Filter Products
Filter Results
$7.99 - $299.95
$6.41 - $281.57
Filter by Application
$7.99 - $299.95
$6.41 - $281.57
Videos
for Work Lights
Help Articles
for Work Lights
Expert Answers
for Work Lights
The Opti-Brite LED Work Light #TLL60FB is a 2-wire light with black being power and white being ground. It will wire in to your trailer's existing wiring. As long as the current lights run on 12, 24, or 36 volt DC this light is…
view full answer...The Exterior LED Utility Light part #M337FR has three wires, one for power, one for ground, and one for neutral. I spoke with M-3 and they informed me that the light follows EU Wiring Specifications so the power should be brown, the neutral should…
view full answer...The Replacement LED for Tow-Rax Recessed Lights #TWPWLS110V50W that you referenced most likely would work fine on your trailer that has flood light buckets already installed in it. This is designed to fit internal bucket dimensions of…
view full answer...For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.
view full answer...We do have some options similar to the Optronics Halogen Utility Light #QH16CTS but a little smaller: - Vision X Utility Market Floodlight #XIL-UF32 (456 lumens and measuring 3-1/2" long x 1-7/8" tall x…
view full answer...The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.
view full answer...The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.
view full answer...Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
view full answer...If I understand you correct you have a trailer with separate turn signals and brake lights that aren't functioning properly because you 2013 Ford F-150's trailer wiring combines those signals on one circuit. If…
view full answer...I reached out to my contact at Diamond and she said that the USB Outlet #DG61USBVP has a 2.1 amp max rating. I have attached a short video review that you can check out as well.
view full answer...Hi there Matthew; appreciate that info and we do have the exact bearing kit you are looking for, with bearings BK2-100 and the 10-19 seal. What you need is the following: - Hub Bearing Kit #BK2-100
view full answer...An individual LED type light may not put out as much light as certain individual halogen lights do, but because, as you noted, LEDs use so little power you can use more of them. You could potentially BOTH increase your overall light output and…
view full answer...Videos
for Work Lights
Help Articles
for Work Lights
Expert Answers
for Work Lights
The Opti-Brite LED Work Light #TLL60FB is a 2-wire light with black being power and white being ground. It will wire in to your trailer's existing wiring. As long as the current lights run on 12, 24, or 36 volt DC this light is…
view full answer...The Exterior LED Utility Light part #M337FR has three wires, one for power, one for ground, and one for neutral. I spoke with M-3 and they informed me that the light follows EU Wiring Specifications so the power should be brown, the neutral should…
view full answer...The Replacement LED for Tow-Rax Recessed Lights #TWPWLS110V50W that you referenced most likely would work fine on your trailer that has flood light buckets already installed in it. This is designed to fit internal bucket dimensions of…
view full answer...For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.
view full answer...We do have some options similar to the Optronics Halogen Utility Light #QH16CTS but a little smaller: - Vision X Utility Market Floodlight #XIL-UF32 (456 lumens and measuring 3-1/2" long x 1-7/8" tall x…
view full answer...The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.
view full answer...The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.
view full answer...Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
view full answer...If I understand you correct you have a trailer with separate turn signals and brake lights that aren't functioning properly because you 2013 Ford F-150's trailer wiring combines those signals on one circuit.…
view full answer...I reached out to my contact at Diamond and she said that the USB Outlet #DG61USBVP has a 2.1 amp max rating. I have attached a short video review that you can check out as well.
view full answer...Hi there Matthew; appreciate that info and we do have the exact bearing kit you are looking for, with bearings BK2-100 and the 10-19 seal. What you need is the following: - Hub Bearing Kit #BK2-100
view full answer...An individual LED type light may not put out as much light as certain individual halogen lights do, but because, as you noted, LEDs use so little power you can use more of them. You could potentially BOTH increase your overall light output and…
view full answer...