Review of etrailer Trailer Fenders - Tandem Axle - HP64VR Video

I attached a picture that shows the proper position of shackles and equalizers on trailer suspension. Sometimes the shackle will flip up but if you jack up the trailer by the axle that's got the shackle flipped you can usually get it to flip back…

The smaller section of the Z-Rail for Enclosed Trailer #362417-955 is approximately 3/4" tall, while the larger section is approximately 1-1/4" tall.

Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure the…

A brake axle would have brakes, either electric or hydraulic drum or disc brakes while an idler hub would have no brakes. Many times, a tandem axle trailer will have one braking axle and one idler axle. The 3500 lb capacity #35545I-EZ-89 axle you…

I spoke to TRC and they said the inside channel of the H-Channel for Enclosed Trailer part # 36281-955 is 1.027" wide.

A 5/8" diameter hitch pin is usually made of steel, though some have coatings applied to help resist corrosion. For example, the Master Lock Pivot Lock Hitch Pin for 2" Hitches #ML1465DAT is made of stainless steel, but there is also a…

Typically, brackets like #CE26098G-2 would be used for a stronger installation but it's certainly not unheard of to mount the #CE17900G fenders by bolting the side directly to the trailer.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

The Tandem Axle Teardrop Trailer Fenders item #HP64VR can be installed using your ubolts you would just have to drill holes into the fenders. They are designed to be installed in different ways depending on the situation. You don't have to use…

The hub covers that I have are only available in chrome ABS finish. The Quick Trim Chrome Finish Trailer Hub Cover 6 on 5-1/2, part #QT655C, is a cover that will fit a 6 on 5-1/2 inch bolt pattern wheel. The Quick Trim Chrome Finish Trailer Hub Cover…

I wish we had a lug nut cover that fit the size you have, but nothing we offer is the correct size. The best option we have would be a larger hub cover like the #QT655C which would cover the center portion of the wheel. I attached a review video and…

Erickson E-Track Cargo Control items like #EM59150, #E19148 and #E19146 are not painted but rather they are given a zinc coating treatment to provide corrosion resistance since they are made of steel. These are perfectly suitable for use on the deck…