T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(93 reviews)
Price: $42.47
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118569
Retail:$74.63
Our Price: $42.47
You Save: 43%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (93)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118569
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point in rear cargo area
- Plug in connector
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side interior trim panel in your rear cargo area. Once you've plugged in the tow harness, locate the fuse box under your vehicle's hood and insert the provided 20-amp fuse as indicated in the instructions.
Once installation is complete, the 4-way flat connector will be stowed in an out of the way location in your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118569 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
This Product Fits The Following Vehicles
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Product did not meet expectations
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118569
Average Customer Rating: 4.9 out of 5 stars (93 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Osvaldo 04/22/2024
Love the product. I did have to buy a tap to make the thread for the car because it was oxidize. Just bought the M12 1.25 as the thread if the bolt and it worked. Unused a jack to assist me in picking up the draw type hitch.
The wiring harnesss was a breeze to install. Excellent product. Recommend
by: Keith G.06/27/2013
2014 Acura RDX
2014 RDX w/Tech
I was a bit intimidated when I open this product up. I read the instructions and went for it.
The pre-wired trailer wiring plug was the only thing I had problems finding. The picture provided in the instructions didn't exactly match what I was seeing on my car.
Turns out it was just hidden, through the access hole look or feel forward towards the front of the car. (picture attached) The actual plugging is done by feel, one can't see it and plug it at the same time.
After that, all is good...
Keith G.
12/26/2014
After a year, no issues with the wiring kit what-so-ever.Works perfectly.
by: Paul 07/05/2023
Straightforward instructions with easy installation. as for the hitch, I used the empty shipping box to hold the hitch in place, while I inserted the bolts by myself!
by: Richard05/21/2022
Excellent product overall. Flat 4 wire to the connector needs to be at least 6” longer to facilitate installation when routing through the tire well grommet to the hitch. Everything had to be positioned too critically to get it to reach the hitch. It worked but not easily as it should.
by: Mike 10/07/2023
2017 Acura RDX
Right from picking up the box (great design) at the front door I knew this was going to be a well thought out product. The meticulous and well placed videos on install are first rate and made fitment a breeze.
by: Robert C.05/23/2013
2013 Acura RDX
The product arrived by UPS very quickly. The packaging was damaged however the product inside had been packed well enough that it was not damaged. Two items were ordered; a Draw-Tite trailer hitch and a T-One wiring harness. The online video was very helpful in describing the installation process for the hitch. I was able to install the hitch by myself in less than a hour. The wiring harness was a little more difficult since Acura doesn't provide much space in which to work and the factory trailer wiring connector is on a very short line. It was also difficult to get the trailer lead routed under the deck panels and into the spare wheel well. But I succeeded. Overall I am very pleased with the results.
Robert C.
5/23/2014
After a year of use I am still pleased with the installation. The harness tucks safely under the rear storage cover in the RDX. No issues have occurred with use. This is a great product.
by: Anthony11/07/2023
2017 Acura RDX
Installed it myself, with the help of a jack, in under an hour!
by: Terry 04/24/2023
Everything worked as expected. Had to tap out the receiver nuts on the frame, but I expected that given that the vehicle has 75,000 miles.
by: Joe Z.07/25/2014
2014 Acura RDX
Got the product promptly and installed hitch and harness in 30 minutes! For the harness - Just pull the speaker panel behind the left rear seat (driver's side) and the harness was right there. Plug harness in, feed the plug under the spare tire liner, attached ground to taillight assembly (10mm bolt) and stick module to wheel well using two sided type. Done!
Roman
12/3/2014
Thank you,The 10mm bolt way to go.Have a safe
by: AWB05/05/2018
Acura RDX
Again, a few paint chips but not a big deal. Quickly fixed with some fast drying paint. Installation was reasonably easy, but the space under the Acura RDX when working on the ground is not generous. Post-2012 Acura RDX need to have metal blocks (included) fitted between the chassis and hitch plates due the shaping of the chassis. Getting the holes aligned and bolts engaged while holding up the hitch was the trickiest part. Wiring per the video was simple but it would be helpful to have a video showing how the wiring can be permanently routed out to be mounted on the hitch (as is available for a Hyundai Tucson).
Heather A.
5/7/2018
AWB, thank you for your review. If you would like to route the 4 way wiring underneath the vehicle then you will have to find a grommet hole in the cargo area of the vehicle. If you do not have a grommet hole large enough you will need to drill your own hole using a hole saw, please check the underside of the vehicle is clear of obstructions. Once you route the wire through the hole you want to make sure you use some type of grommet or sealant such as part # 0160297 to keep out moisture and fumes. I see you have the Draw-Tite hitch part # 75784. This hitch already has a mounting point for a bracket. You will need a 4-way bracket part # 18144 to attach to the existing bracket on your hitch.
Helpful Links
by: James05/07/2016
Installation was simple and exactly as per instructions. Feeding the hitch wire under the foam pad in the tire well was a bit challenging but doable.
James
1/30/2018
I only use the hitch very occasionally but both products are working well with absolutely no problems.
by: Brian Thorpe09/20/2020
2014 Acura RDX
This was my second purchase of a wiring kit for my RDX. The first was a Wxxxxx product that provided instructions NOT for my car. I found other product instructions on line for my car that made sense. Therefore I knew the W. product was wrong and I had to send it back. The T-One product plugged in exactly as instructed. Installation was actually easier that instructed. My only problem was that the right side lights of my trailer initially did not work. They did work with my other vehicle (2003 Buick Rendezvous). After checking the plug output, there was power at P(parking) , L & R signals. I attached a ground, the ran a jumper from P to P ... worked. Did same for L, then R. Each individually, and they all worked. So this told me that the power requirements were too much for all three at once. I cleaned up the ground connection at the non-functioning light (R) and confirmed it was good, plugged the connectors together, and it all worked as it should. Perfect! The reason it worked on the Buick is probably because the wiring is directly from the light wiring. The T-One isolates the trailer from the rest of the harness, thereby protecting the electrical systems. That sounds good to me.
by: Alan05/31/2022
Acura RDX
I worked perfectly for our RDX, with very little trouble when I installed it. Length of wiring harness was great and all things hooked up just right. Worked the first time with all trailer lights working.
by: Mike D08/12/2017
2017 Acura RDX
Easy install took all of about 10 minutes to install the wire harness.
Mike D.
8/15/2018
Thank you George One year has passed already? Wow! Everything is still working great. I have hauled my Harley up and down California with ease and the system functions perfectly. I was going to rent a hitch and a trailer from U-Haul the first time a year ago but when I saw the price of $179 one way, I decided on buying and installing your tow package for a total of around $140. Best deal I could have made. trailer was $12 per day so still came in under their one way deal. Everything since has been a bonus. Can beat it!!
by: David10/25/2021
Can the wiring harness be fed to the outside under he car to the hitch? Currently it is in the spare tire comparment area & I would have to close the hatch on the wire to connect to the outside trailer. That could cause a wiring failure. The wiring currently works great as is.
by: Chris H08/21/2016
2017 Acura RDX
Perfect fit on my 2017 Acura RDX and the installation only took about 15 minutes. When you remove the rear access cover inside the car the connector you attach the new harness to was not immediately visible so I needed flashlight to locate it. The 4-pin connector that attaches to you trailer lighting is stored where the spare tire goes and has plenty of length to make it to you hitch. Great product!
by: Steven 05/22/2020
2013 Acura RDX
Purchased this product and the Curt Class III , 2” inch receiver hitch for a 2013 Acura RDX. Absolutely a perfect plug and play installation that took all of 10 minutes. The online video of this installation is better than the provided instructions. Extremely fast shipping! Received it in two days. Etrailer.com always seems to have exactly what I need and ships it very quickly. Pleasure doing business with them. Customer service is outstanding!
by: Larry Jarvis07/09/2014
2014 Acura RDX
Install was easier than expected. Inserting the trailer plug was easiest when following the factory cable from the spare tire area back to the wheel well and pushing the trailer plug into the spare tire area. No need to remove any of the foam sound deadening material.
by: Tom W.10/08/2016
2017 Acura RDX
I received this wiring harness very quickly from etrailer and had it installed in 20 minutes. Very pleased with this as well as the hitch I received prior to getting the wiring harness. Good instructions.
by: Iain B07/22/2016
2015 Acura RDX
The kit showed up quickly, had all the right parts, was simple to install and works perfectly. What more could you ask for? The 2015 Acura RDX wiring pigtail is short and difficult to find and reach through the access cover so the panel around the access cover also had to be pulled away from the body along with removing the left side black foam spare tire surround piece. It all went back together easily and works great.
by: Larry D.06/18/2016
2016 Acura RDX
This wiring harness is complete and plugs in to the Acura RDX wiring harness for trailer wiring perfectly. The instructions are clear and thorough and installation was quick and easy.
by: Mike G.09/21/2017
This is the second I have ordered a trailer hitch for my car at etrailer. The hitch from drawtite fits the car very neatly and appears to be well made. Installation was simple with instructions provided. The hitch on our new car will allow me to use my utility trailer once again.
by: Bruce04/18/2022
Acura RDX
Easy to install, both the wiring and hitch kits included everything needed for installation on my Acura RDX.
by: Mike woods10/24/2016
2015 Acura RDX
Ordered metal clip holder along with 4way flat wiring harness. Back order on metal clip until sometime in Nov. Wanted clip but did not want to wait for wiring harness and I did not want to pay shipping on metal clip so I cancelled order on clip.
by: Thomas07/22/2017
At first I could not find the blue harness connector behind the paneling so I read a few reviews that also had the same problem. I found it tucked away and quickly secured it and the rest of the wiring. I want to run it through the body under the frame so it doesn't stick out my trunk. Will try that later. Everything went as instruction noted. The only concern is the length of the wiring that attaches to the trailer. Good job!
25
93
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Does Curt Trailer Hitch Receiver Fit 2017 Acura RDXYes it does! The Curt Trailer Hitch Receiver # C13130 will absolutely fit your 2017 Acura RDX. In fact, the accompanying photos show this hitch on a '17 RDX. This is a simple, bolt-on installation that doesn't require any drilling or fascia/bumper cutting of any kind; all you have to do is lift the hitch into place and bolt it on. I have added a link to a video install on a 2017 Acura RDX for you to check out as well of the Curt Trailer Hitch Receiver # C13130. If you are looking to...
view full answer...
- Recommended 2 Inch Hitch for 2013 Acura RDXYes. I recommend using the Curt # C13130 because of the durability of the powder coating on their hitches. This has a 2" receiver that provides you with a better variety of hitch mounted accessories and is much better suited for towing if the need arises. If you're going to be towing, I've listed the appropriate wiring harness and other parts you'll need to complete your towing setup below. Wiring: # 118569 (Tekonsha has the most reliable converter boxes) Ball Mount/Hitch Ball: # 989900...
view full answer... - Curt or T-One Trailer Wiring Harness Recommendation for 2014 Acura RDXThey both will actually install the exact same. They both use the same trailer wiring connector that's at the rear of your vehicle behind the interior trim panel. I would recommend going with the T-One kit part # 118569 over the Curt part # 56008 though since we have better luck with the T-One brand over the Curt brand in terms of long term reliability.
view full answer... - How Is 4-Pole Connector Routed to Hitch Once Installed on 2013 Acura RDXTo use the trailer connector, you would simply pull the connector from the spare tire well and plug in your trailer. You then close the liftgate on the wire. The rubber weatherstripping on the rear door is plenty thick enough that closing the door on the wiring will not damage it in any way as long as you keep the wiring away from the latch, which WILL damage it. This seems like a very strange way of routing the cable, but keeping the connector stowed in the spare tire well when it is...
view full answer... - Factory Connection Point for Trailer Wiring Harness 118500 on a 2011 Acura RDXFirst, for a 2011 Acura RDX, you would need to use trailer wiring harness # 118500. The connection point is already present on the vehicle. It is behind a trim panel in the cargo area of your RDX. The small fuse will also need to be installed in a fuse panel. I have included a link to the installation instructions for you to view.
view full answer... - Trailer Wiring Recommendation for 2016 Acura RDX 2015 Toyota Highlander 2013 Ford EdgeFor your 2015 Toyota Highlander the best trailer wiring harness is the Tekonsha part # 118449 as it installs the easiest and has the most reliable converter box. For the 2016 Acura RDX you'd then want the part # 118569 and the 2013 Ford Edge # 118515. For the Ford Edge the etrailer hitch part # e98870 is the way to go. It has great towing capacities and also has a mostly hidden appearance as well.
view full answer... - Should 5-Way be Able to Plug Into Vehicle 4-Way and Still FunctionIf you plug a 5-way into a 4-way all of the trailer lights should still function like normal with only the 5th circuit not being active. You'll probably need the fifth circuit active so you can back the trailer up without the brakes locking up and for that you'd want the # 20036. For more info on troubleshooting the 4-way check out the help article I attached for troubleshooting tips.
view full answer... - Trailer Wiring Harness for a 2015 Acura RDX and Where to Stow the 4-Way Trailer ConnectorTrailer wiring harness # 118569 is the correct one for your 2015 Acura RDX. The wiring is designed so that the 4-Way end gets ran out of the hatch when used. The hatch can be closed on the wires as long as you keep it away from the latching mechanism. The vehicle weather stripping will protect it. If you want to run it permanently on the outside of the vehicle then you will need to remove as much of the flooring and panels as you can in the cargo area. Look for a grommet that you can run...
view full answer... - Distance From Ground To Inside Top of Receiver on etrailer Trailer Hitch Receiver For 2017 Acura RDXThe distance from the ground to the inside top of the receiver for the etrailer Trailer Hitch Receiver # e24AR is 12-1/2". I have attached an image below showing this measurement on the Curt # C13130. The etrailer hitch is identical with the exception of the matte black powder coat finish. Since it sounds like you plan on towing, you will also want wiring. For the most reliable option I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118569. This plugs into...
view full answer...
- Recommended Trailer Hitch for 2018 Acura RDXFor your 2018 Acura RDX I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75784. This Class III hitch is confirmed to fit your vehicle and will use existing holes in its frame for a no-drill installation. It features a powder coated steel construction and its 4,000 pound towing weight capacity makes it the highest rated hitch available for your vehicle. Since it doesn't require the use of an additional stabilizing strap with non-trailer loads like the Curt alternative, this particular...
view full answer... - Installation of Trailer Wiring Harness for 2013 Acura RDXFor your 2013 Acura RDX, the wire harness for a trailer connection needed is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118569. There is a fuse required that comes with this kit that needs to be installed in the fuse box under your hood. There will be a fuse position labed (20A ) Trailer. If this does not activate your trailer wiring, then there is a relay that will need to be obtained from your Acura dealer. Most vehicles already have the needed relay and...
view full answer... - Recommended Trailer Wiring Harness for 2017 Acura RDXThe three available wiring harnesses for your 2017 Acura RDX are designed specifically for your vehicle and will all install using the same existing ports located behind the driver side trim panel. These are nice, plug-in harnesses that will install quickly to provide your vehicle with a 4-Way connector to power the trailer's signal lights. I recommend going with the Tekonsha T-One Vehicle Wiring Harness # 118569. Tekonsha specializes in wiring/electrical products like this one and they...
view full answer... - No Power on Trailer Wiring Harness Green Wire on a 2015 Acura RDXTo properly test a converter box, you will first need to test the wires going into the converter box from the vehicle using a circuit tester such as # PTW2993. If there is no power on the green input wire, then the issue is with the vehicle. Your 2015 Acura RDX may require an additional fuse or relay to make everything fully functional. It looks like under the hood there is a fuse in location 26 that the owner's manual just calls trailer. If there is power on the input wires when there...
view full answer... - Could Rola # 59109 Block Vehicle Brake LightsThe overall width of the Rola part # 59109 is 53 inches. You'd have to measure the distance between your rear brake lights to know if this would block that. With the third brake light above on the hatch of your vehicle you'd be very safe. Additionally, the Rola # 59109 has taillights built in for when you get the trailer wiring installed on your 2014 Acura RDX like the 4-way part # 118569 which I attached an install video for.
view full answer... - Trailer Wiring Solution for 2018 Acura RDX To Use as Way to Power Ski Bag WarmerThe max amperage draw of the T-One Vehicle Wiring Harness # 118569 that you referenced is 7.5 amps so if your ski bag warmer draws 7.5 amps you'd be pretty close to shorting it out. Your best option would be to install this kit and then also install the # ETBC7L and use the power circuit of the adapter which would be rated for 40 amps and would easily work well. If the warmer normally powers from a cigarette lighter style of connector you could use the # HM47675 to easily make the connection...
view full answer... - My Tail Lights are not Working on my Trailer I'm using the Curt Harness on my 2014 Acura RDXYou've done a great job troubleshooting. Start by checking the connector from the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118569 or the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 56008 that controls the running light signal. This will be the brown as you said earlier. Un plug it and check the pins inside it may be that one of them bent the wrong direction and is not giving the appropriate signal to the converter...
view full answer... - Trailer Hitch Recommendations for 2016 Acura RDXBecause the support strap you speak of would loop over the spoiler, there is a possibility that the weight applied to the strap could break the spoiler. Curt makes a great hitch, but I can't recommend them for every application because some vehicles aren't suited to using the strap (especially vehicles like your RDX that have the spoiler atop the hatch lid). I'd recommend the Draw-Tite Class III hitch, part # 75784. Unlike the Curt hitch, Draw-Tite doesn't have a warranty stipulation...
view full answer... - 2015 Acura RDX Wiring Harness InstallationThe T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118569 is the correct fit for your 2015 Acura RDX. It comes with a 20 amp fuse that does need to be added to the fuse box under your vehicle's hood. I've attached a video and the installation details to assist.
view full answer... - Is Fuse Installation Required for Both Tow Ready Harnesses # 118500 and # 118569 in Acura RDXYes, both of the Tow Ready trailer wiring harnesses you referenced, parts # 118500 and # 118569, require you to install the supplied fuse in the vehicle's fuse box located in the engine compartment. Please note that these two harnesses are a fit for different model year ranges of the Acura RDX. The # 118569 fits 2013 and 2014 model years while the # 118500 fits 2007 through 2012 vehicles. I have linked an installation video for your reference.
view full answer... - Recommended Wiring Harness and Installation Instructions for 2013 Acura RDXThe Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118569 as well as the other custom wiring harnesses we carry will all install in a similar manner. This custom-fit T-One connector plugs into your Acura RDX's wiring harness, which is located behind the driver's-side interior trim panel in your rear cargo area. Once you've plugged in the tow harness, locate the fuse box under your Acura RDX's hood and insert the provided 20-amp fuse as indicated in the instructions. The...
view full answer... - Trailer Hitch and Wiring for a 2016 Acura RDXWe do have trailer hitches and wiring that will fit your 2016 Acura RDX. For a trailer hitch I recommend a Class III hitch because they are more robust and have a 2 inch receiver that is compatible with more accessories. Curt Class III hitch # C13130 is a popular option for the RDX. I included a link to a video showing an example installation for you. For trailer wiring you can use wiring harness # 118569 to add a 4-Way flat connector to the back of the vehicle. If you plan on doing...
view full answer... - Trailer Hitch and Wiring for a 2015 Acura RDXNo, the 2004 Acura MDX and 2015 Acura RDX require different trailer hitches. For the 2015 Acura RDX you can use Draw-tite trailer hitch # 75784. I have included a link to a video showing installation of this hitch for you. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and storage bag. If the ball mount kit does not have the right rise or drop...
view full answer... - Where is Fuse for Trailer Wiring Harness Used on 2008 Acura RDX InstalledThe Tekonsha # 118569 trailer wiring harness you'd looked at isn't a fit for a 2008 Acura RDX, it fits the 2013-2018 model. For your 2008, you'd use either the Curt # 56008 or the Tekonsha # 118500. The 10A fuse included with the Tekonsha # 118500 or the Curt # 56008 installs in the inline fuse holder of the connector that plugs into the vehicle. The additional fuse included with the Tekonsha # 118500 isn't needed for the RDX installation, it's used if you're installing the harness on...
view full answer... - Trailer Hitch Recommendation for 2013 Acura RDX Towing 1750 LB Fishing BoatI have included a link to the hitch options that we offer for your 2013 Acura RDX. The hitch that I recommend for your 2013 Acura RDX is the Curt Class III Trailer Hitch Receiver, # C13130. This is a custom fit hitch so there is no drilling or welding required for installation and it has a towing capacity of 4,000 lbs and tongue weight capacity of 600 lbs. Although the hitch has a 4,000 lb capacity, I did some checking and it looks as though your RDX has a maximum towing capacity of 1,500...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Joshua S
Video by:
Dustin K
Video by:
Jonathan Y
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Ryan G
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Doug
8/18/2013
Thanks to Keiths comments, it was easy to find. I went back in with a flashlight and reached around and it. Again, thanks to Keith!!!