Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Our Price: $184.94
Confirmed to Fit
2004 GMC Sierra
1500
2500 LD
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
54% prefer this
4% prefer this
- All Info
- Reviews (830)
- Q & A (0)
- Photos
2004 GMC Sierra - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Class III
- 2 Inch Hitch
- 6000
- Visible Cross Tube
- 600
- CURT
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your GMC Sierra's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13322 Curt Class 3 Trailer Hitch Receiver
Item # 13322
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Tech Tip
Product not intended for vehicles with roll pan bumper, Tommy Gate lift, or 10" drop bumper. No drilling required for installation
Complete Towing Package for 2004 GMC Sierra
Package Price:$221.56
2004 GMC Sierra Owners Who Purchased This Trailer Hitch Also Bought...
Popular Sierra Trailer Hitch Accessories
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13322
Average Customer Rating: 4.9 out of 5 stars (830 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Scott B.08/31/2017
2012 Chevrolet Silverado
I opted to purchase a Curt trailer hitch for my truck. Sheila took my order over the phone and made sure I had the right product for my 2012 Chevy Silverado. Great service. I received the hitch in perfect condition. Watched the installation video and it went on just as easy as I expected it would. Great product and a great price with free shipping. I highly recommend etrailer.com for anyone who needs a great reliable product supplier. Thanks again!
by: Sean07/13/2022
I ordered this hitch in May. It took a couple of weeks to ship. I contacted etrailer and like most companies in this day and age, help is tough to come by. Once the item shipped, I received it very quickly. Installation wasn't difficult. My truck is 10 years old, so I really thought the old bolts would give me a hard time. They weren't too bad to remove. The new hitch went on quite easily. My truck is a 2012 Silverado 1500
Sean
7/14/2023
A year later hitch is great!
by: Justin07/29/2018
2000 Chevrolet Silverado
Seems like a good hitch . If my bumper wasnt a bit out of wack it would have mounted right up after some banging on the bumper it went right on even around my dual exhaust, So Happy. Shipping was fast and as described and a great price. Can't wait to tow my new travel trailer.
Justin K.
7/29/2019
Works great, towing my travel trailer
by: Kennie05/09/2023
2001 Chevrolet Silverado
hitch looks great, it was easy to install on my 2001 Chevrolet Silverado, no drilling required.
by: John R06/21/2013
2011 Chevrolet Silverado
Received the hitch wednesday and installed it thursday. The install went great, I took my time and installed it in about a little over an hour. Everything aligned properly, and fit like a glove on my 2011 Chevy silverado. Glad I got the curt hitch, it looks beefy and heavy duty, like a factory install. Glad I installed it myself, the dealers around here want about $500 to install the whole deal. Watched your install vids, they were very helpful. Googled trailer hitches on the internet and you guys came up, so I thought I'd give you a try. Completely satisfied doing business with etrailer.com. Shipping was fast, price was right. Here's a few pictures. Thanks Guys, John
by: Eric 04/25/2024
2008 Chevrolet Silverado
Really pleased with product. Arrived timely, bolted right up to my truck with little effort. I have used it a couple times a week for a year and it has held up very good. Would buy again.
by: Ed08/23/2020
2007 GMC Sierra New Body
Just installed the Curt Trailer Hitch Receiver to my 2007 GMC Sierra New Body Style and it went smooth. This replaced an old rusted out OEM hitch receiver and the Curt fit like a glove. I was able to install it on my own with the help of a floor jack raising it up in the middle and finger tightened the two bolts under the bumper then bolted up the rail bolts. I then removed the floor jack and torqued down all the bolts slid in the Curt ball mount and secured it with the included pin and cotter pin and I was back to towing my Waverunners to the harbor for some fun.
by: FOPMAN12/04/2015
Lexus
The customer service Rep: Lexus G. was extremely helpful in directing me to exactly what I needed! Upon receiving the package, I was impressed with the way that the items where protected for shipping. The overall quality of the Hitch and Trailer Connector Socket where impeccable. The entire removal and installation of both units took no more than 35 Minutes. Thanks to to instructional Video!
I am Very impressed with the Company, Service and most of all the Hitch and Light Connector. Thank You so very much eTrailer for everything.
Frank "D"
by: Edd T.06/16/2018
2007 Chevrolet Silverado
My 2007 Classic Silverado Crew Cab 4x4 did not have a factory hitch receiver, so I selected the 13322 Curt Hitch Receiver because it closely resembles the OEM hitch receiver and attaches to the bottom of the bumper. Installation was easy, as shown in the videos and described by other reviewers. All holes aligned perfectly. I did not remove the spare tire as it is not necessary. I used two jack stands to raise/support the receiver frame in place while I started the first bolts. I had the 22mm and 19mm sockets needed to tighten and torque the bolts/nuts. It looks great and I now am able to tow.
For the wiring I installed the 30955 Hopkins 7-Way and 4-Way Trailer Connectors to the bumper adjacent to the license plate. This required drilling a 2-1/8" hole in the bumper, which was time consuming, but it now resembles a factory installation. I was able to remove the license plate and connect to the factory plug.
I ordered these parts from etrailer for a number of reasons: 1) The website is intuitive and contains a tremendous amount of information for the person who is trying to research product information; 2) the selection and inventory is amazing; 3) the prices are very competitive – free shipping for orders over $99; and 4) the dedicated customer service is outstanding – the email communication is prompt. I ordered on a weekend and it was delivered by the following Friday.
A very positive first experience.
by: Scott04/19/2018
2008 Chevrolet Silverado
I recently was getting ready another season of towing my boat and landscaping equipment. I inspected my trailers and all the lights. While installing the receiver into the hitch I noticed a small hole in the hitch frame. After further investigation I noticed the hitch was in bad shape. I looked around at different hitch suppliers and found etrailer. Great price great service. All hardware included installed myself.
Thank you
by: Gary10/01/2021
Perfect fit, easy install, nothing else to say! My original hitch rusted out great replacement.
Gary
10/2/2022
The hitch is a perfect replacement would recommend to anyone needing a hitch
by: Pete06/09/2017
2003 Chevrolet Silverado
Ok so I received it in 3 days which is great for free shipping and the next day the wife and I got off work at 2 where she went to get grand kids from day care and I went home to put on hitch. Got home and took out tools, got myself a talk glass of ice water because it's 107 here in AZ and dropped tire, took ball off bumper, and bolts off frame and installed new hitch. I put tire back under truck and was rolling with trailer on just before 3 and even before wife got home. Very easy and fit great. Can not beat the cost for this being so easy.
by: Terry 05/19/2024
2012 Chevrolet Silverado
Delivery was slightly earlier than indicated. Packaging was separated from the stapled section, then taped up (most likely a shipping company issue).
by: Bill G.04/10/2020
Excellent replacement for a factory hitch or for a truck that didnt come with one originally equipped. All hardware included and of nice quality. Instructions easy to follow and clearly printed. No drilling required. Bolts into existing threaded holes in bumper support and bumper brackets where attached to frame of truck. Third set of holes use a carriage bolt, large washer and nut through and existing hole in frame near the leaf spring mount. Threads in bumper support may need rust cleaned out with a tap (14mm x 2.0 thread pitch) if a factory hitch was not installed and truck has lived in the rust belt states. Some minor trimming was required of the bumper plactic covers on my particular application. A sawzall or a hacksaw with a fine tooth blade works great and leaves a clean cut. Otherwise installation time was about 20 to 30 mins using air tools and a lift. Product price and shipping was great, recieved hitch packaged nicely and undamaged within a few days of placing order.
by: Tyler M.10/13/2017
2006 Chevrolet Silverado
Super fast shipping especially with it being free shipping! Hitch Arrived on the day it was scheduled and I had it installed in about forty-five minutes along with the trailer wiring kit. I plan on using it this weekend to tow my camper to the beach. Everthing looks great. Thank you guys for your promt service!
by: Charles C.04/01/2016
I called in my order as I still like to talk to a sales person rather than online, it was quick and professional. My hitch shipped for free and arrived within 4 days. I went to mount it and it didn't line up and I was mad, then I remembered backing into a post years ago pushing in the bumper a half an inch. I grabbed my sledge hammer and resolved the issue. My hitch then was simple to mount and friends perfectly! Thank you!
by: Charlie11/16/2016
2002 Chevrolet Silverado
Recently bought the curt pn 13322 for 02 ecsb silverado. Packaged well, exxtremely good quality, was a pain to install due to bent bumper and one bolt broken off from previous owner but not etrailer.com fault. Pulled a 20 ft car hauler today and checked it afterwards, no issues whatsoever. Would definitely recommend. Check your bumper alignment prior to install.
by: Douglas01/13/2018
2004 Chevrolet Silverado
I ordered this hitch late in the day on Jan 10th. I received it on Jan 12th just after noon. I was told it would likely take 4 business days. It took less than 48 hours and was shipped for free. I am not a mechanic but the installation took only about 20 minutes. Total cost for the hitch and electrical connector was much less than the quote I received from a local company to install the same hitch. Awesome hitch, awesome deal, awesome company. I am now a huge etrailer.com fan now!
by: Mike 04/15/2024
great company
by: Denny R.08/03/2011
2001 Chevrolet Silverado
The trailer hitch for my 2001 Chevy Silverado was exactly as indicated on etrailer.com web site. Very fast delivery service, I was quite pleased. Installed myself in about a hour. Hardest part of the installation was getting the existing two frame bolts loosened and out, after that tne installation went very well. I would definitely recommend etrailer.
by: Chris08/03/2018
2003 Chevrolet Silverado
Trailer hitch and wiring kit showed up on time great product ,great price ,easy to install. Trailer hitch and wiring only took 20 minutes to install. My beer didn't even get hot before I was done.
by: Jeffrey 04/19/2024
2013 Chevrolet Silverado
Good job!!. Fast work on getting order out.UPS was a little slow but in all very satisfied.
by: Cm04/18/2024
Great fit for Chevy Silverado and shipped immediately
by: Mark06/27/2021
2008 Chevrolet Silverado
Quick easy install, once hitch came into stock, I had it very quickly! Customer was happy!
Mark
6/28/2022
Installed this hitch about a year ago, still working good, good finish, and holding up great.
by: Benjamin06/05/2018
2011 Chevrolet Silverado
With the proper tools in hand this job can be preformed in less than 30 minutes and that was removing my old rusty one. Granted I watched the video a couple of times to know what to expect. Fast shipping and a much heavier than my stock GM unit. My 2011 has Silverado receiver has never seen salt water. I'm not sure what caused this mess. See attached pictures
25
830
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Difference Between Curt & etrailer Trailer Hitch Receiver For 2010 Chevy Silverado 1500Good question, and there is just a single difference between the Curt and etrailer trailer hitches that fit your 2010 Chevy Silverado 1500, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer: - etrailer Trailer Hitch Receiver # e98849 - Curt Trailer Hitch Receiver # 13322 The matte black finish is nice as it hides the inevitable dings, scuffs and scratches better than the glossy finish, so that's the...
view full answer... - Does Curt Hitch 13322 Fit 2011 Chevy Silverado 1500Yes, the Curt hitch part # 13322 is a fit for your 2011 Chevy Silverado 1500 regular cab and would be a great option. I attached an install video for this hitch for you to check out as well.
view full answer... - Will Curt Trailer Hitch Receiver # 13322 Fit with Spare Tire on 2011 Chevy Silverado 1500The Curt Class III Trailer Hitch Receiver # 13322 referenced in your question is confirmed to fit your 2011 Chevy Silverado 1500 and will fit with the spare tire as long as it is the stock/factory size. If you have changed out the original spare tire with a larger size, it's possible that it will not fit with the hitch installed. I confirmed this with my contact at Curt. The stock spare tire will need to be removed temporarily during installation but can then be reinstalled once the hitch...
view full answer... - Is The Curt Trailer Hitch Receiver 13301 A Fit For A 2006 Chevrolet SilveradoWhile we do have a solution for you, the Curt Trailer Hitch Receiver # 13301 is designed for new generation models starting in 2007. My recommendation is the etrailer.com Trailer Hitch Receiver Class III - 2" # e98849 for your 2006 Silverado because the matte black finish tends to be more scratch resistant than the glossy finishes like that of the Curt. Included are video resources for both.
view full answer... - Recommended Factory-Like Trailer Hitch for 2008 Chevy Silverado 1500The trailer hitch I recommend for a 2008 Chevrolet Silverado 1500 is the Curt Trailer Hitch Receiver part # 13322 which has a factory like fit and finish at half the price. The capacities will also meet or exceed that of the factory trailer hitch as well. Please note, we only offer aftermarket trailer hitch solutions not factory options.
view full answer... - Class III Trailer Hitch Fit for 2000 Chevy Silverado 2500 LDThe Curt Trailer Hitch Receiver # 13322 you referenced does fit a 2000 Chevy Silverado 2500 LD and I have linked an installation video of this hitch on a 2000 Silverado for you to check out. There are also customer reviews with photos from customers who have installed this on their 2000 Chevy Silverado. However, there are a number of other Class III trailer hitches that are confirmed by the manufacturer to fit a 2000 Chevy Silverado 2500 LD, and the other options are the Draw-Tite Max-E-Loader...
view full answer... - Is Fascia Trimming Required to Install Curt Trailer Hitch 13322 on a 2012 Chevy Silverado 1500On some years that Curt trailer hitch # 13322 fits, there may be some trimming of the rear fascia for the hitch to fit properly. It is not necessary on all models but you will only know once you go to install the hitch. The area that would need to be trimmed would be at the bottom center of the rear fascia. It is an area that is 6-1/2 inches across and 3 inches tall measured from the bottom of the fascia. On the 2012 though it does not appear that trimming is required. I have included...
view full answer...
- Identifying Hardware Included with Curt 13322 Class III Trailer HitchThe Curt # 13322 Class III hitch uses a total of 6 bolts, two 1/2 inch carriage bolts and four M14 bolts. The 1/2 carriage bolts have a smooth round head on them, while the M14 bolts have a hex head on them so they can be tightened with a wrench. I've provided a diagram showing the difference between the two types of bolts that shows precisely where they're installed. I've also linked to an installation video that you may find helpful.
view full answer...
- Class III Curt Hitch 13322 Fit on 2007 Chevy Silverado 1500Yes, the Curt 2-Inch Class III Hitch # 13322 will fit a 2007 Chevy Silverado 1500. It also fits the 2007 Silverado 1500 Classic and Silverado 1500 New Body. It does NOT fit the Silverado SS. This hitch is rated for 6000-lbs towing and 10,000-lbs when weight distribution is used. Curt hitch # 13322 is USA-made and installs without drilling using included hardware. Written instructions, an installation video and a helpful article are linked for your reference. You can refer to the linked...
view full answer...
- Availability of Trailer Hitch for 1992 Mazda Miata to Carry Bike RackDue to the small size of the vehicle, there is not a Class III hitch with a 2 inch receiver available for the 1992 Mazda Miata. There is however a Class I available that has the 1-1/4 inch by 1-1/4 inch receiver opening, part # C11729. Because of the low 200 lb tongue weight capacity of the Class I hitch, bike racks used in a Class I hitch are limited to carrying 2 bikes only. Any additional bikes would place the load too far rearward of the receiver opening. This extended distance would...
view full answer... - Trailer Hitch that Fits Tight Against Bumper on a 2011 Chevy Silverado 1500The B&W hitch # BWHDRH25217 receiver would sit a few inches below the bumper on your 2011 Chevy Silverado. The Class V hitches for the 2011 Silverado 1500 are like that with the other option being Curt hitch # C15323, see video. Curt has a Class III hitch, # 13322, that fits up tight against the bumper. I have linked a video showing installation for you. Draw-Tite also has an option, # 75521, and I have linked a video for this hitch as well.
view full answer... - Availability Of Replacement Hardware For Curt 13322 For A 2003 Chevy SilveradoHello Renee. It sounds like you are looking for a replacement hardware kit for the Curt Class 3 Hitch # 13322 for a 2003 Chevy Silverado. We can provide a hardware kit with part # RHK. Once you go to the page for the # RHK there will be a box where you enter the part number for your hitch. In this case you will enter the part number 13322 in this box before adding to your cart. This will get you a complete hardware kit for installing your hitch.
view full answer... - Would Curt Hitch 13322 Work Well Installed on 2001 Chevy Silverado Towing Small TrailersIt certainly wouldn't hurt if you went with a higher capacity hitch than needed, but if you are staying under the capacity of the lower rated hitch # 13322 you would be perfectly fine with it as well. This hitch has a 6,000 lb trailer weight capacity which should be plenty for your small trailers. I attached a link to an install video for this hitch for you to check out as well.
view full answer... - Recommended Trailer Hitch For 2006 Chevrolet Silverado 1500I was unable to find the trailer hitch you mentioned but we do offer trailer hitches that will work great on your 2006 Silverado. I recommend the Curt Trailer Hitch Receiver, part # 13322. This is a Class lll trailer hitch and it has a 2 inch receiver opening. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes...
view full answer... - Which Curt Hitch for 2009 GMC Sierra 1500 Sits HigherYou're correct. When installed, the # 13322 (visible cross tube) is going to be 20" from the top of the hitch to the ground, where the # 13301 (concealed cross tube) is going to be 18-1/2" from the top of the receiver to the ground; this puts the # 13322 as likely to match the OEM hitch height a little bit closer. It likely stems from the concealed tube hitch compensating a little extra to clear the bumper. We've produced some installation videos of these hitches on similar trucks that...
view full answer... - Availability of 2 Inch Receiver for 2011 Toyota PriusAll the hitches we offer for a Prius are Class I with a 1-1/4 inch receiver. I do know in the past there was a company that offered a 2 inch receiver for a Prius, but it is no longer available. It could be possible to find a used one. Try doing a Google search on 2 inch Receiver for 2011 Toyota Prius, you might have some luck with that. When using a 2 inch receiver on a Prius, there is always the chance that somebody will try to use a hitch accessory that is too heavy for the vehicle....
view full answer... - Tow Package Recommendation for a 2008 Chevy Silverado 1500Sounds like you are looking for everything you would need to tow a travel trailer that weighs 4,800 lbs. First you would need to start with a hitch if you do not have one already. The Curt part # 13322 is the most popular option we offer. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2...
view full answer... - Weight Distribution or Higher Capacity Hitch for 2006 Chevy Silverado 1500 and 5300lb TrailerCurt trailer hitch # 13322 is rated for 600 pounds tongue weight without weight distribution and 1,000 pounds tongue weight with weight distribution. Gross trailer weight is 6,000 pounds weight carrying but 10,000 pounds with weight distribution. If the trailer weighs 5,300 pounds, and tongue weight is typically 10 to 15 percent of the gross trailer weight, that should make the tongue weight between 530 and 795 pounds. This is not including the weight of anything loaded in the truck behind...
view full answer... - Trailer Wiring Mount for Use with Curt Hitch 13322 on a 2004 Chevy Silverado 1500 4 x 4 LSThe Curt hitch part # 13322 does not have a bracket for mounting trailer wiring. Commonly people will use the part # 74682 on trucks like your 2004 Chevy Silverado and drill holes in the lower portion of the bumper to mount the connector. Due to how the hitch is mostly covered by the rear bumper there really isn't a good place to mount the connector on the hitch tube.
view full answer... - M14 Bolts for Trailer Hitch 13322 Will Not Thread Into Weld Nuts on a 1999 Chevy SilveradoThe likely problem is that the weld nuts on your 1999 Chevy Silverado have corrosion and road grime in them and will need to be cleaned out prior to threading the bolts in. This actually comes up a lot on any vehicle that has seen at least one winter. I have included a link to are help article that explains how to clean out the weld nuts so you can install the bolts. You do not want to force the bolts in because you could end up breaking a weld nut. And you would not want to use a different...
view full answer... - Stainless Steel Hitch Lock for Flash Ball Mount in Curt Hitch 13322We have the stainless steel etrailer hitch lock part # e98882 which would work great with the ball mount # DTBM4200 in the Curt hitch part # 13322.
view full answer... - Dimensions of Curt Class III Receiver Hitch # 13322 to Clear Aftermarket Exhaust of 1999 SiveradoMy Curt representative tells me that the distance from the top of the mounting flange where it would mount to the underside of the frame member to the top of the crossbar where it meets the side flange would be 2-3/4 inches. The crossbar is 2-1/2 inch round tube stock, so the distance from the top of the mounting flange to the underside of the crossbar at the side flange is 5-1/4 inches. The drop of the hitch, which is the distance from the mounting flange to the top of the crossbar at...
view full answer...
- Replacement Hitch for 2011 Chevrolet SilveradoThe pin hole in a hitch can round out, and though it is not a common problem it is something that we have seen happen. In terms of the difference in hitches for your 2011 Chevy Silverado, the higher the class rating the more heavily constructed the hitch is. The Curt class V # C15323, for example, weighs 67 lbs while the class IV # 14301 weighs 53 lbs and the class III # 13322 weighs 31 lbs. That means the thickest material is going to be on the class V, but that may be overkill; I recommend...
view full answer... - Will the Curt Trailer Hitch Receiver 13322 Fit a 2001 Chevy Silverado Step SideThe Curt Trailer Hitch Receiver part # 13322 is listed as a fit for a 2001 Chevrolet Silverado (All Models). The stepside and fleetside models have the same frame so this will not be an issue. I don't have any reference to the frame hanger brackets you mentioned but I have attached for you below a photo of how the trailer hitch installs on the frame.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Robert C
Test Fit:
Ryan G
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott B.
9/4/2018
Still in great shape. Cant say enough about etrailer.com. Great product. Great people.