Correct Timbren Rear Suspension Enhancement System for 2022 Ram 1500 Crew Cab 4WD

Question

Question:

Need to know what model Timbren SES to buy for my 2022 RAM 1500 4 wheel drive crew cab. Your site lists different mode than comes up on Timbren site. They show DR1500DQ and your site says TDR1500DS.

asked by: Dan T

0

Expert Reply:

Both the Timbren Rear Suspension Enhancement System # TDR1500DS and the # TDR1500DQ are confirmed to fit your 2022 Ram 1500. The main difference between the two is the capacity. The # TDR1500DS has a 6,000 lb capacity while the # TDR1500DQ has an 8,600 lb capacity. Unless you will be towing or hauling all of the time the 6,000 lb capacity of the # TDR1500DS would be the way to go. These also won't impact your unloaded ride quality as much.

I have attached a review and installation video for your reference.

expert reply by: Robin H

0

Answer 1

I went out to our warehouse to take a look at the Timbren Rear Suspension Enhancement System #TDR1500DS and measured an overall height on the springs of right at 6-1/4 inches. I have attached an image to assist. These particular springs are designed…

view full answer...

Answer 2

For your new body style 2019 Ram 1500 Crew Cab 4WD with the 5.7L V8 you would want to go with the Timbren Rear Suspension Enhancement System #TDR1500DQ as the #TDR1500DS you were looking at is only designed for regular cab trucks. These helper…

view full answer...

Answer 3

Both the Timbren Rear Suspension Enhancement System #TDR1500DS and #TDR1500DQ that you referenced are designed to fit the 2011 Ram 1500, but there are a couple differences that may factor into which set will work for your specific model Ram and…

view full answer...

Answer 4

The correct Timbren suspension enhancement fit for your 2022 Ram 1500 will actually depend on the cab style of your truck. The Crew Cab and Quad Cab are different fits than the Regular Cab, so you'll want to choose the right one based on that: -…

view full answer...

Answer 5

Yes, they sure do; I verified with Timbren that their suspension enhancement do fit the 2022 Ram 1500 with the new body style. The only thing they will not fit is if your '22 Ram has the factory air suspension (auto-air leveling). Also, keep in…

view full answer...

Answer 6

I can absolutely help with the rear sag issue you are experiencing. I recommend adding the Timbren Rear Suspension Enhancement System #TDR1500DS. This simply changes out your factory jounce springs (bump stops) and will sit above the rear axle to…

view full answer...

Answer 7

The lighter duty Timbren kit for your 2016 Ram 1500 part #TDR1500DS is the way to go. It gives you the support you are wanting but since it's not as high capacity as the other kits the ride quality will be smoother.

view full answer...

Answer 8

Your camper that weighs 6,000 lbs is going to have a tongue weight figure of 600-900 lbs so based on that I would go with a lighter duty Timbren part #TDR1500DS which has the 6,000 lb rating. The problem with the higher capacity Timbrens is that they…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...