Comparing Trailer Hitches for 2017 Toyota Prius v

Question

Question:

Im looking to install a hitch for a bike rack on a 2017 Toyota Prius V, what is the difference between the Draw-Tite 24847 and 25967? From one readers comment it sounds like the newer model is more hidden under the bumper, is that true and are there any other differences? If its more hidden under the bumper does that also mean the tongue does not extend as far out from the bumper?

asked by: Ken S

0

Expert Reply:

The difference between the two hitches you were asking about for your 2017 Toyota Prius v are that the Draw-Tite # 24847 has a visible crosstube while the Draw-Tite # 24967 does not, as you can see in the accompanying photos. As for the distance from the end of the receiver to the edge of the bumper that can vary slightly though as you can see from the photos the difference between the two hitches will be minimal.

The other difference is that because the Draw-Tite # 24967 has a hidden crosstube, there is going to be trimming of the underbody fascia on your Prius, while the Draw-Tite # 24847 will not require that. I've added links to the installation instructions of both videos for you to take a look at.

Both of these hitches are Class I rated with a 1-1/4" receiver so you will need a bike rack compatible with those distinctions. I recommend taking a look at the Thule Doubletrack # TH92BJ which grasps your bikes by the top tube with cushioned ratcheting arms as well as by the rear wheels with ratcheting straps. This rack has an integrated lever which will easily allow you to fold it up when you are not carrying your bikes. The Doubletrack weighs just 32 lbs and comes with a pair of One Key System locks to secure the bikes to your rack.

I've added a link to each of our bike racks compatible with Class I hitches.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Yes, the Curt Trailer Hitch Receiver part #C11276 which is a fit for your 2015 Toyota Prius Plug-In Hybrid will work with the Bauer Revolution Swing-Away Bike Rack. You don't really need to worry about whether or not the Bauer Revolution…

view full answer...

Answer 2

First I recommend getting new hardware Kit #RHK. The mounting hardware does weaken due to being stretched during tightening. There does appear to be 2 different Draw-Tite Hitches for your Prius. The Draw-Tite Sportframe Trailer Hitch #24847…

view full answer...

Answer 3

The Draw-Tite Trailer Hitch #24847 is a good fit for your 2012 Toyota Prius and the receiver will not jut out past the fascia once installed. I have provided a graphic showing the end of the receiver in comparison to a Prius as well as a Prius V. I…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...