3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with included grommet. 2-Wire pigtail. PC rated. 2 Diodes.
Features:
Specs:
This red LED light serves as either a side marker light or a clearance light. The light gives your truck or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your truck or trailer.
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
Recessed-mount trailer lights install underneath a housing or a grommet (A11GB). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Glolight Uni-Lite mini-LED clearance or side marker light. This small, round trailer light can function as both a clearance light and a side marker light when properly mounted. The Glolight lens creates a solid light pattern with a smooth appearance, and it is a sealed, waterproof construction that is submersible.It features the durable surface mount technology when it comes to the construction of the internal LED circuit board that design better withstand shock, moisture and vibration. It also allows for improved heat distribution and overall thinner construction.Now, this is an LED system. LEDs make great replacements for incandescent lights. They last longer, they burn brighter.
They're much more efficient. With LEDs you don't have to worry about replacing bulbs. You don't have to worry about brittle filaments. It's just a nice, nice, light to have, especially when compared to incandescent lights.Now, this uses a red lens over white LEDs. It's made from a durable polycarbonate construction when it comes to the housing, and then the lensing is acrylic.
It's a recessed mount installation, with the included grommet. Installation area requires a 3/4" diameter hole. It's a two-wire pigtail, so we have our white wire for ground, black wire for power. It is Department of Transportation compliant, as well as SAE compliant, and it is PC rated.Now, internally it has two diodes and the diameter of the unit is about 3/4" in diameter. The depth is about 7/8".
We're going to go and hook it up to power, that way you can see what it looks like with some power running to it. We'll also turn off our overhead lights so you can see it in a lower light setting.Again, white wire is our ground wire, black wire is the power wire. This unit sends out a nice, consistent signal, pretty bright light for as small as it is. Again, two LEDs internally, so the multi-diode design optimizes the overall light output. Power draw at 12.
8 volts is 0.04 amps, and Optronics puts a lifetime warranty on the LEDs.That's going to do it for today's look at the Glolight Uni-Lite mini-LED clearance or side marker light.
Average Customer Rating: 4.7 out of 5 stars (63 Customer Reviews)
3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with included grommet. 2-Wire pigtail. PC rated. 2 Diodes.Great mini marker lights and sealed perfect so they don't corrode out in six months
I like small marker lights. Easily seen without being overwhelmingly bright which can cause glare. I've had great experience with the quality of Optronics; with less expensive brands not so much.
I installed GloLight Mini LED clearance lights on a flatbed I fabricated for an older GMC K3500, truck. The lights continue to function as they should. I am happy with my purchase.
This is a fantastic little light. I've bought off brands before and the wire is so thin you know it's not going to last very long. The wires on this light are normal gauge (about 16g) and very easy to solder and connect. Very confident it will hold up to abuse of off roading.
And it is bright! I use these for marker lights and turn signals. No issues seeing them during the day.
Nice and bright! Looks as good today as it did a year ago when installed.
What I like about these are that the wires are nice and heavy gauge. It feels very well made and I'm confident it will withstand the abuse of my Baja. I use these as marker lights and turn signals. They are really bright and no issues seeing them during the day.
Great product, fast delivery !!
worked great
Perfect fit on new Jeep fenders. This was the only site that had this size light with both Marker and Turn lights.
Nicely replaced my burnt out marker lig ht.
Bought this to replace the front corner markers/running lights in my GM truck. Since the OEM setup combines the marker and signal function into one filament, I couldn’t just plug in an LED “bulb”. I trimmed the housing to fit the rubber grommet for this uni-lite and with some wiggling got it to fit nicely. Rewired the truck to provide separate running light and signal wires and everything has been working great.
etrailer always delivers good and quickly.
Mark. Indy
Don't let the small size fool you, these little lights are pretty bright. You need to be spot on with the diameter of hole you drill that these lights recess into.
Excellent to have a marker light in a 3 wire to put a blinker on the fender of the trailer too.
Etrailer is one of the best company we have ever ordered from. We always receive exactly what we order and arrives quickly. This is our “go to” company for all our trailer needs
Not very good turn signal it has very little blinking so not warning people next to trailer.
Etrailer makes it easy to find hard to find items, their follow up communications and prices are great.
Etrailer makes it easy to find hard to find items, their follow up communications and prices are great.
Lovers it very easy to find and order p arts
Half of them are cracked and a couple quit working after a month.
Works great for my UTV signal lights!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.