Replacement Trailer Clearance or Side Marker Light Lenses For 2012 Forest River Sunseeker Motorhome

Question

Question:

can I buy just the lens

asked by: Deb M

0

Expert Reply:

We only carry the Amber LED Trailer Clearance or Side Marker Light # 328-K-51 for your 2012 Forest River Sunseeker motorhome. We do not have a replacement lens.

We also have the Red LED Trailer Clearance or Side Marker Light # 328-K-52.

expert reply by: Bud M

0

Answer 1

For your 20K Pro Series 5th Wheel hitch to work with the factory puck system on your 2019 Ford F-350 you will need an adapter. There are currently two options to choose from and I recommend the Reese Elite Series Underbed Rail Adapter for Standard…

view full answer...

Answer 2

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 3

We have some replacement clearance lights that are similar to the Glo-Brite lights, but unfortunately we do not carry Glo-Brite brand, and from what I understand they have gone out of business, so I do not have the exact lens covers that you are…

view full answer...

Answer 4

I recommend using Clear Silicone #FAS59FR when installing the LED Trailer Clearance or Side Marker Light #328-K-51. This will allow you to seal the hole for the wiring as well as the holes for the screws. A Caulk Gun #PTW54295 is needed for the tube…

view full answer...

Answer 5

I have a replacement light option for you, but we do not offer a replacement lens for the Glo-Brite 122 at this time. The closest replacement option is the LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 8

I do have an option but Glo-Brite is no longer in business so you won't be able to get any replacement parts for these lights such as lenses. The only option you have would be a full replacement for which the most similar option we offer is the…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I have a solution that may work for you, but we do not currently have any 3" diameter submersible reverse lights. Have a look at the Optronics Backup Light #BU45CB which is a 4-1/4" diameter light that can be mounted to your trailer using…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Trailer Clearance or Side Marker Light Lenses For 2012 Forest River Sunseeker Motorhome

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching