bing tracking image
  1. Vehicle Suspension
  2. Ram
  3. 1500
  4. 2016
  5. Timbren
FITS 2016 Ram 1500
Timbren Rear Suspension Enhancement System

Timbren Rear Suspension Enhancement System

Item # TDR1500DQ
Retail:$316.90
Our Price: $269.36
You Save: $47.54
Vehicle Suspension
Confirmed to Fit
2016 Ram 1500

2 Wheel Drive

4 Wheel Drive

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Timbren vehicle suspension for your 2016 Ram 1500 are available from etrailer.com. Installation instructions and reviews for your Ram vehicle suspension. Expert service, and great vehicle suspension prices. etrailer.com carries a complete line of Timbren products. Order your Timbren Rear Suspension Enhancement System part number TDR1500DQ online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (6079)
  • Q & A (0)
  • Photos

2016 Ram 1500 - Timbren Rear Suspension Enhancement System

  • Rear Axle Suspension Enhancement
  • Jounce-Style Springs
  • Extra Heavy Duty
  • Timbren

8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your Ram 1500. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.


Features:

  • Improves suspension, handling and safety
  • Provides additional support as needed, so you always get a smooth, comfortable ride
    • Allows the leaf spring ample movement and cushions light loads
    • Becomes more rigid as more weight is added
      • Increases stability - gives you great performance when you are hauling heavy loads
      • Reduces vehicle sag
  • Works independently - side to side
    • Helps to compensate for off-center loads
    • Reduces body roll when you have to swerve or execute a sharp turn
  • Acts as shock absorber, taking the brunt of bumps and rough roads
    • Extends the life of your vehicle's suspension


Specs:

  • Includes 2 Aeon hollow rubber springs, vehicle-specific brackets and hardware for simple installation
    • Replaces axle bump stops on frame
    • No drilling required
  • Capacity: 8,600 lbs
    • Do not exceed your vehicle's weight-carrying capacity
  • Designed to work with a suspension system that is in good working order
  • Limited lifetime warranty - satisfaction guaranteed


An example of sag on a vehicle's rear axle under a heavy load

Whether you're hauling heavy loads in your bed or cargo area or you're towing a trailer, you will often see the rear of your vehicle sag while the front end rises. In these cases, the rear axle is handling not only the weight of the cargo, but also more of the vehicle's weight. Because less weight is on the front axle, the front tires are making less contact with the road. Overall handling - traction, steering, and braking - is negatively affected. But the resistance from Timbren's Suspension Enhancement System works with your factory suspension to keep your vehicle level and improve your driving experience.


Diagram of the Timbren spring installed

The Timbren system comes with custom-fit brackets that are bolted onto each frame rail above the rear axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits, 1" above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride that you are used to.


Animation of a standard Timbren rubber spring

Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape increases resistance, stiffening the suspension and keeping your vehicle level.


Timbren suspension system works to prevent body roll

Each hollow rubber spring works independently to support the driver's side or passenger's side of your vehicle. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when you are hauling off-center loads.


An example of a trailers swaying

Because the vehicle handles better with the springs, less turbulence will be passed along to the trailer, and this helps to keep the trailer in line. Your driving comfort is further enhanced if the trailer does begin to sway (from a gust of wind or a passing semi), because the movement from the trailer is not transferred to your vehicle. This also works to make the sway subside more quickly.


An empty truck on a bumpy road without Timbren

Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on the factory suspension is also lessened because the rubber springs work to prevent bottoming out on rough roads.


Timbren Suspension Enhancement Compared to the Competition

Timbren's Suspension Enhancement Systems are much easier to install than air springs - there are no air hoses to run, no compressors or gauges to hook up, and no manual adjustments to make. The rubber construction makes Timbren's springs more elastic than similar products constructed of microcellular urethane. And more elasticity allows for a more comfortable ride because the rubber has more travel.



DR1500DQ - Rear Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren

Installation Details TDR1500DQ Installation instructions

Customer Satisfaction Score:


Customer Reviews

Timbren Rear Suspension Enhancement System - TDR1500DQ

Average Customer Rating:  4.7 out of 5 stars   (6079 Customer Reviews)

8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

by:
2012 Dodge Ram Pickup

I have attached the Timbren product to my 2012 Dodge Ram and am very impressed with the product. etrailer answered my question that I needed to know if the Timbren product would take the squat out of my truck when I hook up my 5th wheel rv. The proof is in the attached pictures I took to share with you and potential customers. Your customer service & product knowledge is outstanding and that is why I am a faithful customer. As far as the installation of the product, I could not find an easier thing to do....It's harder to change a light bulb! Of course your installation video was very informative which made things a lot easier.

James T.

6/14/2013

Helped make my decision a no brainer....thanks for the pics they sealed the deal.

Ron L.

5/10/2014

Fantastic....The truck drives like a dream! If and when I hit any potholes or bumps, of course you still feel them, but the control is there with no fish tailing. As far as pulling my 5th wheel, it feels like everything is one unit and floats right along!

Mike L.

12/28/2014

thanks Ron. Great information and you helped me with my decision.

John T.

5/9/2015

Very good illustration and explanation. I have a 5th wheel and am experiencing the squat problem. Question: Is the installation strictly a friction fit or do I have to install a bolt with nut?

Tony O.

5/27/2015

For John T. They are a friction fit, installed mine in less than 15 min. Slight harder ride when unloaded, but they work perfectly for carrying the load of the trailer. Highly recommend.



by:

I was a sagging mess intil I had the Timbren Rear Suspension added. Now my back end stands tall to the hitch weight of our trailer. These little things really make a big difference.



by:
Dodge Ram Pickup

Needed to level out the ride when towing an RV with my Ram 1500. The Timbren enhancement system worked perfectly to keep the Ram at an even height front to back rather than the rear pushed down and the nose up when the RV was attached. Also keeping the RV level improved towing handling.

Mark

1/11/2024

After 1 year I can report back that this system has continued to provide the needed improvement to the suspension. I am not seeing the materials deteriorate or break down in any way.



by:
2019 Dodge Ram Pickup

Towing 25ft camper with 2019 Ram 1500 4x4, very stable ride.
No sag even without weight distribution hihch.



by:
2017 Ram1500

Purchased to help my suspension when pulling around my 2 horse BP trailer. Tested them out the day I installed them with a 16' dump trailer (which is too much trailer for my 1/2 ton). Took a 20 mile ride on the highway and some in rough shape back county roads (to test the ride and to make sure I seated the Timbren in securely). I am super impressed. They preformed as advertised and my truck sits level. The ride is much better with the load and I love how it doesn't affect my ride when not loaded.

I change my own oil and headlights but that is about as far as my mechanic skills go. They were super easy to install. It took me more time to take the tire on and off than to remove and install these. I watched an installation video, used two small blocks of wood to seat them, probably 30 minutes of my time. Would definitely recommend this product.



by:

I have purchased Timbrens before and they do the job. Thank you



by:
2013 Dodge Ram Pickup

These "enhanced" bump-stops have definitely improved the ride quality of my 2013 Ram 1500 quad cab when pulling our 7500 lb. 29 foot travel trailer. The trailer probably has 500+ pounds of food, clothes, kids toys, etc inside as well. The truck bed probably has another 800'ish pounds of equipment in it that compresses the suspension before I even hook the trailer up. With the stock stops the rear suspension hardly moved. After adding the new stops, the rear suspension had travel again and the steering felt less twitchy.

Unloaded truck will hit the new stops only if I hit a pretty harsh bump but it's only noticeable if you're paying attention to it. With a loaded bed (no trailer) hitting the stops is more noticeable but you still need to hit a decent bump for them to touch.

They are very easy to install. Take the time to read the instructions and watch the installation video before you pay someone $50-$75 for a 15-20 minute job.

I would buy them again.

John

3/11/2019

The bump-stops have been excellent. Absolutely worth the money.



by:
2017 Ram1500

Actually got these for insurance. I put a full air suspension under my Ram to get a little raised stance. My only fear of that would be an air line failure. If that were to ever happen, these would only allow less than 2" of drop instead of about 5. Love my setup.



by:
2022 Ram1500

Have used these before on a previous vehicle. E Trailer has the best price and the install videos are also helpful



by:
Dodge Ram Pickup

I put these on my 14' Ram 1500 that has Mopar 2.5'' lift system. It took me longer to crawl under the truck than it did to pull off stock bump stops and install the rubber shocks. A little bit of soapy water and they slid right on. No need to jack up truck or use of any tools. Pulled 16' bumper pull stock trailer loaded down the same day and was very pleased with the elimination of bounce from the rear. Rams have coils in the rear that make the truck drive like a dream empty, but bouncy as heck pulling a trailer. I recommend this product to anyone with a Ram. Boots sit about 1.5'' above axel so still get same smooth ride when empty and support when you put on a load.

Ram S.

7/7/2017

Still holding strong on my 1500. I have enjoyed the system so much I will be ordering one for my 2017 Ram 2500



by:

Delivery was fast and installation was fast



by:

Love them had coil bags before one blew out going down the interstate a state away from home ...timbren good coil bag bad highly recommend the Timbren bump stops

Joe

7/18/2023

Great ...love the timbren bump stops...would recommend them to everyone towing with a 1500



by:

The fork lift operator couldn't reach far enough to center them over my axle, but it didn't matter, because I installed air lift air springs and the Timbren bump stop spring enhancements. I can't believe how well they performed together. It was only a short trip with this load, and I'd never haul this heavy of a payload in a 1500 unless it was a short trip, but it wouldn't have been an option without these enhancements. The fork lift driver was even impressed. He asked me what I was using. These products kick serious ass! AMAZING!



by:
2013 Suzuki Swift

Purchased these after researching and reading reviews about how these helped others with the same problem I had. They came quickly and were very easy to install. Took less than 30 minutes. The rear end of our 2013 Dodge would sink when we hooked up our Ultra Light trailer. It has a 2" lift on the front. After installing the Timbren Rear Suspension Enhancement System things seemed to level out and we will see how much better it rides this weekend! Customer service was great. Contact about shipping and receiving was swift and easy. Thanks. Pictures attached show the spacing on the rear tire/wheel well before and after. Sturdy strong product. Thank you.



by:
2011 Dodge Ram Pickup

I’m posting review of how the installation went. The installation is so easy, all you need is a jack and 2 short 2x4 boards(for compressing the Timbrens evenly into the socket). I have a 2011 Dodge Ram 4.7l. Pictures below shows my original where rotted and crumbled as soon as I touched them. My truck without from the ground to top of rear fender sits at 38 inches, after my trailer load out on it goes down to just a tad below 37 inches. Major difference, before it would go beyond 35 inches or below.
Pictures #1 show the original yellow rotted ones
Picture #2 is the tinbren installed.



by:
2011 Dodge Ram Pickup

A heavy workload on a Ram 1500 will cause the truck to squat with just 1 inch of clearance in the wheel-well. The stock suspension is soft and it feels precarious when under load.

I would not say that Ram dropped the ball on their suspension since many of their 1500 customers do not load the truck down to use it to its rated capacity and the soft ride appeals to a large segment of drivers who cannot find it in other trucks. However, it seems that the Timbren bump stops are what should be on the truck if you are not getting a 2500 or 3500 but need to tow and haul.

The Timbren rear enhancement system immediately improves the handling on the Ram 1500 and stands up even when placing it under load. It is almost like buying a whole new truck. I cannot compliment this product enough and I am extremely pleased with how the truck handles both loaded and unloaded. It is not too stiff and it does not feel bumpy like other enhancements might. But it feels sturdy and the truck feels stronger almost right away.

I could have gone with a different distributor for these parts but etrailer.com is more than just a distributor. You can find official etrailer.com videos on most of their products which will give you honest information on their products and explain how to install and use those products. If you have a question, you will get a reply from them with an expert on the subject. They are interested in finding you solutions first and the sales are just a byproduct from their expertise. I did not find these parts cheaper anywhere else, but I still would have gone with etrailer.com even if they cost a little more. I chose etrailer.com because I know I can trust them to get me the good stuff.



by:
2016 Dodge Ram Pickup

To say I'm very happy with this product is an understatement. First off, shipping was fast and the communication from George was top notch. Secondly, installation was as easy as it gets. Find a safe, flat area to jack your truck up by the frame (this creates space between the factory bump stops and the axle) then remove the factory bump stops. You may need a flat head screw driver for this to pry the old bumps stops out (easy)...
insert the new Timbren Suspension System...a 6 inch long 2x4 would be helpful here....safely place the 2x4 atop the axle directly under the Timbren system, then slowly lower the vehicle. The weight of the vehicle will force the Timbren system up into the receiving end and this should complete the install.
It took me longer to dig out my floor jack, cut a small piece of 2x4, then installing the Timbren system.
Lastly, I immediately hooked up my camper a 24' (27' all in) Forest River and instantly saw my 2016 RAM leveled out. I have a 3 hr trip planned in the coming weeks and will offer some feedback on the ride with this new Timbren system in place. Pretty impressed thus far



by:

2019 Ram Rebel 4 x 4 Quad Cab
Ordering
was easy and shipment was fast. Although it was a little concerning when I first saw the box. It appeared that baggage handlers at the airport had their hands on it, however the contents were fine. Installation was fast, I used a floor jack and 4x4 under the trailer hitch to lift the truck 3 to 4 inches. It was scary how easy the original bump stops came out. One twist and they were removed. Installation was uneventful (per instructions) there is a decent amount of space under the Rebel which certainly helped. On flat roads I haven't notice any change in ride quality but it is certainly stiffer when going over bumps. I purchased these for aiding in the towing a travel trailer but have not yet used in that capacity.
4 Stars for now and if they work as designed with towing the trailer would give 5 Stars.



by:

Don’t have a good enough idea of if the product will be sufficient for my needs. I’m pulling a 25ft gooseneck trailer to haul my tractor. I’m doing this with a Ram half ton truck and I couldn’t mount airbags as the hitch interferes with there mounting. These were an alternative and I know they are helping but won’t know how much until I do more pulling.



by:

It did exactly what I needed to do. I had really bad chassis roll and soft suspension in the rear of my truck. This eliminated the issue and gave me a stronger ride in the rear.

Casey

11/6/2021

I have been carrying an 80 gallon fuel tank tools and equipment with my pick up. Constant weight on the bump stops. There is some wear between the components of the bump stop but they are still solid.



by:
2019 Ram1500

So far all I can review is the install and super easy I put a floor jack under one side of the frame jacked it up took hardly any effort to pull the original stops out put a little soap and water on it screwed it up in there put a 2 x 4 beneath it drop the suspension down onto the two by four jumped up and down on the rear bumper to make sure it was seated nice and easy to do both sides took me about five minutes of actual work no problem I can't wait to try it out towing these are much higher quality and much larger than the original bump stops I can't believe the factory actually put those in it must be for grocery getters. we plan on using these for planar travel trailer to avoid the bucking bronco effect we have a 2019 Ram 1500 lariat 4 x 4 crew cab with a six-foot-four box



by:
2012 Dodge Ram Pickup

I have installed the Timbren SES on my 2012 Ram 1500. Total time including removal of OEM bumpers was 45 minutes. I added a preliminary step to the installation procedures. I cleaned the receptacle where the OEM bumper was located to remove the dirt and residue. That made the new parts slide into position easily. I used a small wood block as suggested to ensure complete seating of the new bumpers. They fit perfectly. I have approximately 1.25" of clearance between the bumpers and the rest. Can't wait to get my trailer hooked up to see how they perform.
Excellent service as always from etrailer!



by:

Great on a smooth road



by:
2013 Dodge Ram Pickup

Timbren Pads are easy to install but could use a stop line to verify seating, kinda of a guess. Ram 2013 pads don't bolt on they are press fit to frame. The old pads came out very easy and were dried out from weather? No physical changes in height to PU after installation. Clearance went from 3 (original), to 1 1/2. Pulling a 33 ft trailer and wind rocking PU, also have Sumo spring to install later. I pulled bump pad off without jacking up then jacked frame up, installed pads then set PU down several times with 2 x 4 spacer to set pad. Can't wait to try on road with trailer.
Etrailer shipped very quickly, ordered Tuesday afternoon delivered Saturday. Shipped no rush by me.



by:
2018 Dodge Ram Pickup

These timbrens are a much better product than I ever dreamed. I had air bags on previous trucks. These work great. Very little cost and installed in 15 minutes on my 2018 Ram. I watched a video and cut 2 blocks in that time too. I tow a job trailer and this truck had more sag from hitch weight than last truck. Rear coil springs.
Solved that issue.
I'd get them again for sure.


25
3904
Show More Reviews

See what our Experts say about this Timbren Vehicle Suspension

  • What is the Warranty for Timbren Helper Springs TDR1500DQ for a 2011 Ram 1500
    Timbren helper springs # TDR1500DQ have a limited lifetime warranty. I have linked a couple of videos on them for you. One shows the features and the other shows an example installation.
    view full answer...
  • Differences Between Timbren Suspension Enhancement Systems for 2011 Ram 1500 Crew Cab 4x4
    If you are looking for something that will take out the squat at the rear end of the truck when connected to a travel trailer then the best option is weight distribution. But if it is a 5th wheel trailer you will be towing then suspension enhancement would be the way to go. The difference between Timbren systems # TDR1500DQ and # TDRTT1500 subtle. Basically, the one you will want is # TDR1500DQ rated for 6K. The other kit, # TDRTT1500, is designed for service vehicles only like utility...
    view full answer...
  • Will Timbren Rear Suspension Enhancement System Fit on 2013 Dodge Ram 1500?
    The Timbren Rear Suspension Enhancement System, # TDR1500DQ, is a confirmed fit on both the two-wheel-drive and four-wheel-drive versions of the 2013 Dodge Ram 1500, and will work with your vehicle. Coil springs are not an issue with this system, as evidenced by the video I've linked to below, which shows them being installed on a Ram with coil springs. I've also included a link to a video review of this product for you.
    view full answer...
  • Best Rear Suspension Enhancements On A 2011 Dodge Ram 1500
    The maximum payload capacity of your 2011 Dodge Ram 1500 is determined by factory and cannot be increased. However, with the aid of suspension enhancements you can dramatically improve your vechiles stability, steering, and wear life. Choosing the proper replacement/addition to your vehicle will depend on the features you wish to improve or add. I recommend using the SuperCoils Suspension Coils by SuperSprings. The heavy duty springs such as the SuperCoils Custom Suspension Coils part...
    view full answer...
  • Using A Weight Distribution System With Rear Suspension Enhancements
    The best way to reduce vehicle sag and trailer sway would entail the use of a weight distribution system. A weight distribution system works by distributing the weight on the rear axle of the tow vehicle across the entire platform. This will allow for a level towing surface, in turn providing a safe haul. Using a friction bar design, the downward force applied to the trailer's tongue will minimizes trailer sway in one of two ways. The first being to reduce sway as it is happening and the...
    view full answer...
  • Timbren Suspension Enhancement Recommendation for a 2015 Ram 1500
    Yes, I checked with Timbren and the Timbren kit part # TDR1500DQ that you referenced has been confirmed to fit the Crew and Quad Cab models of the 2010-2015 Ram 1500s so it would work well on your 2015 Ram 1500.
    view full answer...
  • Will Replacing Timbrens with Air Bags on a 2017 Ram 1500 Improve Ride Quality
    The Timbren Rear Suspension Enhancement System part # TDR1500DQ that you have on your 2017 Ram 1500 is a great option for heavy duty towing as they offer an enormous amount of support. However, the adverse side effect of this is that they tend to produce a rough ride. In order to give both support and retain ride quality I highly recommend switching to the Air Lift LoadLifter 5000 Air Helper Springs part # AL57365. The reason for this is because they are adjustable which means you can adjust...
    view full answer...
    Image 1 for
  • Timbrens or SumoSprings For 2021 Ram 1500 Classic For Towing Travel Trailer
    For your 2021 Ram 1500 Classic, the better option for your suspension enhancement between the Timbrens and SumoSprings is definitely going to be the SumoSprings, with the correct fit for your truck being the following part number: - SumoSprings Solo Custom Helper Springs # SSR-307-47 The SumoSprings # SSR-307-47 are the better option compared to the Timbren # TDR1500DQ is simply because they are smoother. They both provide the same effective support for your Ram while you are towing,...
    view full answer...
  • Timbren Suspension System That Fits 2020 Ram 1500
    I checked with Timbren just now and for your 2020 Ram 1500 the correct fit is the part # TDR1500DQ. This is a carry over from previous year trucks.
    view full answer...
  • Rear Suspension of 2015 Ram 1500 Squats When Towing Camper
    The Timbren # TDR1500DQ Rear Suspension helper springs would be a decent choice to eliminate some of the sag you experience when towing, but these are best used to support loads carried in the truck bed. To counteract the sag caused by a trailer's tongue weight, a weight distribution system is your best bet. The system you use will depend on the tongue weight of your trailer when it's fully loaded as you would normally tow it. I'll link you to an article that discusses how to determine...
    view full answer...
  • Will the Timbren Rear Suspension Enhancement System Help with Sway on a 2010 Ram 1500
    The correct Timbren Rear Suspension Enhancement System for your 2010 Ram 1500 is part # TDR1500DS if you have a regular cab or part # TDR1500DQ if you do not have a regular cab. They will absolutely help with sway while traveling with a load. They do this by providing a buffer between the axle and frame which will limit the amount of side to side movement that can occur while the springs are engaged. The Timbrens are a very popular upgrade for your truck and are used by many people with...
    view full answer...
  • Recommended Suspension Upgrade for a 2019 Ram 1500 with In-Bed Camper
    The best suspension enhancements we offer for your 2019 Ram 1500 with an in-bed camper in regards to ride quality is going to be hands down the Air Lift LoadLifter 5000 Air Helper Springs part # AL57375. This kit is drill free and it will do wonders to not only help rid the squat but also help to retain ride quality while going over bumps and dips in the road. The advantage that this system has over the Timbren Rear Suspension Enhancement System part # TDR1500DQ that you were looking at...
    view full answer...
  • Best Suspension Enhancement For a 2019 Ram 1500 Classic Pulling a 5,300LB Travel Trailer
    The SuperCoils Custom Suspension Coils # SSC-51 can be used with another suspension system like the Timbren Rear Suspension Enhancement System # TDR1500DQ. The Timbren will not work your 2019 Ram 1500 if it is a regular cab or has factory air suspension. Since it sounds like you only need the suspension enhancement when you are towing your travel trailer, I recommend using a Equal-i-zer Weight Distribution System # EQ37100ET. With the Equal-i-zer you will be able to level your Ram and...
    view full answer...
  • Determining if Spacers Are Needed with Timbren Springs on 2018 Ram 2500 Power Wagon
    The overall height of the Timbren Rear Springs # TDR2500D (which are confirmed to fit your 2018 Ram 2500) is 5-3/4 inches, including the mounting bracket. If you use the included spacer the height grows to 6-3/4 inches. Timbren recommends having around a 1 inch gap between the spring and the axle for best performance. Since these units simply replace the factory bump stops on your truck, you can measure your existing bump stop (and its distance from the axle) and compare it to the height...
    view full answer...
  • Correct Timbren Rear Suspension Enhancement System for 2022 Ram 1500 Crew Cab 4WD
    Both the Timbren Rear Suspension Enhancement System # TDR1500DS and the # TDR1500DQ are confirmed to fit your 2022 Ram 1500. The main difference between the two is the capacity. The # TDR1500DS has a 6,000 lb capacity while the # TDR1500DQ has an 8,600 lb capacity. Unless you will be towing or hauling all of the time the 6,000 lb capacity of the # TDR1500DS would be the way to go. These also won't impact your unloaded ride quality as much. I have attached a review and installation video...
    view full answer...
  • Solution for Sway with 900 Pound Utility Trailer After Switching to New Truck
    It sounds like you have done just about everything on the trailer to try and reduce the sway you're experiencing when towing with your new 2010 Ram 1500. Adding tongue weight to the trailer and making sure it is level when hooked up are a couple things we usually recommend trying but you have already done this without success. I am not exactly sure why the sway issues only began when switching to the Ram. I'm wondering if maybe it is just a coincidence that the issues began with the new...
    view full answer...
  • Do Timbren SES for 2020 Ram 1500 Void Vehicle Warranty
    In a word, no, the warranty of your 2020 Ram 1500 will not be voided with the use of the Timbren Rear Suspension Enhancement System # TDRTT1500 or # TDR1500DQ. You are protected by what is called the Federal Magnuson-Moss Warranty Act. This act says if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever you have added to your vehicle or its installation actually caused the problem in question. The Timbrens will...
    view full answer...
  • Suspension Enhancement for 2015 Ram 1500 Towing a Fifth Wheel Trailer
    For suspension enhancement on your 2015 Ram 1500, Timbrens # TDR1500DQ will work well to level your ride; they have a capacity of 8,600 lbs which is more than enough for your needs. The Timbrens have been highly praised by our customers, with thousands of reviews giving them close to a 5-star review.
    view full answer...
  • How to Choose the Correct Timbren Rear Suspension Enhancement for a 2019 Ram 1500
    If you have a 2019 Ram 1500 that is the standard pick-up truck, the correct Timbren system is the Timbren Rear Suspension Enhancement System # TDR1500DQ, which were designed for standard trucks. The difference between these and the Timbren System # TDRTT1500 is that the latter is made for service trucks, like a tow truck. The reason for this is the design of the springs; if you take a look at the accompanying photo a customer sent in, you can see they are double convoluted, which means...
    view full answer...
    Image 1 for
  • Will the Timbren SES TDR1500DQ Fit a 2019 Ram 1500 with Factory Air Suspension
    I do have an option for you but the Timbren Rear Suspension Enhancement System part # TDR1500DQ will not fit a 2019 Ram 1500 Limited with the factory air suspension. Unfortunately, we do not currently offer any suspension enhancements for a Ram with factory air suspension. Therefore, the best option we have for you if you need additional support would be with a weight distribution system. In fact, even if you do not need a weight distribution system to reduce sag I would still recommend...
    view full answer...
  • Suspension Enhancement For 2019 Ram 1500 With Softer Ride Than Timbrens
    Timbrens like the # TDR1500DQ provide a nice benefit for helping level your ride, but their hollow rubber design can definitely make things rough. We do have a better option for your 2019 Ram 1500 that will soften your ride, though the 6,000 lb capacity Timbrens won't do that, as you'll still get the more jarring impact due to how the Timbrens are constructed. The best option for your truck is going to be SumoSprings, with the correct fit for your '19 Ram 1500 being the following: -...
    view full answer...
  • Suspension Enhancement for 2013 Dodge Ram 1500 with Mobile Darkroom in Bed
    The Timbren # TDR1500DQ rear suspension enhancement spring system you mention would be ideal for the mobile darkroom on your 2013 Ram. The weight of the darkroom is well within the capacity of the Timbren springs. Timbrens work especially well at minimizing body roll, which will be important given the height of the darkroom. The Timbren springs simply replace the factory suspension bump stops, which are simply a compression fit. The installation will only take a few minutes. You can see...
    view full answer...
    Image 1 for
  • Will Timbren Suspension Enhancement System Fit a 2013 Dodge Ram 1500 with Coil Springs
    The pictures in the instructions and throughout the product page for Timbren springs # TDRTT1500 are generic and not meant to convey the actual vehicle the springs fit on. They will fit your 2013 Dodge Ram if it is a 1500 crew cab with coil springs. However, these springs are meant for service vehicles like dump trucks, fire trucks, and so on. If you do not have a service vehicle use # TDR1500DQ. I have linked a video showing a typical installation on a truck that does have the coil spring...
    view full answer...
  • Will Timbren Helper Springs Level Out Sagging 2011 Ram 1500 Towing Trailer with Weight Distribution
    When sag is caused by a trailer then the best solution to fix that issue is weight distribution. But you have to have a system that is rated for the total tongue weight of the trailer and it may need some fine tuning to get the truck to ride level. Total tongue weight is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. If underrated for the trailer the system will...
    view full answer...
    Image 1 for


< Previous
123. . .10



Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Tyler C
Written by:
Tyler C
Employee Rick A
Test Fit:
Rick A
Employee Shane T
Test Fit:
Shane T
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Adam E
Test Fit:
Adam E
Employee Clayton O
Test Fit:
Clayton O
Employee Patrick B
Video by:
Patrick B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Cole B
Installed by:
Cole B
Employee Brent H
Installed by:
Brent H
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Michael B
Updated by:
Michael B
Employee Noah M
Updated by:
Noah M
Employee Carrie F
Updated by:
Carrie F
Employee Bethann B
Updated by:
Bethann B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924