Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
(758 reviews)
Price: $1,183.65
In Stock
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
Item # EQ37120ET
Our Price: $1,183.65
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (758)
- Q & A (0)
- Photos
Equal-i-zer Weight Distribution Hitch - EQ37120ET
- 1000 lbs
- 1100 lbs
- Fits 2 Inch Hitch
- WD With Sway Control
- Equal-i-zer
- Allows Backing Up
- Electric Brake Compatible
- Surge Brake Compatible
- Includes Shank
- Some Sway
Steel-on-steel friction works to prevent and correct trailer sway in this unique weight distribution system. Sway control brackets ensure that your trailer stays in line with your tow vehicle. 2-5/16" Hitch ball and adjustable shank included.
Features:
- Evenly distributes weight over axles of tow vehicle and trailer for stability and control
- Creates a level ride for both tow vehicle and trailer
- Integrated 4-Point Sway Control limits side-to-side movement
- Brackets keep spring bars in place for a rigid system that holds trailer in line
- Steel-on-steel friction helps to minimize sway caused by winds, curvy roads or sudden maneuvers
- No lift chains - eliminate unwanted movement
- Unique design makes system compatible with surge-type brake actuators
- Spring bars flex for a controlled, even ride
- Constructed of chromoly steel for superior dexterity and spring
- No-drill, clamp-on brackets can be adjusted along the trailer frame
- Accommodates frame-mounted items such as gas tanks, toolboxes or generators
- Desired tilt is achieved with traditional washer design
- Add or remove washers from spacer rivet to tilt head up or down
- Dipped steel construction is durable and corrosion resistant
- Snap-up lever eases installation by reducing lifting required by trailer jack
- System includes head assembly, adjustable shank, spring bars, sway control brackets, hitch ball, lift handle, pin and clip, and all necessary hardware
- 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation
- Made in the USA
Specs:
- Tongue weight: 800 lbs - 1,200 lbs
- Gross towing weight: 12,000 lbs
- Ball size: 2-5/16"
- Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
- Lift-bracket positioning: 27" - 32" back from center of coupler
- Maximum trailer frame height: 6"
- Shank length:
- 8" From center of hitch pin hole to center of adjustment holes
- 9" From center of hitch pin hole to front of shank
- 7" From center of hitch pin hole to back of shank
- 12" Overall
- Total height adjustment along shank: 7-1/2"
- Maximum rise: 7"
- Maximum drop: 3"
- Overall height: 9-1/2"
- Holes are spaced 1-1/4" apart on center
- Spring-bar dimensions: 35-1/2" long x 1-1/2" wide
- Limited lifetime warranty
| Included w/ System | Required - Sold Separately | Optional Add-Ons |
|---|---|---|
90-00-1200 Equal-i-zer Weight Distribution Hitch
| n/a |
|
Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.
Selecting a Weight Distribution System
The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.
To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.
Features of the Equal-i-zer
Head Tilt Adjustment
The Equal-i-zer weight distribution system uses the traditional washer-style adjustment method to achieve the perfect tilt. Controlling the head tilt helps you to fine-tune the leverage on your entire system, making it easier to install and hook up the spring bars. To adjust the tilt, simply slide washers onto the spacer rivet and insert the rivet into the head assembly. To increase the angle, add a washer. To reduce the angle, remove a washer. Most setups take four to six washers to achieve the proper height. Once you get the desired tilt, insert the shank bolts to secure the head to the shank and then tighten it in place.
Construction of Spring Arms
The Equal-i-zer spring bars are not made of traditional spring steel. Rather, they are constructed of a chromium-molybdenum alloy steel. Chromoly steel has a high tensile strength for extreme durability. It also features excellent dexterity, which allows it to give as required and then return softly back to its original form. This pliability is important in minimizing trailer bounce while still ensuring that the weight of your rig is adequately distributed.
Fixed Sway Control Brackets
The unique sway control brackets of the Equal-i-zer are easy to install and simple to use. They clamp onto your trailer frame and conveniently adjust to a position anywhere between 27 inches and 32 inches back from the coupler. These brackets provide the attachment points for the weight distribution spring bars. To position the spring bars during hookup, simply use the included snap-up lever to lift each bar into place on the L-shaped brackets. Then secure the bars in place with the included L-pins and clips.
Equal-i-zer Hitch 4-Point Sway Control
The Equal-i-zer weight distribution system works to stop trailer sway before it begins. This is achieved through the rotational friction that is present in the weight distribution hitch itself. Within the system head, the downward pressure that is placed on the hitch ball by the trailer is combatted by the upward pressure exerted by the spring bars that are mounted in the sockets. This upward force is placed on the spring bars on either side of the system, creating the rotational friction that, essentially, forces your trailer in line. This type of friction is responsible for two points - one on either side of the trailer - of the 4-Point Sway Control. To ensure that enough tension is present, make certain that the socket bolts in the head assembly are torqued to at least 45 foot-pounds.
The other two points of sway control are created by the steel-on-steel friction that occurs when the spring bars slide within the L-brackets that are mounted on the trailer tongue. Most traditional weight distribution systems have spring bars that are suspended by chains. Although this ensures that the system is not so rigid as to create bounce in the trailer, it also allows a good deal of side-to-side play in the system. Letting the spring bars hang freely minimizes the rotational friction described earlier. It also eliminates your system's ability to create the type of direct friction that has been shown to be so effective in limiting trailer sway.
This direct friction that is applied to the spring bars in the Equal-i-zer system helps to stop sway once it has begun. The concept is similar to the way in which an add-on friction-sway-control device functions. When each spring bar moves forward or backward, or side to side, it rubs along the bracket, creating friction. The resistance created by this action limits the movement of the spring bar, thus preventing further side-to-side movement of the trailer.
Most add-on units feature some sort of friction material similar to that used in automotive brakes. But the Equal-i-zer uses direct steel-on-steel contact to create resistance. This is the same sort of friction that is used with locomotives that pull loaded railcars weighing tons. No additional materials are needed. The steel will outlast any of those other materials, providing an extremely durable, functional sway control system.
EQ37120ET Equalizer Weight Distribution Hitch with Adjustable Shank and Hitch Ball - 12K
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW - EQ37120ET
Average Customer Rating: 4.8 out of 5 stars (758 Customer Reviews)
Steel-on-steel friction works to prevent and correct trailer sway in this unique weight distribution system. Sway control brackets ensure that your trailer stays in line with your tow vehicle. 2-5/16" Hitch ball and adjustable shank included.by: MarkG01/23/2019
I have been using this EQ hitch towing my Bullet crossfire travel trailer with my F-150 for over a year now and it handles great. Tows smooth and without jerking or a rough ride. It took a few times to properly balance it and adjust it properly but what a major improvement from towing without it. I recommend this EQ hitch very much!!
by: Tom D07/15/2016
Ordered the Equal-I-zer weight dist hitch as a reaplacement for original W/D anti-sway hitch trailer dealer sold me (was getting quite a bit of sway). Relatively easy to install, instructions were very easy to follow, getting a torque wrench (430 ft-lbs) for the ball had been my only concern. Weight distribution was right the first time, truck and trailer sit nice and level. The trailer tracked very well and there was no sway when being passed by large tractor-trailers. Less noise than I expected after reading reviews when researching hitches. Very happy with the hitch and the GREAT service from etrailer. Highly recommend.
by: Joe F.10/11/2016
Was needing a weight distribution system for towing my 16' toy hauler and with Kats help from etrailer I couldn't be happier with this product. Trailer has a dry hitch weight of 950lb and 1100lb loaded. Set up took me an hour or so, but now I feel comfortable hooking and unhooking. Took it on a 100 mile trip a few weeks back in heavy rain with strong wind gust and handled great! Without it I didn't feel safe going 60mph on calm sunny day.
by: Nathan H.10/10/2016
I purchased this hitch for a 9000lbs travel trailer with a 1001lbs tongue weight.
If your debating between a less expensive round bar and this setup, spend the money. This hitch is by far a better, easier, and safer setup.
I purchased this hitch to replace a Pro-series round bar with a friction sway control bar. The Equal-i-zer's 4 point sway control is big step up from a single point sway control system. The 1st drive felt secure and safe.
Install was easy, but time consuming for a 1st time installer. But worth it in the end.
Here's some pointers. 1. get the right tools, rent or barrow a the torque wrench to do the hitch ball 430ft/lbs, and shank bolts 320ft/lbs. The piece of mind that it's correct is worth it. 2. Plan for the afternoon, not a couple of hours. 1st setup is going to be close but your going to have to adjust it so plan on taking something apart. but setup is relatively easy, esp with the right tools. I had the trailer level the 1st go around to 2.5". So I had to move the head up one hole in the shank and then it was within 1". Distribution setup was still with in a proper setup, so I didn't have to make any further adjustments.
As far as the coupling and uncoupling the hitch. Using the tongue jack to release the tension is easy to do and quick. Esp. with an electric jack. I never liked the round bar with chain setup on my previous hitch.
High quality, easy install and setup, and seems to have great sway control.
by: Nicole11/24/2018
I'm completely new to towing and the RV world. I searched high and low for a hitch that would make towing my 29 ft RV the least stressful as possible. I found this one but was still a little nervous about the whole experience.
Once it arrived in so many pieces I did get overwhelmed, but the videos and booklet provided truly helped a complete amateur put it together without issue.
And then once I drove with it, WOW!
I honestly forgot I was towing a 29ft RV at times. I had no issues turning and no issues handling. The weight distribution really did work. I even drove it in torrential downpour and had no issues with sway at all.
I am so impressed with this product and am so happy I found it. A true life saver for a beginner!!
by: Benjamin02/24/2018
Hitch works perfect. I first used it to pull my 24 ft car hauler with my Yukon XL and it worked flawlessly. I upgraded trucks to a 2500 Duramax and reset the hitch for it and all is perfect still.
Great quiet hitch!
by: Adam G02/05/2018
This hitch setup is worth every penny. Install was not painful and instructions were clear. After setup was finished I took her for a spin and I was amazed at the difference. The ride was smooth and no sway!!!! No more friction sway control for me!! I would recommend this to anyone who is in the market for a WD hitch.
by: Dana K05/30/2017
I installed this hitch on my 2007 Toyota Tundra. I use to have the chain style. Big difference when getting next to rigs. This hitch is a much tighter tow. Glad I upgraded.
by: Kent06/07/2019
The Staff at etrailer made the purchase simple and very helpful in picking the right tow package product. Installation instructions were sent when the product arrived. Great product n company!
Thank you so much Connie!
by: Brandon02/27/2023
This has been the second hitch I’ve ordered that didn’t come with the hitch ball when it says it does. Not sure if the description is inaccurate or if something has happened in transit both times (both times the box came damaged with a hole in it) , but I was able to order the ball separately and I love the hitch which is why I give the product 5 stars. I just hope the company sees this and figures out a way to prevent this from happening in the future.
by: Richard 04/05/2023
I love the stability of the Equal-i-zer 4-point sway control system. 15,000 miles and my tow vehicle and travel trailer have an "excellent relationship".
by: Jurgen10/22/2012
I have been hesitant to review this product as I have had several issues with it....not necessarily the product itself, but my use and application. To start out, I should have used a different drop down hitch. The one that came with the unit does not allow the ball to sit low enough for the trailer to sit level once everything is set. Get the right amount of weight transfer and the nose of the trailer sits high which has a negative impact on towing. Less weight transfer for a level trailer means to more truck nose lift, dangerous sway, dangerous driving. The worst part is that if I had been aware and asked to change the hitch, it might have only cost me 10-20 dollars. Now I need to purchase a new hitch with a bigger drop, which will cost me around 150 bucks. I do believe that this will make a big difference. As I have gotten the setup closer to correct, it does seem to work well. I do however feel that the teflon plastic slide pads for the L brackets would be a worthwhile investment as it is noisy when making slow speed turns, which can be dis-concerting
Donny
2/1/2014
You realize that the friction where the spring bar slides in the L bracket is responsible for the sway control right? Reducing the friction would reduce the sway control of the unit... I am interested to try this product. I think what you are saying about getting the right set up for your individual rig is the most important thing.
by: Ronald02/11/2018
We made a trip to the Pacific Northwest from Arkansas and I have to say, the hitch performed perfectly. Even in a high wind, which is common in Wyoming and the plain states there was no problem keeping a straight line going down the road. One time, when I wasn't paying attention and ran off onto the shoulder of the road, the trailer didn't sway at all but kept straight and allowed me to return to the road without incident. I would recommend this hitch to anyone pulling a trailer of any significant weight behind them. I have a 33 foot RV and pulling it with a 2015 Chevy Silverado 1500.
Ronald
2/11/2019
Its been over a year since I purchased my Equalizer hitch system and I am completely satisfied with it. Occasionally I have to spray some lubricant on the pivot points on the receiver end to keep the noise down but other than that It works as advertised and I would again rate it 5 stars.
by: Jim H.07/06/2017
The Equalizer Weight Distribution System w/4 point sway control is as good as advertised. The installation took me approx 2.5 hrs and it was not difficult, just took a little time to make fine tuning adjustments to get the performance from the system that I wanted. The Equalizer System has removed an estimated 95% of the sway issue that I was having while pulling a 29 ft travel trailer with a mid-size Chevrolet Colorado pickup. Looking forward to getting out on the road and giving it a thorough testing, but so far it meets my expectations.
Jim H.
7/6/2018
This hitch was a great investment!! It has made a huge difference in how my trailer handles in the Texas winds. I used to get white knuckled every time that I set out on a trip with my previous chain hitch and seldom ever felt comfortable in pulling the trailer at speeds in excess of 45 mile per hour. Now I can move along at normal Dallas freeway speeds in comfort. This hitch was a welcomed addition to my RV experience.
by: Joe01/24/2019
Heavy duty hitch, very good quality, easy set up. Did a lot of research, and I'm glad I chose this hitch. Thanks etrailer.com
Joe
1/25/2020
After using this hitch for a year now, Im still glad I chose it. Its a heavy duty hitch, and heavy to handle, but worth every penny. It makes towing our travel trailer a breeze.
by: Bk Smiles03/26/2020
Biggest Pros:
- Easy to install initially (though I did have to buy a special socket, 1 7/8, to hook up the ball, so this could be a con too. A wrench won't work)
- It really does do a great job of stabilizing the trailer going do the road)
Biggest Cons:
- Weights around 100 lbs and has actually threw my back out trying to hook it up.
- Hard to connect stabilizing bars, as well
That said would not buy again or recommend, am currently looking for a better solution. The Doctor bills alone could cover a much more expensive unit. Not to mention the pain!!! Together these reasons are enough for me to NOT recommend!
NOTE: I am a 38 year old man that exercises and lifts weights at least 5 days a week, usually 7; my life revolves around the gym. I say this only so you believe me - This thing is heavy and awkward.
SAVE YOUR BACK - GO A DIFFERENT ROUTE
by: Dale H.06/01/2017
All good with this hitch! We have pulled in high cross wind without much noticeable sway. Our truck and the trailer are level. After I learned the trick of raising the tongue a little above horizontal, I can install and remove the arms without using the cheater bar. I had to adjust the hitch after I traded trucks but it was a simple thing and took very little time. We've had people stop to look at it because they were tired of using the hitches with chain adjustment. Couldn't be happier. The support from etrailer staff is great.
by: Mark10/27/2022
Ordered Equalizer hitch assembly on line. Best price and free shipping. Weighed over 100lbs! Got to my house as stated in 3 days! I use them all time!
by: Jeff Pheneger07/23/2016
Great product except for one thing. If you are going to sell this hitch either sell it with ball already attached or include the 1 7/8 thin wall socket with it. Could not find socket anywhere locally and finally had to dismantle Equilizer bar sockets which is no easy task , and then use regular socket that I already had, what a pain. Other than that great service and ultra fast shipping. I think I ordered it Tuesday night and had it Friday night. Great job.
Will repost once all is installed and try it out.
Jeff P.
7/23/2017
Best hitch on the market for anti sway and load equizling. Quick hook up, love it!
by: Don03/06/2019
12000 lbs. hitch was a great improvement over my previous bent bar hitch with chains. Trailer sway has decreased a lot. MY 35 foot trailer pulls straight except when it is windy. I am no longer bothered by passing vehicles. Was noisy until I added the nylon pads from equalizer. Much quite now.
Mike L.
3/6/2019
Keep in mind that the jackets or pads will decrease the effectiveness of the sway control to a degree because they limit some of the metal-on-metal friction which provides the sway control.
by: Don H04/22/2017
Hadn't had a chance to use on road yet, but look like a very high quality product. Installation was very easy! Only took a couple hours to get installed and adjustments made. Watching video on etrailer.com will help, but included instructions are also pretty easy to follow. Shipping was extremely fast! Ordered on a Wednesday and it was at my door in south Georgia by 1:00 pm on Friday.
Don H.
4/24/2018
Very pleased with this hitch system after 1 yr of use. Did have to make one change to it, but that was not due to product defect. Originally ordered it with a 2 shank and later purchased a truck with 2.5 receiver. Tried using an adapter sleeve, but did not like the excess play with the sleeve. Felt more sway when towing. Was also a hassle to get 3 sets of holes to line up for hitch pin! Purchased a new 2.5 shank and all is good again!!!
by: Herman S11/07/2016
I received this hitch about a month ago and couldn't install right at first due to some issues I was having but I have finally got it installed and set up right. This is great! I will go on my maiden voyage Memorial weekend but I'm sure it is going to perform as expected. Excellent price that no one can touch. Instructions are easy to follow and detailed the way it should be. Time, was about as expected, so don't rush because you don't want to miss any steps.
Herman S.
11/7/2017
Well I have owned this hitch for a year and it has worked flawlessly. In July we took our camper on a 2000 mile trip and we had no issues with the hitch at all. We were in all types of traffic through large and small cities, we didnt have any sway issues because the hitch, now broken in, works much better than I knew it would. I had installed the pads under the slide bars and use the grease to quieten it down when in all the turns I made during this trip. I dont believe there is a better hitch out there that can tame my 38 ft 9000lb Jayco than this Equalizer. Best money spent here. 11/7/17
by: Tom03/07/2018
Works great. We live in the mountain area of East Tennessee. I hit mountains no matter which way we travel. Been to Western New York to Central Florida. No problems.
by: Vincent10/26/2018
I cannot rave enough about this set up. I tow about a 10K trailer (RV when fully loaded) with a Ford F150 (yes an F150... but it was built for towing heavy and in fact, is actually rated better than my F250 Super Duty to tow heavy).
But it is working hard, no doubt and with this hitch I really cannot tell the trailer is there. In my humble opinion, best on the market, even tows better than my goose neck did.
I have put the same set up on my 4 horse trailer and will do so for my car hauler soon.
by: Rudy11/18/2017
Fantastic Hitch! etrailer had the best price by far, arrived within 4 days of placing the order in excellent condition with no shipping damage or missing parts. Mt RV Dealer did the original setup, but their installers apparently never watched a video on proper installation, as they took no before or after measurements of my truck wheel well height, never used a torque wrench, and placed the sway bracket assemblies at 27 inches from the ball when 32 inches (factory recommended distance) was easily available on the trailer. Many other install errors as well like incorrect number of spacer washers and incorrect L bracket mounting hole positions, all of which caused my 2016 Ford F-150 to squat while towing. Never assume the dealer service department knows what they are doing! Once home, I set the hitch up as instructed by Equal-i-zer without too much difficulty. This hitch now has my truck sitting level and tows like a dream with very little sway at all, and I tow a 35 foot travel trailer. Keep the hitch lubed as instructed, and use the optional sway bracket jackets and this hitch is fairly quiet. Well worth the money, no more white knuckles!!
25
753
Show More Reviews
See what our Experts say about this Equal-i-zer Weight Distribution Hitch
- Can You Switch Between 10K and 12K Equal-i-zer Weight Distribution SystemsThe 10K and 12K Equal-i-zer Weight Distribution Systems like part # EQ37100ET and part # EQ37120ET use different heads and spring bars so if you wish to switch back between the two capacities you will need both of these items which I have listed for you below. Equal-i-zer 10K Head part # EQ90-02-1000 Equal-i-zer 10K Spring Bars part # EQ90-01-1099 Equal-i-zer 12K Head part # EQ90-02-1200 Equal-i-zer 12K Spring Bars part # EQ90-01-1299
view full answer... - Tools Needed To Replace 12,000LB Equal-i-zer Hitch Ball On Weight Distribution HitchTo replace your 2-5/16" Equal-i-zer Hitch Ball # EQ91-00-6120 you will need a Thin Wall Socket # EQ70-00-4800. You will also need a 3/4" drive ratchet, 6" extension, large crescent wrench and 3/4" torque wrench capable of 450 ft-lbs of torque. You will likely also need some penetrating oil to help remove the nut especially if you can see a lot of visible corrosion. I have linked the installation instructions for the Equal-i-zer Weight Distribution System # EQ37120ET below so you will...
view full answer... - 48" Hitch Extension For a 2013 Ford F-350 Capable Of Pulling 10,000LBSThe TorkLift SuperTruss Hitch Extension # TLE1548 is the only 48" hitch extension we carry capable of supporting the 10,000lbs of trailer weight you are wanting. This extension must be used with the TorkLift SuperHitch Original Trailer Hitch Receiver # TLF1002 on your 2013 Ford F-350. The Extension # TLE1548 is capable of towing up to 12,000lbs with up to 1,200lbs of tongue weight when using a weight distribution hitch. Without a weight distribution hitch trailer weight is limited to 6,000lbs...
view full answer... - Availability Of a Drop Shank With 2-1/2" Receiver Tube For Equal-i-zer 12,000LB Weight Distribution We do offer the 12,000LB Equal-i-zer Weight Distribution System with a 2" Shank # EQ37120ET like you found or with no shank # EQ37121ET. Then you will be able to add one of the 2-1/2" shanks from the list below depending on how much drop you may need. Up to 3" Drop # EQ90-02-4700 Up to 4" Drop # EQ90-02-4800 Up to 6" Drop # EQ90-02-4900 Up to 9" Drop # EQ94FR Up to 12" Drop # EQ34FR
view full answer... - How Weight Distribution System Works On a 2021 Toyota TundraThe weight distribution system will help disperse the tongue weight of the trailer across both axles of the vehicle. It's not responsible for supporting all of the trailer's weight nor does it take all of this away from the trailer hitch on the tow vehicle. It does however lessen the load on the trailer hitch hence why the capacity of the hitch increases when used. I recommend the Equal-i-zer Weight Distribution System with 4-Point Sway Control part # EQ37120ET which will give you plenty...
view full answer... - Recommended Weight Distribution Hitch for Camper With 955 Pound Tongue WeightThe Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW # EQ37120ET you looked at would be a great choice for your camper. The tongue weight range on this system is 800-1,200 lbs so your actual tongue weight falls nicely in the middle. This WDH will do a great job keeping you level while reducing sway with the integrated 4-point sway control. Since you are looking for additional clearance, I recommend the # EQ37121ET without the shank. Then, you...
view full answer...
- Best Weight Rating for my Equalizer Hitch and a Camper that Weighs 7500 lbs.Yes the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW part # EQ37120ET is designed to work with a tongue weight of between 800 lbs - 1,200 lbs. In your case your tongue weight should be right in that area depending on how you load it up. The tongue weight of the trailer is the most important factor in getting the right one for your application.
view full answer... - Hitch Recommendation For A 1999 Ford E450 Shuttle BusLooking to the towing section of the owners manual for the 1999 Ford e450, though it never specifically calls out the e450 model in the Trailer Towing Table, for every model with a 7.3 Diesel and 4.10 rear axle ratio, the maximum GCWR is around 20,000lbs and trailer weight of 9,500-10,000lbs. My recommendation is the Curt Trailer Hitch Class IV Receiver # 14053 rated for 1,000lbs of tongue weight and up to 1,200lbs of tongue weight when used with a weight distribution system. A weight...
view full answer... - Recommended Equal-i-zer Weight Distribution For a Travel Trailer With Factory Hitch Weight Of 760lbsI recommend using the Equal-i-zer Weight Distribution System # EQ37120ET with your trailer. This hitch is rated for a tongue weight of 800-1,200lbs and a maximum weight of 12,000lbs. With the dry hitch weight of 760lbs and the dealer installing a 50lb Battery # BRW34FR and filling the propane tanks this will put you over the 800lb minimum weight requirement. You will need a 1-7/8" 12pt Thin Walled Socket # ALL643216 to install the included 2-5/16" hitch ball.
view full answer... - Is the Equal-i-zer 14K Weight Distribution System Too Much for a 7,500 lb - 8,000 lb TrailerThe Equal-i-zer Weight Distribution System w/ 4-Point Sway Control part # EQ37140ET would be a bit too overrated for a 7,500-8,000 lb trailer and if used there would some negative effects such as ineffective sway control. That said, it's pretty easy to switch to the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control part # EQ37120ET because all you will need is the Replacement Head for Equal-i-zer Weight Distribution Systems part # EQ90-02-1200. The new head would then provide...
view full answer... - How To Change from Equal-i-zer 14K to 12K SystemIn order to convert the Equal-i-zer Weight Distribution System part # EQ37140ET which has a 14,000 lb capacity to the Equal-i-zer Weight Distribution System part # EQ37120ET which has a 12,000 lb capacity you only need the Replacement Head for Equal-i-zer Weight Distribution Systems part # EQ90-02-1200. The spring bars are actually the same between the 12,000 lb and 14,000 lb systems.
view full answer... - Can Reese Strait-Line Weight Distribution Fit with C Channel Trailer FrameWhile the Strait-Line Weight Distribution w/ Sway Control - No Shank # RP66074 is a great option, since your trailer has a C channel we will need to find you a different system as the Strait-Line is designed to clamp down on both sides of the trailer frame. For your application I recommend going with the Equal-i-zer System # EQ37121ET instead. This has the same weight capacity as the Strait-Line system but it uses brackets that fit around your C channel and then you can place some wood...
view full answer... - Trailer Hitch Rated for 10K Towing for a 2003 Dodge Sprinter with 140 inch Wheelbase and DRWThe Curt Class IV Trailer Hitch # 14250 will only fit if your 2003 sprinter has the 140 inch Wheelbase with Single Rear Wheels. Since you have a 140 inch Wheelbase with Dual Rear Wheels the next best option is the Curt Class III Trailer Hitch # 13265 which is rated for 6K Towing/600 lbs Tongue but then jumps up to 10K Towing/1K Tongue when used with a weight distribution (WD) system like the Equal-i-zer w/ 4-Point Sway Control # EQ37120ET. Please note that your Sprinter must be rated for...
view full answer... - Recommendation For Reducing Rear End Sag On Lifted 2017 Ram 1500 When Towing a Travel TrailerThe best way to help reduce sag when towing your travel trailer with your 2017 Ram 1500 Bighorn having a lift is with a weight distribution hitch. Personally I fee the Equal-i-zer hitch systems are the best option as they are made in the USA and have a reputation as being one of the best available. You do need to select the correct system based on the weight of your trailer. 200-600lbs Tongue Weight, Trailer Up to 6,000lbs # EQ37060ET 600-1,000lbs Tongue Weight, Trailer Up to 10,000lbs...
view full answer... - Recommendation for Reducing Rear End Sag On 2017 Ram 1500 Hauling a 12,000LB Dump TrailerUsing the Equal-i-zer Weight Distribution System # EQ37120ET when connecting to your Griffin GT-712 dump trailer is going to be the best way to reduce rear end sag and make driving loaded much safer. This particular hitch is rated for a trailer up to 12,000lbs with a tongue weight of 800-1,200lbs. The Equal-i-zer help to transfer weight more evenly across your 2017 Ram 1500 so it will reduce rear end sag while also adding weight to the front suspension which will help reduce diminished...
view full answer... - Weight Distribution/Sway Control for 5700 lb Travel TrailerFor a camper that size, I'd highly recommend a weight distribution system with an integrated sway control component. Because of their high sides, travel trailers are very susceptible to trailer sway caused by crosswinds and turbulence from passing/oncoming traffic, which makes travel uncomfortable at best or downright dangerous at worst. To determine which system is right for your needs, you'll want to find the tongue weight of your travel trailer when it's fully loaded up as it would...
view full answer... - Does Length Matter When Towing with a Short Wheelbase VehicleThe biggest factor to consider when towing a long trailer with a short wheel base tow vehicle is trailer sway. There is no standard ratio for wheelbase to trailer length, but the general rule is a longer trailer and a shorter wheelbase will increase the severity of trailer sway. For your towing setup, I strongly recommend considering a weight distribution system with integrated sway control like the Equal-I-zer systems because they will be your best solution for fighting trailer sway....
view full answer... - Recommended Trailer Hitch and Weight Distribution System for a 2016 Ram 1500A trailer hitch receiver that's rated for 6,000 pounds towing is almost certainly a Class III hitch. The receiver opening will be 2 inches as well. A Class II trailer hitch generally maxes out at 3,500 pounds and is a 1-1/4 inch opening. I'd be really surprised if your 2016 Ram 1500 has a Class II hitch on it. With that being said I'm not sure it really matters because it sounds like what you really need a hitch that's rated higher than 6,000 pounds regardless of what Class it's considered....
view full answer... - What Is the Tongue Weight Capacity For a 2012 Nissan Armada and What WDH Should I UseI took a look in the owner's manual for your 2012 Nissan Armada and on page 9-22 it states that this vehicle has a 900 lb - 910 lb tongue weight capacity therefore I cannot recommend you go over this. That said you would most likely be okay if the hitch weight you are referring to is wet and not dry but again I cannot recommend this. The amount of tongue weight your trailer has is going to require the use of a weight distribution system per the manual and it will also be good to get some...
view full answer... - Weight Distribution Systems for Travel Trailers with Nissan ArmadaYou are correct that weigh distribution systems can be used to help distribute a trailer's tongue weight across the tow vehicle to let the trailer sit more level and improve braking and handling. Your vehicle might have an increased tongue weight capacity listed by the manufacturer for when a weight distribution system is installed, but a weight distribution system won't inherently increase the tongue weight capacity of your vehicle. With that being said, the Nissan Armada you are looking...
view full answer... - Is the Shank of Equal-i-zer Weight Distribution System Solid or HollowThe shank of the Equal-i-zer Weight Distribution System # EQ37120ET that you referenced is solid. Equal-i-zer is widely considered by many as the best weight distribution system brand around partly due to how well their parts are made. The shank would hold up great over time and would not fatigue and fail.
view full answer... - How to Verify Equal-i-zer Weight Distribution System is Properly Rated for Trailer Tongue WeightThe 2015 Forest River Vibe Extreme Lite 312BHS travel trailer has a dry weight spec of 7805-lbs according to the NADA Guide. Once the trailer is loaded the gross weight and tongue weight will naturally be higher. All weight distribution/sway control (WD/SC) systems are designed to work over a range of trailer tongue weight (TW). The ideal is that your trailer's actual total loaded TW will fall in the middle of the system's range. This total TW includes the measured TW of the trailer...
view full answer... - Recommended Equal-i-zer Weight Distribution System for Car Hauler with 800-1,100 Pound Tongue WeightIf the loaded tongue weight on your car hauler varies between around 800 pounds to 1,100 pounds, I recommend going with the Equal-i-zer Weight Distribution System # EQ37120ET. This particular system features a tongue weight capacity of 800 to 1,200 pounds, so while it might be just a tad over-rated when towing on the lighter end of your range, it will still work nicely to provide you with the benefits of a system like this. Then when you are on the higher end, you will still sit comfortably...
view full answer... - Is Weight Distribution System Longer than Standard Ball MountWhen compared to a standard ball mount weight distribution systems like the Equal-i-zer part # EQ37120ET do have the hitch balls out a bit further. The ball center will be about 11 inches from the hitch pin hole depending on the angle the head of the system is set at. A standard ball mount will have this distance between 6 and 9 inches typically.
view full answer...
Do you have a question about this Weight Distribution Hitch?
Info for this part was:
Updated by:
Dan D
Updated by:
Kathleen M
Updated by:
Laura H
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Hannah L
Updated by:
Mike S
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Markg
1/24/2020
Excellent! I have towed over 5000 miles in 2 years with this hitch now and it is still like new. What a great purchase.