Summer Starts Here - Save up to 70%
Trailer hub-and-drum assembly fits 6,000-lb axles with spindles that require a 2-1/8" or 2-1/4" ID grease seal. GAL-DEX zinc coating designed for marine applications. Bearings, seal and grease cap sold separately.
Features:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a brief look together at this galvanized trailer hub and drum assembly. This galvanized trailer hub and drum assembly is gonna fit your 6,000 pound Dexter axles with spindles that require a 2-1/8 inch or 2-1/4 inch inner diameter grease seal. This is gonna be compatible with your electric and hydraulic brakes. And this features a gal deck zinc coating that's designed for marine applications. So the dimensions of this drum is 12 inches in diameter and two inches wide, and our bolt pattern is 6-on-5-1/2 inches.
And the first number in that bolt pattern is the number of wheel studs or bolts. And then that second number is the diameter in inches of the circle on which our wheel studs sit. So to determine the bolt circle diameter on an even number on a bolt pattern, you're simply going to measure from the center of one wheel stud to the center of the wheel stud directly across from it. And this has a weight capacity of 3,000 pounds. So when this one is matched with one on the other side of the axle, that's gonna meet your 6,000 pound axle capacity.
This does include the races and the wheel studs. So those races, the inner and outer race, are already installed. However, this will require bearings, a seal, and a grease cap. Those are sold separately from this. But on your screen, I'm including all the information that you need on what inner bearing and what outer bearing you are gonna need and then the grease seal and the grease cap.
So all that information is there and you can find that information on this product page as well. Well, I think that's gonna wrap up our brief look today. I do hope that our time together was helpful for you. Again, my name is Andy. Thank you for joining me.
.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.