LED Trailer Turn Signal and Parking Light - Submersible - 7 Diodes - Round - Amber Lens

Video Transcript for Optronics Trailer Lights - Tail Lights - STL13AB Review

Today we're going to be taking a look at the Optronics LED trailer light. This is a round trailer light that serves as a turn signal and parking light. It's going to feature a sonically sealed water proof housing and lens unit that is submersible. The units going to feature a durable surface bound technology when it comes to the construction of the LED circuit board. That's going to better withstand shock and vibration. It also allows for improved heat distribution. Now this is a full LED system.

LED's make great replacements for incandescent lights. They last longer, they burn brighter and they're much more efficient. You don't have to worry about replacing bulbs or worry about brittle filaments. It's going to feature a nice poly carbonate lens and housing. It's going to be an amber lens.

This is a recess mount installation. It will require a mounting grommet that is sold separately and available at etrailer.com. This light will fit into a four and a half inch diameter hole. It will accept an industry standard three prong plug which is sold separately as well. It is Department of Transportation compliant. It meets FMVSS 108 and CMVSS 108 requirements for automotive lighting. Taking a look at the dimensions real quick.

Starting with the diameter. It's going to give us a measurement of about four and 5/16th of an inch. The overall depth. That's going to give us a measurement of about one and 13/16th of an inch. That's including the plug area.

Not including the plug area is about three quarters of an inch deep. It's going to contain a total of seven diodes. It's going to have a power draw of 12.8 volts for the stop and turn signal 0.234 amps. For the tail light 0.033 amps. Optronics puts a life time warranty on the LED's. We're going to go an hook it up to our power source. That way you can see what it looks like with power running to it. Connecting the three prong plug is very easy. You just line up the connection points. Push it in until it seats all the way. Creates a nice tight seal. We're going to go ahead and turn off our overhead lights. We get a better look at the light. This is going to be that parking light function. Then when we apply our turn signal. You can see how our signal output increases. Nice, bright design. Again the multi-diode design really helps optimize the overall light output. We'll do that with the lights on as well. That's going to do it for today's look at the Optronics LED trailer light.