Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(54 reviews)
Price: $177.85
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Retail:$272.60
Our Price: $177.85
You Save: $94.75
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (54)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 200 lbs TW
- Custom Fit Hitch
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Bolt-on installation - no welding required
- Uses existing hardware
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Drawbar and pin and clip sold separately
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
24967 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe
Replaces Draw-Tite 24847
Item # 24967
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2015 Toyota Prius
- 2012 - 2015 Toyota Prius Plug-in Hybrid
- 2012 - 2017 Toyota Prius v
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
Customer Reviews
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24967
Average Customer Rating: 4.7 out of 5 stars (54 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.by: Andy C.04/30/2020
I ordered the hitch and it works great. I installed it myself (2014 Prius V) but I did have a hard time finding the correct bolts for it. I thought it came with bolts but it did not. Make sure you have the correct hitch for your car and the necessary installation items, including a torque wrench, before you attempt installation.
by: James09/21/2023
I would give this 5 stars but for two small areas of chipped powder coat. If left untreated these will rust, so I will g3t some black nail polih and touch up.
Jenny N.
9/25/2023
Oh no! I know that you painted it however I will still have Customer Service team reach out to you.
by: Zach01/16/2020
Easy install. Great fit. Works perfectly. Hidden behind bumper except for the receiver itself.
I use for a platform bike rack.
Only complaint is that there is a little wiggle room in the receiver, so rack bounces around a bit, but that’s the case with all hitches, so no star deduction.
by: Chris S10/11/2018
2015 Toyota Prius
product worked great. Instructions could be clearer, especially where to cut. etrailer staff are awesome. This is the second hitch I've purchased for a prius, based on their recommendation and I'm not disappointed. I will go to etrailer in the future.
by: Shel08/09/2018
2015 Toyota Prius
Perfect fit for 2015 Prius V. Quite stealthy.
Unable to self install as I lacked exhaust hanger tool. But trailer rental place did it for $48 w/o wiring.
Your wire kit is vehicle specific and better than theirs and I did that part.
Will use it to pull light trailer with train modules to shows or bicycle rack.
by: Michael06/23/2020
2012 Toyota Prius
2012 Prius
Easy enough installation on a lift. Needed some longer 12mm x 1.25 bolts - but no big deal.
I chose this hitch because it is flush with the bumper, just as others have reported.
by: Merv06/29/2019
this hitch fit perfectly on my 2017 Prius V. My wife and I are 72 years old and we put it in and wired it together. This is our second install. The first draw-tite was on our 2004 Corolla. All went well. We are just getting too old to be crawling around on the floor!
Merv and Charlotte Smith
by: Richard 08/20/2021
RE: 24967 The original/factory M12-1.25 x ~28 mm long bolts not really long enough on muffler side. I ended up cutting off washers off the factory bolts to get a few more mm threaded. Would have been nice if the kit had included longer (4) M12-1.25 x ~32 mm bolts.
Also, the trim diagram was pretty imprecise where the hitch receiver drops through.
Otherwise, its a great design!
Richard
8/22/2022
Works great. I like this design because the cross bar is hidden mostly under the trim in my 2013 prius.
by: David 08/05/2020
Toyota Prius
The hitch looks well built. Installation was smooth, the bolt holes matched perfectly. After mounting the hitch, i had to trim alittle more of the plastic cover to make it fit, but a sharp box cutter does that easily. I like that the cross member is hidden and only the receiver is exposed. Bought this to mount a bike rack to the prius, and am very happy with the results. Thanks, Dave
Dave
8/6/2021
Works good, the finish looks new. Good hitch
by: Leslie S03/14/2018
2015 Toyota Prius
Minor trimming of plastic pan under vehicle, 2015 Prius.
Leslie S.
3/14/2019
How is my product working after one year? Well, no bikes have fallen off.
by: Bill04/12/2022
2015 Toyota Prius
This hitch receiver fit right onto my 2015 Prius. A Prius is absolutely NOT recommended for towing trailers, so this hitch and ball provide rear end protection and an emergency recovery anchor point as needed. It's also nice to have a bar of solid steel across the underside of the back of the car.
I have used the center of this hitch platform to jack up the back end of the car. I also step on top of the hitch ball on multiple occasions in order to gain a little height or reach.
Installation was not difficult. Only had to cut a little triangle out of the plastic underbody pan with a tin snips. Having an air impact wrench made it easy to remove the factory bolts, but I'm guessing that a breaker bar on a socket would probably suffice. (HINT: If you don't have these tools in your garage yet, get serious and buy them. They're lifetime, durable goods which will save you tons of money in your future. You won't use them every day, but you don't have to justify their purchase either. Your grandchildren will be fixing stuff with these very tools which you buy today and using the skills you will learn and then teach to them. Every machine is basically nuts and bolts. You'll see what I mean...)
Best attribute about this hitch platform is that I can remove the hitch ball tongue whenever I want to avoid any chance of bumping a shin. In a year, I have never felt the need to do so. I know it's there. The thought that careless drivers parking too close to my car will hit the trailer ball before their car touches my bumper is another reason I leave the ball tongue installed. It keeps other cars at arm's length on the road and in parking lots.
My ultimate plan is to weld up a cargo basket to slide into this hitch receiver. Being that it's only a 1" receiver opening, I will fabricate some bars which will quickly attach to the ends of the receiver hitch frame to help balance the small loads that I will set in the hitch basket. These loads will be light weight, stinky/dirty things which I don't want to transport inside the car like trash/recycle containers, 5-gallon gas can, etc.
I can fully recommend this hitch frame to anyone with a standard 2015 Prius.
by: Dan 07/05/2022
2015 Toyota Prius
Great trailer hitch! Works well on my 2015 Plug-in Prius. You do have to do a little cutting out to get it to fit, but it's worth it. Solid, stable, and does well with my Kuat 2 bike rack.
by: Peter 08/08/2021
Toyota Prius
I had an excellent previous experience installing a hitch from eTrailer on my Acura RSX. But, unfortunately, I didn't watch the at the installation videos to put this Draw-Tite hitch on my Toyota Prius until after the hitch arrived. It's pretty involved! When they got to dropping the rear part of the exhaust system I had to turn it off. Scared me enough that I haven't taken the hitch out of the box yet. I'll bet it's a great product and maybe I'll give the installation a try when I've got a few free hours....
by: Val 12/06/2021
2015 Toyota Prius
I bought the Draw-Tite Sportframe receiver hitch for Christmas, for my daughter, mainly to be used for her bike rack. I installed it for her on her 2015 Prius V. It was a perfect fit and a very easy installation. High quality product, and very efficient ordering and delivery from eTrailer.com. This is my second purchase from eTrailer, with my first experience being just as good as this one.
by: Steve 08/18/2020
The construction is great and hitch is solid. Installation was straightforward but did take some finesse. It helped that I had a friend that worked on cars so I had ramps and access to the right tools. Our bike rack mounts really nicely now!
by: David07/24/2018
2012 Toyota Prius v
Good trailer hitch and fairly simple to install. Unfortunately, it doesn't include the bolts that you need. One of the bolts that they instruct you to reuse wasn't long enough and I had to go on a wild goose chase to purchase a longer one. All the videos regarding trailer hitches share that you will also receive new bolts for the install.
by: Stuart 02/01/2021
2013 Toyota Prius v
Good product, just as described. Aligned and fit my car perfectly. The video was very helpful.
The one comment is there was an aluminum foil heat shield between my muffler and gas tank. In order to make the hitch fit I had to modify around the mounting point. No big deal because it was easy to temporarily bend out of the way. This is worth mentioning because it was not mentioned in the video.
Yes I would buy again!
by: Don L.03/24/2018
2010 Toyota Prius
Awesome product, newer hidden design which is comparable to another Company hitch that cost twice as much. My Prius V does not have a plastic cover so no trimming to deal it.
One thing I suggest is on the exhaust side, the two mounting bolt that are suppose to be reuse to secure the hitch become shorter due to the added thickness. My Machanic worried that might give it less strength so he went and got me two longer bolts and not reuse the original. Notice these bolts from Toyota has 4 lines marking on top, that mean it is a grade 8 bolt, if you gonna replace it, it should that grade or stronger. I use grade 10 bolts. Overall a very good hitch with great value.
by: Will H01/06/2020
This is my second hitch. The first one was not the hidden hitch. Installation was easy, but it does require the extra work to cut out the hole for the hitch to swing under the bumper. I use this to tow small utility trailers, a teardrop, or to carry my bike. Overall it's a great product.
by: Chris05/15/2018
2012 Toyota Prius
The hitch works great and looks great. The only problem I had was cutting out the cover under the car. The pictures and directions weren't that clear. It was more of a guessing game and that probably took the longest portion of installing the hitch. It would be helpful if they cleared that up a little bit.
by: Nat S.06/13/2021
2014 Toyota Prius
Overall excellent hitch. I love that it is entirely tucked up under the bumper. Removing the underbody panel was a bit of a pain, but that is Toyota's fault, not this product's.
Only issue was that, with the hitch in place, the existing 30mm M12x1.25 bolts were not long enough to fully engage the threads in the car on the passenger side. I could only screw them in a few turns. Not a big deal - I ordered 40mm long Class 10.9 bolts with M12 washers from Bolt Depot.
Also, the heads of the existing bolts required a 17mm socket to remove, not 19 as per the instructions.
by: James 04/17/2020
2010 Toyota Prius
etrailer.com is da bomb! That was one of the easiest shopping experiences ever! Their online parts match/fit is spot on and I couldn't find this hitch cheaper, anywhere, with free shipping...and shipping was lightening quick! I used their helpful video reviews, advice, and instruction, I nailed it!
Thank you!
by: Braian T05/12/2020
It was easy to install, as always etrailer provides good instructions and videos. No issues with it so far. I did buy longer mounting bolts [online] because if you reuse the ones from the Prius they are too short. fyi
by: John D01/13/2021
2012 Toyota Prius
A few other reviews mention needing longer bolts, but I had no issue with the factory bolts from the exhaust hanger and tie down hook. I also didn't remove the exhaust from the hanger. I just unbolted the metal bracket and left the rubber connectors in -place.
by: Steve 02/23/2023
Took me a bit longer to install than the estimate, but am happy with the result.
25
54
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Recommend Ball Mount For Towing Light Trailer With 2014 Prius V With Draw-Tite Hitch 24967We have not had a chance to install the Class I Draw-Tite Sportframe Trailer Hitch Receiver part # 24967 but we were able to install the Draw-Tite on a 2016. The ground clearance with the hitch installed on the 2016 was 12-1/4" which will most likely be the same on your 2014 Prius V give or take if there is a tire size variance. Please keep in mind the Class I hitch is only capable of towing 200 lbs tongue weight. You will need a ball mount with at least a 1-3/4" rise if you install the...
view full answer... - Draw-Tite Trailer Hitch Receiver Tongue WeightYes, you should be just fine with that weight. I show two Draw-Tite trailer hitches available for your 2014 Toyota Prius, # 24967 and the # 24847, each with a 200 lb. tongue weight and 2K tow weight. I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24847 because it sets out slightly more than the other, providing just a little more clearance for your accessories.
view full answer... - Can you Attach a Class 2 Accessory on a Class I Hitch?The difference between a class 1 1-1/4 inch hitch and a class 2 1-1/4 inch hitch is that the class 2 has about 350 pounds of maximum tongue weight (as opposed to the class 1's 200 pounds). Some class I hitches have a stop tab inside that blocks class 2 accessories. That being said, the Swagman Chinook Bike Rack for 2 Bikes # S64683 will fit the Draw-Tite Sportframe Trailer Hitch Receiver # 24967 since the Chinook is also rated to fit 1-1/4 inch class 1 trailer hitches.
view full answer... - Which Draw-Tite Trailer Hitch Receiver Fits a 2015 Toyota PriusThe Draw-Tite # 24847 is a fit for your 2015 Toyota Prius. The # 24808 is actually for older models of the Prius from 2004 to 2009. Another hitch that fits is part # 24967. The insallation is more detailed and time consuming but in the end I prefer this style. It's a much cleaner look because the cross tube is hidden behind the Toyota's bumper and all you see is the receiver tube underneath. Look at the darker colored Prius in the pictures, as opposed to the blue Prius where you can...
view full answer...
- Reinstalling Draw-Tite Receiver Hitch on 2015 Toyota PriusFirst I recommend getting new hardware Kit # RHK. The mounting hardware does weaken due to being stretched during tightening. There does appear to be 2 different Draw-Tite Hitches for your Prius. The Draw-Tite Sportframe Trailer Hitch # 24847 installation instructions are located on the product page with correct torque specifications. The Draw-Tite Sportframe Trailer Hitch # 24967 installation instructions are located on the product page with correct torque specifications.
view full answer... - 2016 Toyota Prius Four Touring Trailer Hitch RecommendationFor your 2016 Toyota Prius Four Touring the Draw Tite hitch part # 24967 is the best option as it has mostly hidden appearance and the best ground clearance. The hitch would have capacity for a lightweight trailer and the install is very basic. I attached an install video for more info. Then for trailer wiring you'd want the part # 118610 which installs easily and is very reliable. Then for a ball mount you'd want the part # 3593 and for a hitch ball # 19256.
view full answer... - Why is There only 2 Bike Racks for Class I Hitches for 2010 Toyota PriusFor your 2010 Toyota Prius there are only Class I 1-1/4 inch hitches like the Draw Tite part # 24967 and for this hitch classifications there are only 2-bike racks like the Hollywood Racks Trail Rider part # HR200Z due to the lower capacity hitch not being able to handle the additional weight and leverage of the longer bike racks.
view full answer... - Hitch Receiver Extension for Draw-Tite Trailer Hitch # 24847 On 2012 Toyota PriusThe Draw-Tite Trailer Hitch # 24847 is a good fit for your 2012 Toyota Prius and the receiver will not jut out past the fascia once installed. I have provided a graphic showing the end of the receiver in comparison to a Prius as well as a Prius V. I have also provided a link to the installation instructions for this product as well as a link to a video showing the installation of this hitch on a 2010 Toyota Prius. While not the same model year as your car, the installation technique is...
view full answer...
- Recommended Trailer Hitch Receiver For 2012 Toyota Prius v To Carry Thule EasyFold XT TH903202Both the Draw-Tite Trailer Hitch Receiver # 24967 and # 24847 you were looking at for your 2012 Toyota Prius v measure over 1-1/2" from the center of the hitch pin hole to the front edge of the receiver so you will have no issues using the Thule EasyFold XT Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches - Frame Mount # TH903202 you mentioned. Between these two racks I recommend the # 24967 as it has a crosstube that sits further underneath the vehicle and will be less visible while...
view full answer... - Can I use the Thule Helium Pro on my 2012 Toyota Prius?Yes the Thule Helium Pro 2 Bike Rack - 1-1/4" and 2" Hitches - Tilting - Aluminum part # TH9042PRO will work out on your 2012 Toyota Prius. The shank on the rack is designed to work with both the 2" and 1 1/4" hitches. It is also lightweight so it helps with the lower capacity of 200 lbs. tongue weight that the hitches offered for your Prius has. If you've already got a hitch on your Prius you're set. If you don't the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class...
view full answer... - Recommended Hitch and Wiring Harness for a 2014 Toyota Prius VYes, the Draw-Tite Sportframe Trailer Hitch Receiver item # 24967 does fit your 2014 Toyota Prius V. This hitch is custom fit and bolts to your Prius V with included hardware. If you plan on towing you will also need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118610. For a ball mount you'd need the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.
view full answer... - Comparing Trailer Hitches for 2017 Toyota Prius vThe difference between the two hitches you were asking about for your 2017 Toyota Prius v are that the Draw-Tite # 24847 has a visible crosstube while the Draw-Tite # 24967 does not, as you can see in the accompanying photos. As for the distance from the end of the receiver to the edge of the bumper that can vary slightly though as you can see from the photos the difference between the two hitches will be minimal. The other difference is that because the Draw-Tite # 24967 has a hidden...
view full answer...
- Options for Carrying 3 Bicycles with 2013 Toyota Prius CThe Draw-Tite Trailer Hitch Receiver, # 24967, that you mentioned, as well as the others available for your 2013 Toyota Prius C, are all Class I trailer hitches. Due to the low tongue weight capacity of the Class I hitch, both the bike rack and the hitch manufacturers agree that no more than two bikes should be carried on a Class I hitch. Adding additional bikes would place too much weight too far away from the receiver opening, and would exert enough leverage on the hitch that it could...
view full answer... - Recommended Trailer Hitch and Wiring for Towing a Trailer with a 2013 Toyota Prius Plug-In HybridThanks for reaching out! The wiring I recommend for your 2013 Toyota Prius Plug-In Hybrid is the T-One Vehicle Wiring Harness # 118505 which tees in behind your tail lights and then pulls power directly from your battery with the included power wire. This means that your regular vehicle lighting will be really well protected. If you don't already have a trailer hitch then we have 2 options that I recommend looking at; the Draw-Tite # 24967 and the EcoHitch # 306-X7178. These have hidden...
view full answer... - What Do Hitches for 2017 Toyota Prius V WeighThe EcoHitch part # 306-X7192 weighs 28 lbs. The Curt part # C11276 weighs 31 lbs and the Draw Tite # 24967 weighs 21 lbs.
view full answer... - Can an Enclosed Cargo Carrier be Used with a Class I Trailer Hitch on a 2015 Toyota PriusAll of the trailer hitches for the 2015 Toyota Prius are Class I hitches. Out of the available options I recommend Draw-Tite hitch # 24847 or # 24967 since they do not require the use of a stabilization strap like the Curt hitch. Then you could use Curt cargo carrier # C18110 with cargo bag # e98990. This is as close as you can get to an enclosed cargo carrier on a Class I trailer hitch.
view full answer... - Draw-Tite Trailer Hitch and Swagman Bike Rack Compatibility with 2010 Toyota PriusThe Draw-Tite # 24847 will sit below the bumper of your 2010 Toyota Prius, where the Draw-Tite # 24967 will have a hidden crosstube. I've attached a photo for comparison. They are equally easy to install and have the same capacity ratings. The 13 inch measurement from the ground to the top inside of the receiver you mentioned means you will have about 11-1/2 inches of clearance from the bottom of the chain loops to the ground. You are correct that the receiver will stick out about...
view full answer...
- How to Carry Extra Cargo on 2012 Toyota Prius with SunroofThe roof rack selection that fits a 2012 Toyota Prius won't be compatible with a sunroof, but we do have other options for transporting some extra cargo. You can install a hitch like the 1-1/4" Draw-Tite # 24967 or EcoHitch # 306-X7178 to utilize a hitch mount carrier, or if you're wanting to transport some bikes without installing a hitch receiver you can use a trunk mount rack like the Yakima FullBack # Y02634. If you can give me some more insight into what you're needing to use a roof...
view full answer... - Hitch Bike Rack Recommendation for 2015 Toyota PriusWith the Curt Class I hitches you have to use the stabilizer strap when carrying a non-supported load like a bike rack otherwise you will void the hitch warranty. The easy solution for that is to go with a Draw Tite hitch part # 24967 instead as this hitch does not have that requirement and would work well with the Curt bike rack part # C18085 you mentioned. In this price range the Hollywood Racks # HR200Z is a way more solid option that I would recommend for you over the Curt. This will...
view full answer... - What are my Options for Bike Racks for a 2017 Toyota Prius C?For your 2017 Toyota Prius C, a hitch mounted rack requires installing a trailer hitch onto your vehicle, but adds flexibility to your vehicle's abilities to haul loads in addition to conveniently carrying your bikes. If you want to have a hitch mounted rack, you will want to pick a hitch. The 2017 Toyota Prius C has Class I hitches, like the popular Draw-Tite Hitch, part # 24967. A Class I Hitch can never carry more than two bikes at one time because of the way that the weight rides on...
view full answer... - Comparing Trailer Hitches that Fit a 2017 Toyota Prius vWe currently carry four trailer hitch receivers that fit your 2017 Toyota Prius v and the best one for you depends on what you're using it for. For example, the EcoHitch, part # 306-X7192, is the best option if you're going to be using the hitch to carry a cargo carrier or bike rack because the hitch pin hole sits closer to the rear bumper so whatever is in the hitch has a higher chance of clearing the bumper. It's also the only one that's a 2 inch receiver and there are more hitch accessories...
view full answer...
- Trailer Hitch Recommendation for 2014 Toyota Prius Plug-In HybridThe Curt hitch part # C11276 that you referenced is a confirmed fit for your 2014 Toyota Prius Plug In and would do a great job to carry a bike rack. The only other solution I might recommend instead for your vehicle is the Draw Tite part # 24967 since only the hitch opening hangs below the rear bumper which gives a more concealed look and also gives better ground clearance. While we don't carry the Allen bike rack you mentioned it's not a terrible choice. For a similar priced bike rack...
view full answer... - Concealed Style Class I Hitch Recommended for 2014 Toyota Prius VFor a 1-1/4 inch Class I hitch with a concealed crossbar like the Class III EcoHitch # 306-X7192 you'd looked at, I'd recommend the Draw-Tite # 24967. As you can see from the provided photo, the only portion of the hitch visible from the rear is the receiver tube and the safety chain loops. The remained of the hitch is concealed behind the rear bumper and fascia. When we installed the hitch on a 2016 Prius V, we found that when installed, the hitch pin hole in the receiver tube was recessed...
view full answer...
- Recommended Trailer Hitch, Cargo Carrier and Bike Rack for 2015 Toyota PriusFor your 2015 Toyota Prius I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24967. This hitch has a concealed cross tube so you will maintain a factory look with only the receiver opening showing under your vehicle. It has a maximum gross trailer weight of 2,000 lbs and tongue weight of 200 lbs. You will want to check your owner's manual to see what the towing capacity is as well. You will be limited by the lowest capacity, whether that is the...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video by:
Dustin K
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Written by:
Alexander C
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Andy C.
7/29/2021
Another thing is the 1 14 receiver limits the racks you can use with it. I wish it had a 2 receiver.