Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
3/4" Round. Waterproof mini trailer light serves as either a side marker light or a clearance light. Durable polycarbonate housing and lens. Recessed mount with included black PVC grommet. 2-Wire pigtail. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number NCL12RKB. This is the Optronics Sealed Mini LED Side Marker and Clearance light. It's a P2 rated light that's going to function as either a clearance side marker or identification light. It's going to product a 90 degree angle of light going left and going right. LED's are going to be great replacement for incandescent lights. They're going to last longer.
They're going to burn brighter, and they're going to be much more efficient. You don't have to worry about replacing bulbs. You don't have to worry about brittle filaments. This is going to feature a sealed, water proof housing and lens design. It's going to have the build in rubber grommet for mounting. We're going to have a 2 wire design, so you're going to have your black and white wire.
That's going to be protected by a wire sleeve. White wire's going to be for ground. Black wire's going to be for power. This is going to give us a diameter, measuring just the light portion, of 3/4 of an inch. The depth is going to measure about 15/16 of an inch. The installation does require an 11/16 inch hole at the desired location.
It's going to be a 1 diode design, so it's going to contain 1 red LED. The LED light is going to draw 0.047n amps at 12 volts, and is Department of Transportation approved. Optronics is going to cover it with a lifetime warranty on the LED. You can mount this numerous different ways. You can just drill out the appropriate sized hole that it needs to sit in. The grommet's going to help that nice tight seal, and tight fit.
Or you could do a mounting adapter. This would simply accept the 3/4 inch Optronics light. It goes in there. You just push it down into place, then you have your mount holes out here to get it fully secured. Either way, mounting plates or mounting adapters are going to be sold separately. You can find those here on our website. Last thing I want to do is simply just go ahead and simply just hook it up to our external power source. That way you can see what it looks like with power running to it. We'll also be able to turn off our overhead lights so you can see it in a low light setting. This is what the light looks like. You can see it sends out a nice consistent signal. It's going to contain 1 LED. We're going to have the red lens. It allows a lot of light to come through. Again, this light's going to function as your clearance side marker or identification light. That's going to do it for today's look at part number MCL12RKB.
Average Customer Rating: 4.8 out of 5 stars (700 Customer Reviews)
3/4" Round. Waterproof mini trailer light serves as either a side marker light or a clearance light. Durable polycarbonate housing and lens. Recessed mount with included black PVC grommet. 2-Wire pigtail. P2 rated.Great customer/sales representative, Michelle! She was awesome! She crossed referenced another number, not exactly a high volume or priced item. But she treated me like I was spending a million bucks. Also, she sent me multiple emails so I could track my package, receipt, and a thank you! All that for about a $10 order. I’ll never buy from anyone else. Thanks etrailer and Michelle.
Shipment was very quick. Product looks like it will fit my need for a topper on HoverKart Whip very well.
There great my trailer keep dragging the old light off but no problem wit these thanks
D B.
9/11/2017
Great
The application I have requires good visibility at a distance of 30ft... these are perfect.
My replacement side marker light arrived in perfect shape and just what I had ordered. Installed it right away and it works great.
These little lights are great ! Bright waterproof.. work perfect on my boat trailer !
E trailer always has what I need and receive the parts and n a timely matter.
Have used etrailer now on a number of occasions and have always been satisfied with the service I received. Have not had any problems and the quality of the products and the time delivered have been excellent.
Excellent product!
I am not only happy with with the product, but with the service etrailer provided to me. Great people!
would like to see the leads (wires) of a heavier gauge wire to handle vibration better..
I like that these are large, bright, easy to see
Simple and long lasting. Changing over our entire fleet to this type lighting.
better than i expected. Liked the transation, the web page, the product and deliver was very good.
Just as good as the original, and a better price versus the auto/truck stores.
It's the little l. e. d light that could, comes with everything gromet holds them nicely
As good as it can get. 3/4 hole in the frame and just slip it in
Still working great after a year! Would buy again
Just what i was looking for
Order was shipped fast, and product was as advertised. Great vendor
Delivered as promised, quality excellent
Nice compact light, priced right fast shipping
Easy to install and incredibly bright!
Exactly what I wanted, prompt deluvery
awsome
Works good fit good bright
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
C P.
8/15/2023
Working well. All lights installed easily