17-1/2" x 6-3/4" Stud-piloted wheel has a 6.5" diameter pilot hole. ±6.19" Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup. Rust-resistant 3-step powder coat. Valve stem is included.
Features:
Specs:
Built-In Offset for Dual Applications
This wheel is designed to be used in dual-wheel setups. The 6.1" offset allows the wheel to be positioned closer to the trailer frame when used as the inner wheel of the setup. And if you use this wheel in the outer position, the offset ensures that it will sit closer to the outside of your trailer.
This stud-piloted (Budd-type) wheel centers on the studs instead of the hub. This requires the use of inner and outer lug nuts (sold separately). The nuts should be threaded correctly for the left and right sides of your trailer.
Corrosion-Resistant Finish
The steel wheel goes through a 3-step finishing process that makes it both attractive and corrosion resistant. The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and finished on both sides with baked-on DuPont powder paint.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Task Master 17 and half inch by six and three quarter inch white steel dual wheel, with the 10 on eight three quarter inch bolt pattern. Now this is a heavy duty steel wheel. It is designed for use on dually trucks, buses, and trailers. It is a steel wheel, has the two handhold design.
You can see right here, one on each side. It is very sturdy and corrosion resistant. Now this wheel does have a high offset design which allows the wheel to be used as either an inner wheel in this position, or if you turn it around is an outer wheel on a dual wheel setup. The offset that this wheel has is a positive or negative depending on how the wheels use of 6.19 inches. The wheel does have a three step finishing process which includes a zinc phosphate bath, then an eco primer, and then a nice white powder coat on both sides of the wheel.
The center disportion right here, it is spun form from a fine grain steel and it is welded into place for strength and durability. Now this wheel is a stud piloted also known as a bud type wheel which will center on the studs instead of the hub. And because of that it'll require the use of inner and outer lug nuts for installation. Those we do sell separately. They are listed on this product page as a related product.
And the nuts should be threaded correctly cause they come in a left and a right side nut for your trailer or truck. Do you notice it does include this nice metal valve stem right here, which is included installed onto the wheel. And this wheel does meet the SAEJ 1204 standards. Few dimensions. Again, if we measure the diameter on this it's 17 and a half inches.
The width is measured inside the inside right here. So from here to here, it's gonna be right at six and three quarter inches. The bolt pattern, if you wanna measure the bolt pattern's pretty simple cause you have an even number of lugs. In this case, 10. So the lug holds go directly across from each other. So all you have to do is measure from the center of one lug hole to the center of the opposite lug hole. On this one it would measure eight and three quarter inches. So it's a 10 lug, eight and three quarter inch bolt pattern. Now the pilot hole, which is this large hole here in the center of the wheel, that's gonna measure 6.5 inches and the weight capacity on this wheel is 6,200 pounds. But that should do it for the review on this Task Master 17 and a half inch by six and three quarter inch wide steel dual wheel with the 10 on eight and three quarter inch bolt pattern..
Average Customer Rating: 4.9 out of 5 stars (100 Customer Reviews)
17-1/2" x 6-3/4" Stud-piloted wheel has a 6.5" diameter pilot hole. ±6.19" Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup. Rust-resistant 3-step powder coat. Valve stem is included.Rims look great
Perfect fit.
Good service fair price great product
2 out of 4 wheels arrived scratched up. Not too happy considering the money I spent. No bubble wrap or anything in package to protect product just wheels in a thin cardboard box
Outstanding customer service, courteous, fast and reasonably priced. We will definitely be a repeat customer.
Frustrating that these nice wheels come with crummy valve stems. The wheels are rated for 3860lbs. The only way to get there is to use 110 psi tires, which requires a metal valve stem. Would be much better for them to come without valve stems and give us the option on selecting a valve stem during checkout. If nothing else, tell us they come with low pressure stems. I bet there is more than a few people running around at 110 psi with the stock stems.
These wheels did not fit over the hub on 2017 E-450 chassis, which it is supposed to fit. The hole is a few mm too small. They looked like they are reconditioned but can't confirm that.
I was looking for what I thought would be easy to find common replacement wheels for a dual tandem trailer, I was having no luck finding any decently priced wheels locally so I Shopped online and found the E-Trailer website. It was easy to navigate and had good descriptions of the wheels and the prices were half of anything local. They shipped them for free after a specified amount, (gotta love free shipping). The wheels arrived in well packaged packaging and were just as described. My original tires were mounted on the new rims and I was quite surprised that they required hardly just one wheel weight each compared to the original rims that had weights lined up on both sides they were so bad, just goes to show the high quality of manufacturing that e-trailer carries. The only problem now is that the rest of my wheels look really bad in comparison and I'm tempted to replace the other six............................Hmmmm........ Maybe later.
Items and correct quantity arrived quickly as described, great communication with customer service. We will visit the site and have no hesitation to buy from etrailer ! Thank you
Great quality product, your wheels replaced my damaged factory wheels perfect. And your info video made it so easy to pick the right wheels. From start to finish great service thanks for getting my trailer back on the road.
Time to get it was great. quality was g ood.
Wheels were perfect, exactly what we needed. Very fast shipping and excellent communication from customer service.
These wheels look good and seem to be of good quality. They arrived in good time. I purchased these for my 1985 ford class c motorhome .
The price seemed really reasonable. These wheels are 16" to replace the original 16.5" wheels currently on the vehicle. The 16.5" tires, I here, going the way of the dinosaur. I won't be installing these until next spring. The agents I talked with seemed very knowledgeable and courteous.
I bought these wheels for use as spares and for the money I would buy these wheels again. These wheels appear well made with good welds. The only reason that I did not give 5 stars is because the wheels do not have the notch cut out for the valve stem which means that the valve stem rubs against the wheel. I resolved this by removing the valve stems that came with the wheels and installed curved metal stems. These wheels are not as heavy as my factory wheels. Again, my factory wheels I was quoted $200.00 each and this wheel is $xx.xx, so for a spare, you do the math! Etrailer was great to work with.
All in all they appear to be a pretty good wheel especially for the price point. The only reason I didn't give a five star as there were a couple of spots that must have missed in powder coating and were rusty. It wasn't a big deal as I planned on powder coating them black anyway
Fit perfectly
I had priced a rim at a Ford dealership. It was $995.dollars. So I searched online and I found. your site and am very happy with the price of $211. dollars!!!! We will be doing business in the future!! Thank you Jim Downing.
I've only ordered a couple items, the cab lights I ordered at Christmas were back ordered but I waited to long before I ordered them. The service was great it was exactly what they said it would be, Etrailer even called to see if I would be interested in changing lights just to get them here on time.
The wheels I ordered on Friday were delivered on Monday, I have NO issues with Etrailer there honest and dependable
That's alot in this day
Thanks
Dennis H
Poor quality product at a fantastic price. Rims were so poorly fabricated my tire shop was unable to balance them. Great price but not worth the money to send them back. Shipping would have made them almost as expensive as the rims. Would not recommend this product.
After failed attempts to find rims for our flatbed (4.88 bore which is not common apparently) I searched online to find them. We ordered them from etrailer for about 60% of the cost of the rims we purchased from a local merchant (special order and they were wrong; 4.77 bore). It saved us 80 bucks and they were delivered within a few days, ahead of the estimated delivery time. Thank you etrailer :)
I was very PLEASED with first the price of the trailer wheel. I was EXTREEMLY PLEASED with FREE SHIPPING, and MORE than that, with the speed of regular delivery. I have added ETRAILER to my favorites. I will always look here first, when I need something for one of the trailers!!!!!!!!!!!!
WE ARE VERY HAPPY CUSTOMERS!!!!!!!!!!!!
This fit my 10k Dexter axle perfect. The fit and finish are fantastic. Hardest part was taking off a wheel from the trailer to make sure I got the right pilot size hub. May order another to have (2) spares on hand. Fast shipping and awesome customer service.
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.