This 16" x 6" steel trailer wheel has a 6 on 5-1/2 bolt pattern and a 4.25" pilot diameter. Improved torque retention keeps wheel secure when mounted on your axle. Acrylic enamel finish resists damage better than powder coat finishes.
Features:
Specs:
Durable Acrylic Enamel Finish
This wheel has a durable acrylic enamel finish on the front. The finish is applied after the wheel goes through an environmentally safe zinc phosphate pre-treatment and is coated with an e-coat primer layer. Compared to powder coat finishes, this finish resists getting chipped from flying road debris or scraped from hitting a curb for a longer period of time. These acrylic enamel wheels performed for more than 1,000 hours in salt spray tests.
The stud holes on this steel wheel are beveled to ensure that the wheel stays tight against your trailer hub. This also eliminates the need to constantly retorque the lug nuts.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today we're gonna take a look at this Vesper 16 inch by six inch black steel modular trailer wheel with six on five and a half inch bolt pattern. This steel wheel with modular design is sturdy and rust resistant. The black acrylic enamel finish is going to resist chipping and other damage better than powder coat finishes. And this finish is applied after a zinc phosphate pretreatment and covers an e-coat primer layer.
So it has an excellent corrosion resistance with a salt spray rating of more than 1,000 hours. The beveled stud holes are gonna help keep this wheel securely in place on your trailer hub, eliminating the need for constant retightening of the lug nuts. By the way, the wheel stud size is a half an inch by 20 or nine 16ths of an inch by 18. As you can see here, the valve stem is included, and this wheel meets SAE J1204 standards, and it has a capacity of 3,640 pounds. Now the rim dimensions, we have our diameter from bead seat to bead seat sitting at 16 inches in diameter, and the width again from bead seat to bead seat we're sitting right at six inches wide.
Now we mentioned that the bolt pattern was six on five and a half inches. And of course that first number in the bolt pattern is the number of our bolt holes. And that second number is the diameter in inches of the circle, on which the bolt holes sit. So to determine the bolt circle diameter on wheels with an even number of bolt holes as we have here, you're just gonna simply measure from the center of one bolt hole to the center of the hole directly across from it. Now the center cap is sold separately, but if you decide to pick one up, you do wanna make sure that it fits the pilot diameter of 4.25 inches.
Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Average Customer Rating: 4.8 out of 5 stars (721 Customer Reviews)
This 16" x 6" steel trailer wheel has a 6 on 5-1/2 bolt pattern and a 4.25" pilot diameter. Improved torque retention keeps wheel secure when mounted on your axle. Acrylic enamel finish resists damage better than powder coat finishes.
Well made and a perfect upgrade for my weekend warrior that was previously equipped with 15" wheels .
Upgrading to 16" wheels made the tire selection much better.
Item arrived 1 day early and in perfect condition! Very pleased with the whole experience! Many people complain that their item was damaged but I know 99% of the time it's the delivery carriers fault, especially when its a heavy item. I give props to etrailer and UPS for taking great
care of my rim! Thank you!
Shipping and delivery top notch, still need to have tire mounted but confident in the product
Heavy duty for a 6-lug wheel, nice welding. Works perfect with the "baby"Sailuns if you want to upgrade your trailer suspension. Lot less of tires "folding over" on turns.
great wheel
Easy navigable website. Was easy to make a choice and order. Speedy delivery also.
Excelent services
Five orders delivered on time with no i ssues!
Order came fast well packed Nice wheels Heavy duty
Great price, fast shipping
Nice quality wheels, good finish. Just what I needed. Paired these with the chrome center caps.
Great price on right product (rims), arrived quickly and worked perfect for my utility trailer.
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.