1987 Suzuki Samurai Catalytic Converters

Since you already have a factory 4-way flat on your 1996 Ford F-350 you will need the Adapter 4-Pole to 7-Pole #37185. This will plug into your factory 4-way and the rest of the wiring will have to be spliced into your factory wiring as I do not…

On your 1999 Ford F-350 dually it sounds like you are looking for the best option for a smoother ride and that you already have the Firestone Ride-Rite Air Helper Springs #F2550. If so, do you have the Firestone Ride-Rite LS Rear Shock Absorbers…

The correct bearing kit for your Dexter 3,500 lb axle with Nev-R-Adjust brakes for your Airstream is the following: - Hub Bearing Kit #BK2-100 As for premium kits, I'm not quite sure what you are referencing, but the bearings we offer will…

The Putco Universal-Fit Mud Flaps - Polished Stainless Steel #P79611GM are actually designed so that you can install them on either the front OR the back of your 2014 Chevy Silverado 1500. So for a set of four you just need to order a pair and…

According to Hydrastar, the #HBA-CAM is designed to help electric over hydraulic brake actuators communicate correctly with OEM brake controllers, however they couldn't say if their adapter works with actuators from other manufacturers. As a…

The K08-219-96 hub is the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2 #8-219-4UC3-EZ. You can alternatively use the Trailer Hub and Drum Assembly, 5.2K - 7K E-Z Lube Axles - 12" Diameter -…

Repair kit #LG-146059 contains 2 pins and the drive shaft all of which are for the top of the jack. To help I have included the written instructions below and also a diagram that points out the parts mentioned in the written instructions. The…

I'm happy to assist. Attached you will find photos of the Tekonsha OEM Replacement Vehicle Wiring Harness #TK22113. These will correspond with the installation details I've also attached for your 2016 Dodge Durango.

The clearance that you will want between your truck frame and the rear axle for the Timbren Rear Suspension Enhancement System, #TDR3500CA, is either approximately 6-3/4 inches or approximately 7-3/4 inches (see photo). Once the Timbren springs are…

You are correct, the Firestone Ride-Rite Kit, #F2478, will fit your truck, but not if it has an in-bed hitch. The only reason for this is because the upper brackets for this kit mount on the outside wall of your vehicle frame, just above your axles…

For your 2019 Ram 3500 Dually Diesel I recommend the Timbren Rear Suspension Enhancement System #TDR3500CA. This jounce spring system is rated for up to 8,600 lbs and will progressively support your load by getting more rigid as more weight is added.…

Yes, you can replace your Dometic rooftop AC unit (condenser unit) with a Furrion one and still be able to use your existing thermostat and wiring. You just may need an adapter #ACCOLKIT to go from the wiring harness on the Furrion unit to the…