4-1/4" Round. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.
Features:
Specs:
This light has an industry-standard PL-3 connection as pictured above. The light accepts a 3-prong plug (sold separately).
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at and showing you how to install the Peterson-Lumenx LED Trailer Tail Light. This light's going to give us all our necessary functions like our running lights. Our turn signals and our brake lights. As you can see these LED's are really going to put off a lot of light. Not only help keep you safe but other passengers on the road as well.Now what sets this light apart from any of the others is that it's LED. Those LED's are going to last a lot longer, they're going to be more reliable because you don't have to worry about any brittle filaments like tour traditional incandescent light has.
And because of that there will be a great upgrade from your traditional style incandescence's. They also use less power to work.Now each light is going to have nine diodes and something else that's going to set this apart from other lights is not only it is compatible with 12 volts systems but also 24 volt systems. The light does not come with the plug so depending on which style plug your trailer has already you may or may not have to buy a new one to work with the light. If you need one you can find it on eTrailer.com.All right, here on the back of the light we have our connection points. They do come with dielectric grease already on the contacts.
That way we don't have to worry about it during our install. And there's also raised letter on the back which tells you what each contact point is for. I'll give you a couple of measurements to make sure this will work with your application.The light is 4 1/4" wide and as far as the depth, from here to the end of the plug is 1 11/16" of an inch. Now I'll show you how easy it is to get these lights installed. They are designed to be used with a rubber grommet.
Since we're replacing ours, we're just going to go ahead and put in a new grommet while we're doing that. If you need a new one, or a replacement, you can find one on eTrailer.com.Now I'll show you how easy it is to get this light installed. First we'll take our wiring and feed it through the hole and just plug it into the back of the light. Now all we have to do is push the light into the grommet. These can be a tight fit so if you need to use some spray silicone lubricant or even some soapy water to help you out you can go ahead and do that now and then it will pop right into place.All right, now we can go ahead and put power to the light and make sure all the functions work properly.
Here we have our tail lights, our turn signal, and our brake lights. And that will do it for our look at and installation of the Peterson-Lumenx LED Trailer Tail Light.
Average Customer Rating: 4.6 out of 5 stars (108 Customer Reviews)
4-1/4" Round. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.These worked great
Easy to install replacement
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
Great product. Did not listen to my salesperson Jesse. I do need the 2 prong adapters.
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
Purchased these in April, installed in May. Second trip I made with the trailer in July, the lens fell off one light. No damage, it just fell off.
Neither E-trailer, nor Peterson will warranty the light.
I think it's the last time I spend money with either of them.
Exactly what you'd expect. Seems to be a good quality grommet-mount LED light. I used it for a mid-ship marker on a gooseneck.
Two of the three lights I installed randomly turn themselves off. At times they also require multiple “touches” to operate, which can get frustrating.
The light is very bright and is good quality I love it
Good product, nice bright led's
Should last a long time. Great customer service and good website description of product. Etrailer has always been a great company to deal with. Keep up the good work.
perfect timing on the ETA of parts Thanks alot
Very nice looking lights. Disappointed in that I did not watch the video to see that a harness is needed to wire the lights. I will get them with next order though.
Bought 4 tail lights only 1 worked right out of the box - had to work with the other 3 to get them to work
Exactly what we were looking for. I do think the description needs to be more clear as I ordered an extra wire that actual came with the light. Other than that received the product earlier than expected and we were able to finish the job for the customer sooner.
Easy installation. Working perfectly after 1year
I was worried that the backup lights would not be bright enough, but they’re surprisingly bright for only one segment of the light.
Easy instillation and very bright. But you must be very thorough that you have the right sized grommet for the hole in the bed or trailer AND for the light you are using. Not all grommets are the same as with trailers and flat beds so make sure that you double check the hole size both ways of the bed and the light to minimize head aches when you go to install.
I used these to replace the tail lights on my utility trailer. They are bright and because they are LED they will not require any attention. I look forward to many years of reliable service.
Thank you for the prompt service.
Perfect replacement for my damaged tail light on our new Timpte 720 aluminum car hauler. Shipping was very quick and packaging was perfect. Thank you for the great service.
Great light but would need to manually turn them on each time you kill the main switch in the horse trailer. Will reorder the same light but without the touch switch in the middle of the lens. Bad on me for being a poor electrician.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.