Where Is The GEN-Y Hitch Safety Chain # GY49GR Manufactured?

Question

Question:

WHAT IS THE COUNTRY OF ORIGIN ?

asked by: W C

0

Expert Reply:

The GEN-Y Hitch Safety Chain # GY49GR is made in the USA.

expert reply by: Bud M

0

Answer 1

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY98GR is built to replace a 5th wheel trailer's existing pin box so the dimensions and clearance should be similar to what you already have. If you have a short bed truck you are still going…

view full answer...

Answer 2

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY56FR, you were looking at, is designed to replace a standard pin box. This means dimensionally it will be comparable if not identical to the pin box currently on your Forest River…

view full answer...

Answer 3

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Gen-Y's calculation for pin weight is a safe guess, but isn't the most accurate so the only way you'll get the correct capacity Gen-Y 5th Wheel Pin Box is to fully load the trailer and go to a commercial scale to measure the pin weight.…

view full answer...

Answer 7

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 8

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...

Answer 9

Thanks for the pictures and information! I just heard back from my contact at Lippert and your 2024 Keystone Cougar has a 1621 pinbox. You will need the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY58GR you were looking at. You will also need…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Thanks for the picture! That is exactly what I need to confirm what pin box your Forest River Shasta Phoenix 28RB has. I just spoke with my rep at Lippert and you have a 1621 pin box with an 18,000 lbs capacity. You will want the Gen-Y Hitch 5th…

view full answer...

Answer 12

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Where Is The GEN-Y Hitch Safety Chain # GY49GR Manufactured?

Product Page this Question was Asked From

Continue Researching