Filter Products
Filter Results
$62.19 - $103.59
$222.75 - $384.55
Filter by Axle Compatibility
$62.19 - $103.59
$222.75 - $384.55
Videos
for Trailer Fenders
Help Articles
for Trailer Fenders
Expert Answers
for Trailer Fenders
I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern -…
view full answer...The backing plate on the Tandem Axle Teardrop Fenders #HP92VR is 12" down from the top of the fender.
view full answer...Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part #HP29VR you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part #CE26098G-2. If you do not…
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…
view full answer...Yes Matt, it looks like what you're looking for is the Tandem Axle Trailer Fender #HP88VR. These fenders are a bit longer than #HP34VR measuring 68" long, (so 3" longer), will also work…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…
view full answer...I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey #CE19502-2 and the larger 13" Black #CE19503-2. Both options represent the only color available from CE Smith in…
view full answer...We have a very close option with the #CE19503-2 which is off by only 1/4 of an inch to the measurements you listed. It measures 29-3/4 inch for the inside portion and 33-3/4 inch for the outside portion.
view full answer...It sounds like you are looking for the EZ-LOADER Gray Plastic Fender for 13" Tires, w/Cutout part 5291132 and 5291131. These are made for 13" tires and have a marker light cutout. The closest thing I have is the CE…
view full answer...Great question. As a general rule, when your trailer is loaded to it's full capacity, there should be a minimum clearance of 3 inches between the top of your tire and the underside of your fender.This should give you adequate…
view full answer...For the 13" #CE19503-2 there is a distance between the two outside mounting on center of 33-3/4 inches and 29-3/4 inches between the two inside holes. The holes on the mounting surfaces are spaced apart 5 inches vertically and 2…
view full answer...