Catalytic Converter Comparison/Recommendation for a 2003 Toyota Corolla

Question

Question:

Hi, I have a 03 Corolla and am looking for a direct fit catalytic converter. I came across the MF93200 and the MF49461 on your site. They seem to be very similar but must have some difference. Could you tell me the difference between these two? Thanks

asked by: Eric

0

Expert Reply:

Both part numbers you referenced are confirmed catalytic converters for your 2003 Toyota Corolla. The difference is that the part # MF49461 is a higher grade converter. It is part of the OEM Grade line of converters from Magnaflow. OEM Grade converters are specially formulated with a heavier wash coat and loaded with twice the amount of precious metals (platinum, palladium, rhodium) to provide a much stronger coverage.

OEM Grade is recommended for vehicles that have:

• High Mileage
• History of Check Engine Lights
• Gross Polluters
• California Emissions Equipment Outside of California

expert reply by: Jameson C

0

Answer 1

We have several 49 state legal converters (not legal in California) for the 2002 Lexus ES 300. They can be split into direct fit and universal fit. For a direct fit rear, you can use #MF26214 or the OEM #MF49992. For a direct fit rear manifold OEM…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Lester, so the Curt Front Hitch #C31076 will be a fit for the 2022 Toyota 4RunnerTRD Off Road Premium. I can't speak on what Amazon says, but I doubt their product information is written by folks who actually know the products. I went ahead…

view full answer...

Answer 6

We do have a front mounted receiver option that would work for your truck, but the Draw-Tite #65078 isn't a good fit for the Denali trim. The Denali front clip is different than the other trim levels, and in order to install the hitch major…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

view full answer...

Answer 9

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 10

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Catalytic Converter Comparison/Recommendation for a 2003 Toyota Corolla

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching