010 Airstream with LED Lights to Remove ErrorThe load resistors # DI34ZR put out 6 ohms resistance each and you most definitely can install them yourself. I've attached a photo of the correct installation method to assist. They will get warm to the touch but you can absolutely install them on the inside of your RV where the wires come in from the tow vehicle. I wouldn't put anything right up against the fins as that would further reduce cooling and increase heat, but you won't have any issue in the location stated. The 7-Way...
view full answer...
- Brake Controller Recommendation with Small Dashboard Footprint for 2017 Toyota TacomaFor vehicles with not much free space on the dash like your 2017 Toyota Tacoma we have a great solution. The Redarc Tow-Pro part # RED44FR installs with basically only a knob visible that can go virtually anywhere on your truck's interior. The module (brain) of the controller mounts out of site and the knob is what you'd use to control it. If you check out the picture I attached you'll see the knob pointed out. For a vehicle specific harness for this controller to install in your 2017...
view full answer...
- Brake Controller Recommendation for 2019 Toyota TacomaBoth the Redarc # RED44FR Tow Pro Elite and the Curt # C51170 Spectrum controllers are similar in that they're designed so that the controls blend into the vehicle interior without having to drill into the underside of the dash to install a controller that you'll later lacerate your knee on. Both controllers use a small knob that can be mounted pretty much wherever it would be within the driver's reach. Now the differences. The control knob of the # C51170 is definitely larger than that...
view full answer... - How to Wire the Reese Brakeman Brake Controller On a 2020 Toyota TacomaWhile we don't carry the Reese Brakeman the hookup for brake controllers is pretty much the same across the board, so you'd need to connect the white wire from the brake controller to the vehicle ground, the black from brake controller to the 12V power wire to your vehicle, the red wire from the brake controller to the stop light switch which you said you've already identified as the small purple wire, and the blue wire from the controller to the blue trailer brake wire on your vehicle. I've...
view full answer... - Compatible Brake Controller Wiring Pigtail for 2020 Toyota TacomaSince you currently have the Tekonsha adapter for your Jeep, it is easy to get you the part you need. It is the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Toyota # 3031-S for your brake controller and 2020 Tacoma.
view full answer... - Pigtail Brake Controller Wiring Adapter for 2019 Toyota Tacoma to Splice to Brake ControllerWe do have a wiring adapter with a pigtail that will allow you to splice it into a brake controller and that will fit your 2019 Toyota Tacoma. The part you need is the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Toyota # 3031-S. You will simply splice the wires color for color to the brake controller with the included butt connectors.
view full answer... - Recommended Supplemental Braking System for a 2005 Jeep Wrangler Towed With a 2020 Toyota TacomaThe Brake Buddy Stealth Supplemental Braking System # HM39530 is currently the only style brakes for a flat towed vehicle that is controlled by a brake controller. You must use the brake controller which comes with this kit as it has different modes for trailer or flat towing unlike the Tekonsha controller you have. The Tekonsha Custom Wiring Adapter # 3031-S will allow you to wire in the Brake Buddy controller and connect it to the factory connector on your 2020 Toyota Tacoma. I recommend...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mike M.
4/21/2021
working as expected for 1 yr.