In-stock alternatives that are ready to ship
5-7/8" x 4-5/8" Rectangle. LED utility light with 8 diodes produces a bright white light. Flood beam illuminates a wide area. Great White series features ultra bright white diodes. Impact-resistant polycarbonate lens. Pedestal mount.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at this Great White flood beam LED work light with 2,000 lumens. Now this is a rectangular LED work light, provides a bright white light for industrial, agricultural, and recreational applications. The Great White series features nice custom-cut optics and an ultra bright white diodes for increased light output. It is a flood beam design, so it does illuminate a wide area and the LEDs will make great replacements for incandescent lights because they'll last 50 times longer.
They're more efficient because they'll provide brighter light with less power output, and of course no bulbs to replace, no brittle filaments to break. This is all in a nice, durable aluminum housing, has a heat sink design to help dissipate the heat, and then it has an impact-resistant polycarbonate lens on the front. Now this light is compatible with 12-volt DC and 24-volt DC systems.You can see we have it mounted on the pedestal. It's a pedestal mount design. Comes with the included bracket and the stainless steel hardware to install.
Now it is an adjustable bracket so once it's installed you can adjust the angle of the light as needed. You can see it does offer the hardwired leads which are durable and resist corrosion, does have reverse voltage protection, and the whole wire you can see has a two-conductor PVC jacketed harness, uses 18-gauge wire. The light output on this is 2,000 lumens. As we mentioned, it's eight LEDs. The power draw at 12 volts is 2.89 amps, 24 volts is 1.27 amps.
Operating voltage is 10 volts to 32 volts DC, and then I want to give you some dimensions and then we're going to plug this into some 12-volt power just to show you how bright the light is.So dimension width wise, it's going to be right at 5 7/8 inches wide. The height, I'm going to give you two different height measurements. We're going to measure just the light, so the measurement height of just the light by itself without the bracket is 3 5/8 inches. If we put this straight up with the bracket, the height is going to come out to about 4 9/16 inches, and then the depth from the front to the back of the housing is right at about 1 11/16 inches.So again, what I'm going to do is we'll go ahead and hook it up to some 12-volt power. White wire's our ground, black wire will be our power.
Those two connect it. I'll go ahead and turn on the 12-volt power, and you can see it's a very bright light. Eight LEDs, 2,000 lumens. I'm going to go ahead and turn off the overhead lights just to give you an idea. The flood beam pattern, so it does eliminate a nice wide area. I'll go ahead and turn back on overhead lights. Go ahead and turn off our power, but that should do it for the review on the Great White flood beam LED work light with 2,000 lumens.
Average Customer Rating: 4.9 out of 5 stars (66 Customer Reviews)
5-7/8" x 4-5/8" Rectangle. LED utility light with 8 diodes produces a bright white light. Flood beam illuminates a wide area. Great White series features ultra bright white diodes. Impact-resistant polycarbonate lens. Pedestal mount.
Ordered these to add as lights inside my Decked truck bed cargo system. Work great. Note: To wire this up for a Decked cargo box inside light, you can either do a waterproof toggle switch, or go with a magnetic switch like you would use for an alarm system. I did the latter. You can tap into your bed lighting or to a constant 12vdc at the trailer harness. The magnet switches are set so that the lights turn on when I pull a drawer open, and off when I shut it. Attached some photos to show what they look like
The light itself is great! It would work better if there was a deeper recess on the bottom where it mounts to the trailer. This would help conceal the wiring and extend the light toward the rear of the trailer to better illuminate the license plate.
Very Nice Item
Well built, easy installation. Great people to do biz with
Have actually used used these in different setups. 2 enclosed trailers, a 10' long and 22 ' long. Also used 2 for pickup truck bed lighting mounted under the rails of a tonneau cover.
they have worked very well
Reordered after breaking on install. It wasn’t the products fault. Someone shut the trailer door on it just prior to final install and broke the lens. Light still works! Quality product!
This was a great replacement for the original lic plate light. I did have to drill one new hole because the new light base was a tad wider than the original base. The wiring was very simple: hot and ground and it worked like a champ.
Used to replace corroded incandescent back-up lights on trailer, these work great, easy to wire in, great illumination.
Getting ready to put this 2nd set into my trailer. Tied them right into the cheap ceiling lights and really brightened it up inside.
This light was easy to mount and connect. Add a great amount of light
Very good bright light. Running for a year now and no issues.
LEDs nice and bright easy to view way better than the traditional incandescent bulbs that were replaced
Excellent product, much better than the plastic one I replaced. Looks good on my trailer.
Worked great as a replacement light for my ARE commercial truck topper!
Excellent product and I will buy it again for my next trailer.
Working great, 1 year later. Perfect fit on my motorhome.
Just received my order in timely manner, can wait to get them installed! Thank you etrailer
These lights are so nice I just ordered two more to complement the inside of my trailer
Nice light. Easy website to navigate. Quick and easy to track shipping.
Good product, looks good and works well ..
Worked as expected-though could be brighter - no issues as of now.
Fit and finish were good and light is working as it should.
Installed easily and works well
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.