5th Wheel to Gooseneck Adapter For 2021 Keystone Cougar 29RKS Half-Ton 5th Wheel Trailer

Question

Question:

what 5th wheel to gooseneck fits my 2021 Keystone Cougar 29RKS 5th wheel trailer?

asked by: John T

0

Expert Reply:

Your 2021 Keystone Cougar 29RKS Half-Ton 5th wheel trailer has a Lippert 1621 pin box, so the correct adapter is the following:

- Gen-Y Hitch 5th Wheel to Gooseneck Pin Box # GY58GR

I also wanted to add that if you don't have safety chains, you'll need part # GY49GR.

expert reply by: Kyle S

0

Answer 1

To confirm that the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box #GY58GR is the correct fit for your 2005 Keystone Raptor 3512 5th wheel toy hauler you will need to confirm the pin box on your Raptor. There are 3 ways to confirm the correct pin box.…

view full answer...

Answer 2

Thanks for the picture! That is exactly what I need to confirm what pin box your Forest River Shasta Phoenix 28RB has. I just spoke with my rep at Lippert and you have a 1621 pin box with an 18,000 lbs capacity. You will want the Gen-Y Hitch 5th…

view full answer...

Answer 3

The key to determining the correct replacement pin box for your 2021 Grand Design Solitude 310GKR is to figure out what the bolt pattern is. There will typically be a sticker somewhere on the pin box either indicating the bolt pattern or will have…

view full answer...

Answer 4

Thanks so much for that info, and yes, because your 2022 Forest River Sabre Cobalt 36BHQ has a Lippert 1621 pin box, the Gen-Y Hitch 5th Wheel to Gooseneck is a fit. The correct part number is the following: - Gen-Y Hitch 5th Wheel to Gooseneck Pin…

view full answer...

Answer 5

Thank you for purchasing from etrailer the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP94716-61301. Though I'm not 100 percent sure what you are referring to by "the bracket bolt up to the 1115 Lippert bracket…

view full answer...

Answer 6

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box part #GY58GR is primarily designed for long bed trucks. It's no different than a standard fifth wheel pin box in regards to the size. If you were using a fixed hitch and standard pin box before with…

view full answer...

Answer 7

Since the most your trailer can weigh safely is 15,400 lbs the 21k Gen-Y Gooseneck Adapter part #GY58GR would be more than adequate and would provide the best cushioning so it would be what you'd want.

view full answer...

Answer 8

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Boxes like part #GY58GR is not approved by Lippert no, but that doesn't mean you should not consider this for your trailer as Lippert cannot simply void your frame warranty just by…

view full answer...

Answer 9

Yes, we would just need to know the bolt pattern of your 5th wheel's pin box to determine the correct replacement gooseneck pin box. For example, if you had a 1621 bolt pattern (most common) then you would need the Gen-Y Hitch Shock Absorbing…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

5th Wheel to Gooseneck Adapter For 2021 Keystone Cougar 29RKS Half-Ton 5th Wheel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching