To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (56 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.Ordering from etrailer.com was fast and easy. Received my hitch receiver in a couple of days. Installation was easy and instructions were straight forward. Took about an hour but would have been faster if I didn't mess around with trying to put the factory tie down back in place. I then decided to leave it off as it's not needed anyway with the hitch receiver installed. Fascia trimming was easy, I used oscillating multi tool. I did not remove the rubber exhaust hanger, i just unbolted the mount and rotated it out the way. Its a sturdy quality receiver.
Receiver hitch was delivered very quickly. I’m very happy with my purchase.
The hitch fit my 2011 XC90 perfectly. Instruction say to remove and replace the rubber muffler mount, but you don't have to fully remove it, just take the bolts out and rotate the whole mount straight down to the ground on its rubber. Then put up the hitch, and rotate the mount back up and put the bolts in. It was EASY! Also cutting out the XC90's plastic valance was no problem. You just draw a rectangle with a Sharpie. I used a sawzall, but a hacksaw or even tinsnips could do a good job. Cutout is about 2 inches by 5 inches and it's below the car, the cut area is not visible at all. I included a pic.
The Curt hitch I bought from etrailer was a great price, shipped fast and I installed it in about 15 minutes. Great shopping experience.
I haven't been able to find a email related to the receiver hitch that I purchased from you and that is the item that I was considering writing the reviews for. When I received the box I didn't notice any damage but when I went to install it. It was bent and would not install.
Always great products, clear ordering, and timely delivery. I'm a returning customer for years.
my customers are very please with my choice to use e trailer for all their RV/trailer and accessory needs in the future.
Have not installed the receiver hitch. It does not work with my vehicle even though it says it is the correct hitch for a 2005 Volvo XC90. It hits the exhaust. I am not an amateur at installing hitches. I've bought from you before and not had any problems.
Laura E.
1/16/2017
Curt, I apologize for any inconvenience with your order. Occasionally, a installed hitch will make contact with a vehicles exhaust system. Thankfully, there are some remedies available for this issue by looking at this helpful link. I hope this helps!
Helpful Links
All parts arrived the next day. Everything fit per installation instructions. Wish everything I order online worked as well. Thanks again for carrying products made in USA.
Jim S.
2/15/2022
Great. Made in America made even better
Ordered the Curt hitch and T-tap wiring harness for the 2005 Volvo xc90. Everything shipped quickly and came packaged together. I appreciated the emails telling me when teh package shipped and tracking information. The hitch went in smoothly and without and problems. All hardware was included and the holes lined up perfectly. The wiring harness could not have been easier. simply unplug the existing light connections and snap the new harness inline. A cordless drill is a must to secure the ground screw, even though it is self tapping. The kit included everything I needed, including wire zip ties.
I would recommend etrailer.com to anyone looking for a hitch related product; good product and great online videos to walk you through an install.
This hitch was perfect on my 2013 Volvo XC90 - we loved it and used it a lot! The guys at our local gas station and service garage installed it easily. We just sold our car, and unfortunately the hitch would not fit on our new car - this was the hardest thing to give up!
Hitch fit as it should. Good price. Decent turn around after ordering.
Worked like a charm
The hitch was well constructed and a perfect fit. Less than an hour to install.
Hitch was easy to install and has worked flawlessly.
Installation was a bit of work but not too bad. Probably took 2hrs at most. It is a snug fit and you have to trim a bit of fascia out of the way. I am happy with the look and function of the receiver. Overall very satisfied.
I installed on a 2004 volvo xc90. I watched install video went exactly as shown. Only hiccup was I had a bumper support that I had to trim/grind 1/8 of inch or so. Also if you are laying underneath car best having 2 people. I managed with a jack but wasn't easy.
Installation of the hitch took 45 minutes in my driveway with hand tools and a jack, fit exactly as it should and the instructions offered ample detail.
The muffler on my particular model ended up sitting directly against the hitch but I don't foresee any issues and it could be easily remedied by a muffler shop for a few bucks.
2004 XC90 T6
The product was of great value and construction. Instructions were simple and installation was easy. On the 2007 XC 90 we had to pop the rivets that hold a plastic piece of the bumper to keep it from virbrating. We did that, used zip ties with the same holes and wrapped around the bumper. I drove 600 miles and no noise. Excellent product.
Thank you for the follow up. I love the trailer hitch exactly what I needed and it looks great.
I bought this hitch for use with a bike rack on my Volvo XC90. It was very easy to install and works great. The online video instructions from eTrailer were very helpful.
etrailer made it a simple process for a good price. They didn't have the hitch I ordered in stock and with a simple phone call the replacement hitch was on it's way with no issues.
Perfect fitting product and relatively easy and I am very experienced. There is a little bit of trimming of the bumper cover to make it fit exactly right, but this can be done with a hack saw.
Super easy and straight forward. Had the hitch installed in 20 minutes. No fuss. You will need a helping hand. A bit much for someone alone. We are always happy with Curt products. And like always, eTrailer is AWESOME!
I purchased two hitches from etrailer. Both fit the car perfect. The videos on how to install were great.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
2/7/2023
Well it sounds to me like you have experienced a flexed hitch. This is very common when shipping hitches. We recommend using some sort of vise to bend the wings back into place. I have a link below for more information and your reference.
Helpful Links
faq-my-trailer-hitch-doesnt-fit.aspx