Can I Use a Timbren Axle-Less System on a Boat Trailer That is Used in Salt Water
Question:
can these be used on boat trailers in salt water ?
asked by: John F
Helpful Expert Reply:
Yes. Timbren Axle-Less Suspension systems like the # ASR35HDS05 have a thick powder coating on them, so they could be used on a boat trailer that gets submersed into salt water and do just fine. The spindle uses # 15123 outer and # 25580 inner bearings and you'll want to use hubs with either a dacromet plating or a galvanized finish.
The hubs I recommend would be the Dexter Trailer Hub and Drum Assembly - 6,000-lb Axles - 12" Diameter - 6 on 5-1/2 - Galvanized # 8-201-51UC3 which would work well for wheels that have a 6 on 5-1/2 bolt pattern. If you just need hubs and don't plan to add brakes then the # 8-213-51UC1-EZ would work well.
I've linked our entire selection of hubs that would work on these spindles for you to check out, as well as our entire selection of 12" brakes-both electric and hydraulic.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Dexter Trailer Hub and Drum Assembly - 6,000-lb Axles - 12" Diameter - 6 on 5-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- EZ Lube
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 5 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-213-51UC1-EZ Review
- Search Results: 84 spindle
- Search Results: 42 spindle
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Replacement 3,500 lb Leaf Springs Needed Measuring 26 Eye-to-Eye
- Q&A: Recommendation To Replace Drum Hubs With Idler Hubs
- Q&A: Process for Changing a Damaged Spindle on a Trailer Axle
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Shop: Grease Cap, 2.44" OD Drive In with Plug - Qty 2
- Shop: etrailer Bearing Protectors w/ Covers for 2.32" Hub Bore - Chrome - Qty 2
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Shop: Replacement Trailer Hub Bearing - LM67048
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Q&A: Replacement Spindle And Hub For 6,000 lb Axle on Boat Trailer
- Q&A: Can a Hub/Drum Be Switched Out For An Idler Hub On a 6,000 Lb Trailer Axle
- Q&A: Removing Trailer Bearing that is Stuck on Spindle After Removing Hub
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25580
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Gooseneck Hitch