Recommended Galvanized Hub and Drum with 1.75 Inch Inner Bearing Diameter

Question:

I am looking or a hub/brake drum 12inch dia, 6 lug uses lug bolts, not lug nuts inner bearing is 1.75 in. inner grease seal surface is 2.125 in. grease cap flange is 2.330 in. ID, with bearing buddy on a double axle trailer with 10K lb boat ideally galvanized for marine

asked by: Robert

Expert Reply:

For a hub and drum that should work with the axles on your boat trailer, I recommend the Dexter Trailer Hub and Drum Assembly - 6,000-lb Axles # 8-201-51. These are compatible with the inner bearing 25580 that has a 1.75 inch inner diameter. This hub will use the outer bearing 15123 that has an inner diameter of 1.250 inches, so you will want to confirm that your outer bearing matches this. This is a 6 on 5-12 galvanized hub and drum that includes the races and wheel bolts.

For the required bearings, you can use the TruRyde Bearing Kit # BK3-110 that will include the inner and outer bearing as well as the grease seal and cotter pin.

expert reply by: Chris R