EZ Connector Magnetic 14-Pin Trailer Connector with 6' Cable and Watertight Seal - Trailer End

EZ Connector Trailer Wiring - 319-S14-07-6

Use this 14-pin connector to connect your trailer to your vehicle to power the trailer's brakes and lights. Built-in magnet creates secure connection with an EZ Connector vehicle-end socket (sold separately). O-rings create a watertight seal.

Features:

• Trailer-end connector allows you to connect your trailer to your vehicle to power your trailer's brakes and signal lights
• 14-Pin connector provides basic 7-way functions plus 7 spare functions to fit your application
  • Great for industrial and agricultural use, as well as connecting wiring from a snowplow or backup camera
• Powerful magnet in plug joins with magnet in EZ Connector vehicle-end socket (sold separately) to keep connection secure
  • Plugs stay tightly connected, despite the bumps and vibrations common with towing
• Face-to-face electrical contacts - no pins or blades to bend or break
  • Eliminates concerns about electrical arcing and abraded pins
  • Contacts are easy to clean when necessary
• Ideal for marine applications
  • Double O-ring on plug creates watertight seal with socket to keep out moisture and debris
  • Water-block powder in cable keeps moisture away from wiring
• Thumb notch on plug allows for easy alignment
  • Twist plug until tabs line up and connector snaps into place
• Plug holder keeps plug contacts clean and protected
  • Secure plug in magnetic receptacle while not in use
• Simple installation
  • Hardwires to existing wiring with included connectors
• Made in the USA

Specs:

• Cable length: 6'
• Wire gauge: 16
• Limited lifetime warranty

This trailer-end connector gives you the functionality of a 7-way, plus 7 additional circuits, but without any pins or blades to bend or break. It's designed to work with a matching 14-pin EZ Connector socket (sold separately) to create a secure, watertight connection that lasts. Strong magnets in both the plug and socket keep the connection tight and secure, even when you're driving on rough terrain. Built-in O-rings create a seal to keep out water and debris. And spring-loaded, face-to-face electrical contacts are long-lasting and easy to clean. These factors combine for a strong, durable connection that's easy to use and to maintain.

Magnetic Plugs Stay Connected

The EZ Connector system uses magnets inside the plug and socket to hold the connectors together. Simply insert this trailer-end plug into the vehicle-end socket (sold separately) and the internal magnets will snap them together, no latch needed. To disconnect, just pull the plug out by hand.

This is an improvement over typical trailer connectors, which rely on a plastic latch on the socket lid to hold the trailer plug in place. With any trailer connector it can be easy to forget to disconnect the wiring when you unhook your trailer. If you drive off without disconnecting a standard plug, the connector will get pulled out of the socket, likely tearing off the lid. Without a lid, the electrical terminals are exposed to damaging moisture and debris. But if you forget to remove the EZ Connector plug when unhooking your trailer, the plug will disconnect from the receptacle as you drive off. And because there's no latch on the socket's lid to get in the way, the lid will automatically close to cover the terminals.

The magnet inside of this trailer connector is made of neodymium, an extra-strong, rare-earth alloy. This high-quality magnet ensures a tight connection between the connectors that is stable enough to make it through intense bumps and road vibration.

Silicon O-Rings Create Watertight Seal

This trailer plug has a double silicon O-ring that creates a watertight seal when it's inserted into the connector.

A storage holder is included to keep the plug safe and dry when it's not in use. This holder conveniently attaches to your trailer so that it is always available when you need it. Simply plug in the connector, and the plug's O-rings will create a watertight seal with the holder, just as they do with the vehicle-end socket. This ensures that the terminals on this trailer-end plug stay protected from moisture and debris at all times.

All of the EZ Connector systems have earned a perfect score on the SAE water submersion test. This means that the seal created on this plug, with the EZ Connector vehicle-end socket, will stay watertight, even if the connector is completely submerged in water for extended periods of time.

No Pins or Blades to Bend or Break

This EZ Connector plug has spring-loaded, face-to-face electrical contacts instead of pins or blades. Pins and blades can bend, corrode, and even break off, which can lead to a permanently damaged connection. With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on this connector that can trap debris. And if any dirt or debris does collect on the terminals of either end of an EZ Connector setup, it can be quickly and easily wiped away. No more scraping pins to get grime off. The result of all of this is a quality, effective connection every time you plug in.

S14-07-6 Easy Connector 14-Pin Trailer Connector with Cable - Trailer Side - 72" Long