Replacement Lens for Optronics LED Clearance/Side Marker Light with Reflector - Oval - Red
(23 reviews)
Price: $4.30
In Stock
Replacement Lens for Optronics LED Clearance/Side Marker Light with Reflector - Oval - Red
Item # OPT67WR
Our Price: $4.30
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (23)
- Q & A (0)
- Videos (1)
- Photos
Optronics Accessories and Parts - OPT67WR
- Trailer Lights
- Light Lenses
- Oval
- Optronics
- Red
Replaces the red, polycarbonate lens for your Optronics LED clearance or side marker light with reflector (MCL0030RBB).
Features:
- Replaces the lens for your Optronics LED clearance or side marker light with reflector (MCL0030RBB)
- Constructed of durable red polycarbonate plastic
Specs:
- Dimensions: 3-3/4" long x 1-3/4" tall x 3/8" thick
- Quantity: 1 lens
Fits:
- Model number MCL0030RBB, Optronics LED clearance/marker light
A0030RBB Replacement Lens for Optronics LED Clearance/Side Marker Light with Reflector - Oval - Red
SAE AP2 17 DOT
Video of Replacement Lens for Optronics LED Clearance/Side Marker Light with Reflector - Oval - Red
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Optronics Replacement Oval Red Lens For LED Clearance Or Side Marker Light - OPT67WR
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this replacement oval red lens for Optronics LED clearance or side marker lights with reflector. Now, if you have the Optronics oval red lens LED clearance or side marker trailer light with reflector and that model number on that light is MCL0030RBB and you need to replace that lens, then this is the part that you are going to need. This is constructed out of a durable, red polycarbonate plastic. And let me pull out my ruler here just to give you some overall dimensions.
I'm gonna flip this around on the back side here. It's gonna be a little easier to measure. I got it up against my ruler. The length, we're sitting right at 3 3/4 inches long. Looking at the width at the widest point, we're sitting pretty close to an inch and 3/4.
And then looking at the thickness, we're sitting pretty close to 3/8 of an inch. Now, you are going to get one lens. And that's going to conclude our look today. I hope it was helpful for you. Again, my name is Andy.
Thank you for joining me..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Lens for Optronics LED Clearance/Side Marker Light with Reflector - Oval - Red - OPT67WR
Average Customer Rating: 4.3 out of 5 stars (23 Customer Reviews)
Replaces the red, polycarbonate lens for your Optronics LED clearance or side marker light with reflector (MCL0030RBB).by: Keith G.07/30/2023
Google search showed e-trailer.com with this as a match to Glo-Brite 122R/122Y, but it is too shallow to fit the standard bulb housing. This one is 3/8in depth and the standard bulb housing is 7/16in at the ends and 3/4in in the middle.
by: Brenda10/13/2022
I had a hard time finding the correct size and shape replacement lens for our solitude 5th wheel, but etrailer had it! Thanks to a fellow RV’er for the recommendation! Thank you etrailer, exactly what we needed!
by: PGHMOM04/13/2024
This appeared to be a well made product. Item chosen was wrong fit for my need and there was no cost effective way to replace, so I have never used.
by: Billf202/13/2024
perfect fit. Glad I found you guys.
by: Don07/03/2023
The lense we received did not match the numbers on the one we ordered and did not fit.
Brooke M.
7/11/2023
Oh, no! I will have our customer service team reach out to you about this.
by: Barry 09/21/2022
Needed this to replace a side marker light on my 2020 Fleetwood Discovery LXE 40D RV. The item when first ordered was on back order, but even though it took a little longer to receive, it worked out perfect.
by: Chris 07/31/2023
Great service
by: Steven06/30/2023
Got our order thank you!
by: Steve02/07/2023
The quality is good, and diameter was good but, the depth needed was to shallow for the light to fit properly.
by: Luciano01/16/2023
The part was easy to find and shipped immediately. Great website that I have used multiple times.
by: Lowell 12/05/2022
Very speedy service. No problems whatso ever.
by: Doug 09/20/2022
Worked tor my need
by: Chuck 02/12/2024
by: Cervando07/10/2023
by: Scott 03/31/2024
by: David 02/23/2024
by: Gary 07/25/2023
by: Jorge06/22/2023
by: Bob 06/12/2023
by: Michael04/06/2024
by: Stacy 07/24/2022
by: Dolan12/20/2022
by: Todd 08/27/2022
23
23
See what our Experts say about this Optronics Accessories and Parts
- Replacement Clearance Lights For Glo Brite 122r/122y The Optronics LED Clearance or Side Marker Trailer Light is available in Red # MCL0030RBB and Amber # MCL0030ABB. These are the closest replacements to the Glo Brite 122r/122y lights you have. The lights only have one LED diode versus the 3 in your light. You are able to get a replacement lens in either Red # OPT67WR or Amber # A0028AB if your lens becomes damaged with the new lights.
view full answer...
Info for this part was:
Edited by:
Lindsey S
Installed by:
Andy C
Written by:
Justice A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
8/2/2023
I know that we do not have a replacement lens that would be an exact fit the Glo-Brite 122R/122Y. We have had others ask this before which is probably why Google directed you to us. What we recommend is replacing the entire light. We have similar lights with the Command LED lights part # 328-K-51 for amber and part # 328-K-52 for red. These measure 3.75 inches long x 1.625 inches tall x 0.5 inches deep and have mounting holes that are spaced 2.5 inches apart on center.