Review of etrailer Trailer Fenders - Tandem Axle Fenders With Backing Plates - HP92VR Video

There is a flange on the Tandem Axle Trailer Fenders w/ Backing Plates #HP82VR that overlaps the backing plate that you'll use for the welding surface. When it comes to welding, we always recommend having this done by an experienced welder.

The Tandem Axle Teardrop Fenders w/ Backing Plates #HP92VR are made of 16-gauge steel.

The Tandem Axle Teardrop Trailer Fender #HP94VR you were looking at is 9" wide the whole length of the fender, and at it's largest is 15" deep/tall.

When replacing your fenders you want to do your best to match the dimensions to what you currently have. Typically you won't find an exact match to the current fenders. Based on my research it looks like you have a tandem axle trailer with…

I would need to know the axle capacities to be sure but I can venture an educated guess. The only tandem axle double-eye leaf spring hanger kit we have that includes 8 inch equalizers is #APT1. With this kit, the center of the forward hanger to the…

Good news, I can help you find a tire for your Sundown Horse Trailer. The 205/90-15 is a close tire size to the 7.00-15. The closest size to a 7.00x15 tire that we offer would be a 225/75-15. One 225/75-15 tire that could work for you is the Kenda…

We recommend having about 4" of clearance height-wise to account for suspension movement and at least 2" width-wise between your tire and trailer fender or trailer frame like part #HP66VR that was referenced. Since you are building a…

The Backing Plate #HP72FR can be used with the Tandem Axle Teardrop Trailer Fenders #HP94VR. These backing plates are 69" by 12" and manufactured from 18 gauge steel. It can be cut if you are wanting to match the profile of the fenders.

I do have an option for you, but there is not an A-Frame trailer jack offered with a 1-7/8" or smaller outer tube diameter as 2-1/4" is the standard. What you will need to do is replace your bottom support plate with the #JSP-100 instead as…

The mounting bolt pattern of the Buyers Products A-Frame Jack #3370091265 is 3" all the way around. The mounting holes are elongated though so if you have a slightly larger/smaller distance it should still work out.

I have attached a photo for you below that shows which way the s-hooks should face when attached to the safety chain loops on a trailer hitch. The photo example is using the Curt Single Hook, Coiled Safety Cables with S-Hooks part #C80176 for…

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…