Comparing Optronics Aero Pro and Glolight Trailer Tail Lights
Question:
Hey guys! Getting ready to rewire and relight everything on my boat trailer. Is there any noticeable difference between the STL37RB and the STL117RB? I sure would like to have the rear of my trailer look like Becky P got hers to look. She sent in a picture that you were nice enough to show on the bottom of your e page describing STL37RB. Could you tell me the lights she used to get that look, or make your best guess at what lights she used? Thanks for your help. Look forward to ordering all my stuff from you. Talk about one-stop-shopping!
asked by: Steve N
Expert Reply:
There would be a noticeable difference if you had both the Aero Pro light # STL37RB and the Glolight, # STL117RB right next to each other. You would notice that the Glolight seams to actually sort of glow rather than just light up. This is due to the top and bottom bars that light up solid.
Both lights are going to be plenty bright. Light # STL37RB has 23 diodes which will be very bright as you can see in the picture submitted by reviewer Becky P.
She is using tail lights # STL37RB and # STL36RB on the far left and right sides of the trailer. Then the next set of lights in are thin light bars, like # MCL70RB.
As for the center light I am not sure which light she may be using. It looks to be an oval clearance light # MCL31RB wired into the tail light circuit.
Products Referenced in This Question
Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Oval - Red Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Oval
- Surface Mount
- Non-Submersible Lights
- LED Light
- 4L x 2-1/16W Inch
- Red
- Optronics
more information >
UltraThin ID Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Red Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- ID Bar
- Surface Mount
- Submersible Lights
- LED Light
- 15L x 1-1/2W Inch
- Red
- Optronics
more information >
LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger
- Trailer Lights
- Tail Lights
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 8L x 3W Inch
- Red
- Optronics
more information >
Product Page this Question was Asked From
LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - 23 Diodes - Driver Side
- Trailer Lights
- Tail Lights
- License Plate
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 8L x 3W Inch
- Red
- Optronics
more information >
Continue Researching
- Shop: 2" Round Grommet - Flush Mount - Open Back
- Video: Optronics Trailer Lights - Tail Lights - STL111RB Review
- Shop: PVC Grommet for Peterson 6-1/2" Long Oval Trailer Lights - Flush Mount
- Shop: GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Red Lens
- Shop: GloLight LED Trailer Clearance or Side Marker Light - Submersible - 6 Diodes - Round - Red Lens
- Shop: PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Shop: GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Red Lens
- Shop: Peterson Great White LED License Plate Light - 4 Diodes - Chrome Housing - Round - Clear Lens
- Q&A: Should Butt Connectors On a Boat Trailer be Replaced with Heat Shrink and Solder
- Shop: Trailer Hitch
- Video: Review of Peterson - Trailer Lights - B421-18
- Video: Optronics Trailer Lights A70GB Review
- Video: Optronics GloLight Trailer Lights Manufacturer Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL111AKPG Review
- Video: Peterson Trailer Lights - Reflectors - B489R Review
- Video: Optronics LED Trailer Mini Clearance and Side Marker Light with Grommet Review and Installation
- Search Results: 4 pin flat connector
- Search Results: fender light
- Search Results: 3 wire pigtail
- Search Results: a46pb
- Search Results: all836717
- Search Results: dexter 10
- Search Results: trailer reflectors
- Q&A: Replacement for Lippert 3,500 Lb LCI35-SB-85-68.5 Axle
- Q&A: Replacement Jack for 2014 Legend Enclosed Trailer with A-Frame
- Q&A: Replacement Swing Down Stabilizer For 18' Aluma Trailer
- Q&A: Lighting Requirements for Trailer that is over 80 inches in Width
- Q&A: Replacement LED Trailer Tail Light Measuring 15 by 1-3/8 Inches with 14-1/8 Inch Mounting Holes
- Q&A: Will Peterson LED Identification Light Bar # M191-3RL Fit Nitro Boat Trailer