Filter Products
Filter by Axle Compatibility
$28.73 - $52.76
Videos
for Trailer Fenders
Help Articles
for Trailer Fenders
Expert Answers
for Trailer Fenders
I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires…
view full answer...The backing plate on the Tandem Axle Teardrop Fenders #HP92VR is 12" down from the top of the fender.
view full answer...Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part #HP29VR you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part #CE26098G-2. If you do not…
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…
view full answer...Yes Matt, it looks like what you're looking for is the Tandem Axle Trailer Fender #HP88VR. These fenders are a…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…
view full answer...I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey #CE19502-2…
view full answer...We have a very close option with the #CE19503-2 which is off by only 1/4 of an inch to the measurements you listed. It measures 29-3/4 inch for the inside portion and 33-3/4 inch for the outside portion.
view full answer...It sounds like you are looking for the EZ-LOADER Gray Plastic Fender for 13" Tires, w/Cutout part 5291132 and…
view full answer...Great question. As a general rule, when your trailer is loaded to it's full capacity, there should be a minimum…
view full answer...For the 13" #CE19503-2 there is a distance between the two outside mounting on center of 33-3/4 inches and 29-3/4…
view full answer...