bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Jeep
  3. 2007
  4. Tekonsha
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118425
Our Price: $43.90
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Jeep custom fit vehicle wiring experts, and offer a great price. etrailer.com carries a complete line of Tekonsha products for your Jeep 2007. T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part 118425 from Tekonsha can be ordered online at etrailer.com. Complete custom fit vehicle wiring installation instructions and technical support.
  • All Info
  • Reviews (363)
  • Q & A (0)
  • Photos

Tekonsha Custom Fit Vehicle Wiring - 118425

  • Trailer Hitch Wiring
  • 4 Flat
  • Custom Fit
  • No Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind tail lights
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. If extra length is needed, you can cut the zip tie on the passenger side harness.


T-One Connection Location Points Behind Tail Lights

Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118425 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118425 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118425

Average Customer Rating:  4.7 out of 5 stars   (363 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.

by:

Great service, products works great. Had to remove 1 zip tie to gain the length needed to get to both tail lights. Follow the path of the vehicle wiring and the wiring tucks nicely.

Jacob

5/13/2024

So far so good. No complaints after a year.



by:

The wring harness was very easy to install. It is working just fine after one year. I was careful upon installation to make sure no wires would hang down creating an opportunity to get snagged. We hunt with our vehicles so often time we will be in a harvested field driving.



by:
2012 Jeep Grand Cherokee

Perfect product and transaction all around!! Other reviews said wiring was a bit short but cutting a zip tie would help wire length. Worked perfectly. Install was a breeze and went just as smooth as the video provided for my Jeep. Also bought the trailer hitch as well. Installing both took less than 30 mins. If, like me, you were worried about quality because the price is so low. Worry not!!! The quality is there. The inflated price is not. Welds on hitch are good and powder coating is flawless. Wiring is plug and play. (pun intended) If your thinking about buying. STOP. Just buy it and you will be as pleased as I was. ~2012 Jeep Grand Cherokee~



by:
2012 Jeep Grand Cherokee

I ordered this harness for my Grand Cherokee and couldn't be happier. It came within a few days choosing economy shipping and the installation was ridiculously easy. There is even an online video with step by step instructions for this exact product. I completed the install myself in under 30 minutes. Did a brake/signal check and everything worked perfectly. Great product, great service. Very happy with this purchase.



by:
2011 Jeep Grand Cherokee

Very dissatisfied with the wiring harness. Way too short. A number of your reviews indicated that this. We had to splice a number of wires. Your solution was to cut the small zip ties on the wires. We did that. Still too short. Probably will not use this product again.`



by:
2009 Jeep Grand Cherokee

This is GREAT !
everything including
wiring harness was a perfect fit. It took me 1 hour and 15 min start to finish for install.
Well done Etrailer



by:
2009 Jeep Grand Cherokee

Everything fit as it should. The connectors could be a bit more sturdier. Very delicate plastic.



by:
2010 Jeep Grand Cherokee

Wiring harness was so easy to install, it took me less then 30 minutes to get it installed! Way cheaper then uhaul charges! Very happy.



by:
Jeep Grand Cherokee

It was super easy to install this trailer light setup on my Jeep Grand Cherokee. Works perfectly and have had no issues with it.



by:
2007 Jeep Grand Cherokee

Product was super easy to install I've sent a pic of the hitch installed my Jeep is a work in progress thank you for a great product.

Hugh

Hugh B.

3/25/2018

awesome love it!!!



by:

unit did not fit had to add wire so it would reach from tail light to the other. And this was the second harness I ordered the first one was totally wrong

Etrailer Expert

Jenny N.

11/8/2022

It can seem like that there is not enough wire in the harness. To get enough length, all you need to do is cut the zip-tie that holds the two halves together. Peel the bonded wire apart till you get enough length, then you can tie them back with a new zip-tie.



by:
Jeep

Buying from etrailer was very easy and got my order very quick. Website helped ensure that hitch and wiring fit my Jeep. The hitch looks really good and installation was simple. Definitely recommend etrailer!



by:

Hello Mr. George J (etrailer.com):
My
experience with etrailer.com was GREAT!!! I purchased a Draw-Tite Trailer Hitch Receiver, T-One Wiring Harness and Four Pole Bracket. Your website, instructions, sales, and shipping were Top Shelf!!!
Many thanks for the GREAT Service!!!!!!!!!!!!!
Sincerely,
Don D.
Waterford, Connecticut

Don D.

4/25/2018

Hope all is well with you and your team at etrailer!!! The three trailer items I purchased from your company are working GREAT!!! The items are of very good quality and they were priced appropriately. Also, thank you for continuing to send me product updates. Very helpful!!! Thanks for the Great Service!!!



by:
2007 Jeep Grand Cherokee

Good product with quality connections. My only negative comment is that the wiring could be about 2"-4" longer for my application (2007 Grand Cherokee). The wires were just too short in overall length and made the installation longer than it needed to be. I did get it in, but almost had to remove the rear bumper to make everything fit perfectly. All in the harness works great - install was just a pain as things were tight.

Andre F.

5/11/2016

Works fine - Couldve been 4 longer so it would give a smidge of slack. Pain to install



by:
2011 Jeep Grand Cherokee

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118425 came exactly as advertised and installed exactly as shown in the instructional video. Great product, fast service and delivery, liked the email updates on shipping and delivery...

Max

7/31/2018

There has been no issues with the product...still working exactly as it did on the first day.



by:

came 3 days early



by:
2010 Jeep Grand Cherokee

The delivery was fast, took it less than a week to come in. This product was so easy to install. It took me an hour to put the hitch and wiring harness in my 2010 Jeep Grand Cherokee. I haven't got to pull anything with it yet but as of right now I think it's a good product.



by:

Have Jeep Grand Cherokee and have added an etrailer hitch. This wiring harness will complete the project allowing use of utility trailer. Like the fact that no wiring has to be cut or tapped to install. Perfect for my use.

Lanier

6/22/2020

Still works exactly as expected. Usage down during Covid-19 situation.



by:

Easy to install and works great on my j eep



by:
Honda Pilot

Easy to install, works great. Suggestion: watch the video rather than use the included instructions, if possible. The instructions are fine, but the video shows where to route the wires through the bumper. After reading the suggestions in the reviews, I snipped one of the wire ties holding the two cable sets together to make sure I had enough cable length to stretch over to the passenger side. Make sure you have a couple of coat hangers or heavy wire to fish the wires through your bumper pipe. Even though person in the video was able to install the ground screw without drilling a pilot hole, I was not able to, so I needed to drill a pilot hole to get it started.

Todd S.

3/15/2015

The harness works great. I upgraded it to a round 7-wire harness with electric brakes. No need to discard this kit, it simply powers the lights while a new wire powers the brakes on the new 7-wire connector.



by:
2012 Jeep Grand Cherokee

The product is very easy to install. For those with comments about the wires being too short to get to the passenger side, all you have to do is cut a zip tie on the harness and there is more than enough wire supplied. Installation took about 30 minutes and the video on the website is excellent. The shipping and notification procedures with e-trailer are great. It's a pleasure doing business with them.

Kyle

7/15/2014

Product is holding up very well. No issues whatsoever. Excellent all the way around. Would recommend without hesitation.



by:
2011 Jeep Grand Cherokee

The product quality is excellent, BUT the 2011 model year JEEP GC has changed. The wiring harness is to short! I had to add additonal wiring by cutting and splicing additional length.

This product needs to be upgraded to fit 2011 Jeep Grand Cherokee.

Etrailer Expert

Patrick B.

11/21/2012

To get enough length, all you need to do is cut the zip-tie that holds the two halves together. Peel the bonded wire apart till you get enough length, then you can tie them back with a new zip-tie.



by:
2011 Jeep Grand Cherokee

Found your website and thought it was awesome. Boy was i wrong. I ordered a wiring harness for my 2011 Jeep Grand Cherokee. Watched the video and it seems very simple and well thought out. Paid 25 dollars extra for overnight shipping so i could leave town for the weekend. Evidently Tekonsha ( supplier) doesnt know how to measure because the harness is too short. Customer service is a joke. She says someone may call me tomorrow. What good does that do. Im stuck and cant do the work i promised. Thanks etrailer. You suck.

Etrailer Expert

Laura E.

9/19/2017

Richard, if you snip one of the zip ties where the yellow and green wires meet, you can make the wiring just about as long as you need.



by:
2007 Jeep Grand-Cherokee

This was really easy to install, especially if you watch the video before installing. I chose to follow wiring that was already going across above the spare tire and tie wrapped to it. It tucks neatly away and I had plenty of wire. I do recommend cutting one of the existing ties to allow more cable.

Mike

1/23/2018

Product has been great no issues to date!



by:
2011 Jeep Grand Cherokee

It works grate very easy to hook up grate instructions I would recommend this product to anyone who needed a trailer hook up wire set. Order arrived ontime.very ?? happy with this product

David F.

5/30/2017

Grate no problems


25
363
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Trailer Hitch for 2007 Jeep Grand Cherokee SRT8 with Center-Positioned Dual Exhaust
    Yes, the Curt Class I Trailer Hitch Receiver # C11103 is a confirmed fit on the 2007 Jeep Grand Cherokee SRT8 with center-positioned dual exhaust. I confirmed compatibility with Curt's fit guide and also with one of their technicians. The written instructions and a helpful installation article are both linked to assist you. Tools required are listed in the instructions. If you plan to tow you will also need trailer wiring; use part # HM40975-11933 if you have the factory tow package or...
    view full answer...
  • Parts Needed to Install 7-Way Traile Wiring Connector on 2011 Jeep Grand Cherokee
    To install a 7-way on your 2011 Jeep Grand Cherokee that does not have the tow package you'll need to first start with a 4-way like part # 118425. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake controller...
    view full answer...
  • Troubleshooting T1 Trailer Wiring Harness Install that Prevents Vehicle Taillights from Functioning
    The first thing you should check is to make sure you had the connectors firmly seated together. If the connectors weren't totally connected together that would explain the problem. If that doesn't fix the problem I would recommend you inspect the connectors of the harness to make sure there aren't any bent pins or missing pieces that would prevent the circuit from completing. Aside from that it would seem that the harness is at fault and would need to be replaced. I attached an install...
    view full answer...
  • Is There A Video Of The Installation Of A Trailer Hitch And Wiring On A 2007 Jeep Grand Cherokee
    I have a video of the Draw-Tite Class III Hitch, # 75338 being installed on a 2007 Jeep Grand Cherokee. The video shows it being installed on a Jeep without a tow hook, so if your Jeep has a tow hook it would have to be permanently removed which adds 20 to 90 minutes to the installation time. I also have a video of the Tow Ready T-One Wiring Harness, # 118425, being installed on a 2007 Jeep Laredo. Even though the vehicle is different, the procedure will be very similar and you can...
    view full answer...
  • Aftermarket Trailer Hitch and Trailer Wiring Installation on a 2007 Jeep Grand Cherokee
    The trailer hitches we sell for your 2007 Jeep Grand Cherokee do not require that the rear bumper be removed but the rear fascia does need to be detached so it can be moved out of the way to make room for hitch installation. If your Grand Cherokee has the factory tow hook, it must be permanently removed. To do so, you would have to temporarily remove the rear fascia and a plastic bumper support. The fascia and support get reinstalled near the end of the installation. I have included a...
    view full answer...
  • Parts Needed to Add a Brake Controller on a 2013 Jeep Grand Cherokee With or Without the Tow Package
    Since you don't have the trailer towing package on your 2013 Jeep Grand Cherokee you do need to start off by installing a 4-Way connector. I recommend the Tekonsha T-One # 118425 as we have found Tekonsha to be one of the most reliable wiring companies that we carry. To have 7-Way and 4-Way connectors on your Jeep you also need the Universal Wiring Kit # ETBC7. This connects to the T-One and give you both connections that you need. It also includes everything you need for the 7-Way to...
    view full answer...
    Image 1 for
  • 2008 Grand Cherokee 4-Way and 7-Way Recommendation
    You would need to first start with a 4-way for your 2008 Jeep Grand Cherokee. For that you would need the part # 118425. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need a brake controller and the # ETBC7 instead of the # 37185. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake controller I would recommend the...
    view full answer...
  • Trailer Wiring Recommendation for a 2007 Jeep Grand Cherokee without Tow Package
    For trailer wiring for your 2007 Jeep Grand Cherokee you would want the Tow Ready Wiring Harness part # 118425 which is a confirmed fit. It does not require a taillight converter since the taillight circuits of your vehicle match what the trailer wiring standards are. Meaning the turn signals and the brake signals are carried on the same circuit. I attached an install video for this harness for you to check out as well.
    view full answer...
  • Comparing Curt and Tow Ready Trailer Wiring for a 2013 Jeep Grand Cherokee without Tow Package
    Both the Tow Ready harness # 118425 and the Curt harness # C56009 install and function the same way on your 2013 Jeep Grand Cherokee without the factory tow package. They are just from 2 different manufacturers. I have linked videos showing example installations of both for you. I usually recommend Tow Ready over Curt because on harnesses with converter boxes the Tow Ready ones seem to be the more reliable option. But in this case there are no converter boxes so you could go either way...
    view full answer...
  • Installing the Prodigy P2 Brake Controller on a 2011 Jeep Grand Cherokee
    If your 2011 Jeep Grand Cherokee already has a fully functional 7-Way wiring harness at the rear bumper, and all you are needing is the harness that connects the Prodigy P2 # 90885 to the connection under the driver's side dash on your Jeep, then you will need part # TK93VR. If you need a wiring harness at the rear bumper of your Grand Cherokee then I recommend using the T-One Vehicle Wiring Harness, part # 118425, along with the Universal Installation Kit, part # ETBC7. This setup will...
    view full answer...
  • Tow Ready Custom Fit Vehicle Wiring Harness for 2014 Jeep Grand Cherokee
    My contact at TowReady advises that harness # 118425 will not work on the 2014 model year due to the new tail lights but suitable harness options can be seen on the linked page. All are intended for vehicles that have the factory tow package. You can choose 4-pole or 5-pole flat type connectors or a round RV-style 7-way/4-pole combination like # HM40975 which is illustrated in the linked video.
    view full answer...
  • Curt and Draw Tite Hitch Comparison and Recommendation for a 2013 Jeep Grand Cherokee
    The biggest visual differences between the two hitches are what you mentioned. The Curt # C13182 has a visible crosstube that is round whereas the Draw Tite # 75699 has a square crosstube that isn't in plain sight. If it were me I would go with the Draw Tite for that reason. The Curt may have a higher tongue weight capacity, but your towing capacity is only as strong as the weakest component and it is very unlikely your vehicle has a higher tongue weight capacity than 500 lbs. If you...
    view full answer...
  • Recommendation for Ball Mount and Hitch Ball for 2011 Jeep Grand Cherokee to Tow Utility Trailers
    To tow a trailer with your 2011 Jeep Grand Cherokee you will also need a ball mount, hitch pin and clip, hitch ball, and wiring harness. Based on my research, the Draw-Tite Trailer Hitch on your Grand Cherokee is a 2 inch Class III trailer hitch, # 75699. To provide you with a great starter kit for towing, I recommend the etrailer.com Ball Mount Kit for 2 Inch Hitches # 989900. This kit includes 2 ball mounts (one with a 3/4 inch rise or 2 inch drop and the other with a 2-3/4 inch rise...
    view full answer...
  • Trailer Brake Controller Installation on 2000 Chevy S-10
    Your 2000 Chevy S-10 is not prewired for a brake controller, but that's not a huge deal. The hardwire installation is actually pretty simple. To begin with, you'll need a functional 4 pin trailer connector. If you don't have one already, you can easily install one using part # 118425 which installs inline at the connection between the vehicle's taillight wiring harness and taillight assemblies. For a brake controller, I'm not a huge fan of the Voyager brake controller. Don't get me wrong,...
    view full answer...
  • Setting Up 2002 Toyota Tundra for Tandem Axle Trailer With Brakes
    In order to actuate your trailer brakes, you'll need to add a brake controller and a 7-way trailer connector. A 4 pin connector provides circuits for the taillights, not not brakes. To begin, you'll need a functional 4 pin trailer connector. If yours isn't working, you can replace it with part # 118425. Next, you'll need a brake controller. I'd recommend going with a proportional style controller like the Tekonsha Primus, part # TK90160 for safer, more effective and more predictable braking....
    view full answer...
  • Recommended Trailer Hitch And Trailer Wiring For 2013 Jeep Grand Cherokee
    The 2012 Jeep Liberty and the 2013 Jeep Grand Cherokee do not have trailer wiring harnesses or trailer hitches that work on both models. We do offer wiring and hitches for both models. For your 2013 Grand Cherokee I recommend the Draw-Tite Trailer Hitch Receiver, part # 75699. This is a Class lll trailer hitch and it has a 2 inch receiver opening. I have attached a link to an installation video for this hitch on a 2013 Grand Cherokee you can check out. If you plan on doing some towing...
    view full answer...
  • Does 2013 Jeep Grand Cherokee Need Re-Flashed After 7- and 4-Pole Trailer Connector Socket Install
    In regards to the 7- and 4-Pole Trailer Connector Socket part # HM40975 which is a fit for a 2013 Jeep Grand Cherokee, it's just simply a trailer connector that plugs into an existing port on the vehicle. If the pins inside the connector are not active once you plug it in, I would first be sure to check the towing fuses for the vehicle in the engine bay fuse box which I have listed for you below. J03 - 30 Amp Pink - Trailer Tow J14 - 20 Amp Blue - Trailer Tow Lamps/Park Lamps If the fuses...
    view full answer...
  • How Does Tow Ready T-Connector Harness 118425 Install on a 2009 Jeep Grand Cherokee
    This harness connects to the connectors on the back side of the tail lights. I have added a link to the instructions below as well as a video of this kit being installed on a 2007 model. They should give you a pretty clear idea as to how the harness installs.
    view full answer...
  • Troubleshooting 7-Way Install on a 2012 Jeep Grand Cherokee that Blinkers Dont Work
    What you can do is test the pins of the wiring harness that you plugged the # 20119 into on your 2012 Jeep Grand Cherokee with a circuit tester like part # PTW2993 to test for voltage when the turn signals are on. If you can't find any pins on the connector that show intermittent voltage when the blinkers are on then it most likely is a programming issue you would need to take the vehicle to a Jeep dealer for.
    view full answer...
  • Will Draw-Tite Trailer Hitch # 75338 Fit a 2009 Jeep Grand Cherokee Rocky Mountain Edition
    The Draw-Tite Trailer Hitch, # 75338, is designed to fit all models of the 2009 Jeep Grand Cherokee except for the SRT8 models. The hitch installs around the rear bumper beam, so the full size spare that is part of the Rock Mountain Edition should not be a factor. I have included a link to the installation instructions and a link to a video showing a typical installation for you. If you are planning on doing some towing, I recommend etrailer Ball Mount Kit, # 989900, which comes with 2...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2012 Jeep Grand Cherokee
    For a hitch for your 2012 Jeep Grand Cherokee the Draw Tite hitch part # 75699 that you referenced would be exactly what you would need. To install a 4-way all you need is the part # 118425. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install...
    view full answer...
  • Does 2011 Jeep Grand Cherokee Hopkins Brake Controller Installation Require Separate Switch
    If your 2011 Jeep Grand Cherokee has a factory installed 7-way trailer socket at the back bumper then you will want to order the Hopkins Agility Trailer Brake Controller along with its matching quick-connect adapter. The part number for the controller itself is # HM47294; the adapter is # HM53035. If your Grand Cherokee does NOT have a factory 7-way then instead of the adapter you'll need to order the controller unit # HM47297 and a brake controller install kit, part # ETBC7, which inckudes...
    view full answer...
  • Are Fuses Needed on a 2011 Jeep Grand Cherokee to Activate the Factory Tow Package Trailer Wiring
    If your 2011 Jeep Grand Cherokee has the Tow Package installed from the factory but there is no 7-Way or 4-Way connector at the rear of the vehicle, see photos in instructions link, you can add the 4-Way connector, item # 118384, in line with the factory 7-way connector, located behind the rear bumper on the driver's side. To get all of the taillight functions to work properly you would then need to go to the dealer and have them program the computer to activate the brake and turn signal...
    view full answer...
  • What is Blue Wire Under the Dash For On a 2008 Jeep Cherokee Laredo When Installing Brake Controller
    On your 2008 Jeep Grand Cherokee the Blue wire you have found may or may not run all the way to the rear of the vehicle. The wires needed to install a brake controller on your vehicle are not always available and sometimes if the wires are available they are not easy to find. The easiest way to install a brake controller to your 2008 Jeep Grand Cherokee is with the Brake Controller 7 and 4 Way Installation Kit, part # ETBC7. It does require a 4-way trailer connector like the Tow Ready...
    view full answer...


< Previous
123. . .6



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Nicholas E
Test Fit:
Nicholas E
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee Chris R
Video by:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.