CE Smith Mounting Brackets for Trailer Fenders Installation Video

Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part #HP29VR you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part #CE26098G-2. If you do not…

The dimensions you have are nearly identical to the CE Smith #CE19504-2 you looked at. However, these are designed for 14" wheels. For 15" wheels you would need the Fulton #F008585-2. These are slightly longer and taller at…

We carry several trailer fender bracket options you could use to install the Fenders #CE19502-2 which I attached a link to on this page. The most popular option is the larger L-bracket part #CE26061G-2. I attached an install video for these for you…

Trailer hubs that a 8 inch wheel can also fit a 12 wheel so yes you could upgrade to the larger wheel size. So you could use a 5.30-12 tire and wheel like the part #AM30780. The pilot diameter would be large enough to fit over the hub pilot. Since…

For the width you have between your trailer frame and the outer edge of your tire the fender part #CE19500-2 you mentioned would work great. Then for fender brackets the part #CE26065PGA would be all you'd need and you'd be set.

The CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2, part #CE19502-2, will mount to the existing hardware on your trailer. There will be some drilling involved because the fenders do not have…

The CE Smith Single Axle Trailer Fender #CE19502 is the one fender that we have that will fit the brackets that you have. This fender is only available in the gray color. The color is molded into the plastic so if you so choose you can replace both…

The brackets you will need for your CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2 #CE19502-2 will be the CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3"…

The CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Black Plastic - 14" Wheels - Qty 1 #CE19504 can be installed with a u-bolt around your trailer frame instead of drilling into the frame using CE Smith U-Bolt - Galvanized -…

The Fulton Plastic Fender with Top Step, part #F008551, is designed to be mounted with your existing hardware, or mounted with brackets designed that are specific to the trailer frame on which they would be installed. No mounting hardware is…

You can go larger in tire in some instances, but it's going to depend on how much larger you want to go. You don't want to see any less than 3 inches of clearance between the top of the tire and the underside of the fender. A…

The best option we'd have to replace the fenders on your trailer would be the Fulton Single Axle Trailer Fenders with Top and Side Steps part #F008584-2. The measurements we have for this fender appear to be very similar to that of the…