Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(57 reviews)
Price: $215.45
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13301
Retail:$308.95
Our Price: $215.45
You Save: $93.50
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (57)
- Q & A (0)
- Photos
CURT Trailer Hitch - 13301
- Class III
- 2 Inch Hitch
- 6000 lbs GTW
- Concealed Cross Tube
- CURT
- 600 lbs TW
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13301 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2008 - 2013 GMC Sierra 1500
- 2007 - 2007 GMC Sierra New Body 1500
- 2008 - 2013 Chevrolet Silverado 1500
- 2007 - 2007 Chevrolet Silverado New Body 1500
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13301
Average Customer Rating: 4.8 out of 5 stars (57 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Jeff 02/11/2023
The Curt is a sturdy hitch and exact fit
by: James10/07/2023
Ordered a class 4 over the phone but received this one instead. Guess it was a simple miscommunication because I was torn between this product and a class 4. Great Hitch though, took 15min to remove old and install new with impact. Shipped super quick!
by: Chris 06/10/2023
As for the hitch it is top of the line. Far superior to the O.E.M. Install was very easy. I had a helper due to the weight when lining up bolts. Probably a jack positioned correctly would do the job. I did not have to lower the spare, all the bolt holes lined up perfectly. Getting the old hitch off was a job I don't want to ever do again.
Now as for packaging. Why would you put this heavy piece of steel in a cardboard box with no support or cushioning at all. I helped UPS with the box because it was literally falling apart with the hitch hanging out. This was not the fault of UPS but the shipper. The hardware package was taped to the hitch so nothing was lost. The hitch just suffered some loss of paint and a few scratches.
by: Lynne 02/27/2024
Chevrolet Silverado
Lined up perfectly to the Silverado. Easy install.
by: Sam08/07/2012
Arrived on time! Shipping grade A+
Installed easily! Installation difficulty (not difficult)
Installed in 15 minutes, did not even break a sweat.
Did NOT have to remove the spare tire.
THANK YOU ! I saved over $300.00 doing it myself.
//Sam Raymer
LaGrange, KY
by: Aaron 07/21/2022
Easy install and product as advertised. Pulling my boat today for a test. The hardest part was getting the old bolts off. Thanks!
Aaron
7/24/2023
still works as expected after roughly a year.
by: Randy 08/10/2023
2011 Chevrolet Silverado
Fit perfect, everything lined up,didn't have to remove the spare.
by: Jim12/17/2017
2008 GMC Sierra
Hitch was as described, was delivered in good condition and in a timely fashion. etrailer.com called me with a question about my online order and they were very polite and professional. After researching several other sites I settled on etrailer.com as they had the best selection, prices and free delivery. My hitch is now installed on my truck and I am very pleased with the results. Overall this has been an excellent experience. Note that this was to replace an existing GM factory installed cl. III hitch that was disintegrating due to rust. The Curt hitch is a much heavier duty hitch than the factory original and I expect it will last much longer.
Jim
12/18/2018
I was happy with the hitch but traded the truck in July and had to let hitch go with it.
by: Ian 04/06/2023
It’s been one year and my trailer is still connected . That is a very good thing
by: Tim 11/02/2021
Trailer Hitch bolted right . worked gre at.
Tim S.
11/3/2022
Good Trailer hitch. Was easy to install.
by: Doug 07/06/2023
Works great. Bolted right up. I would purchase again if I need one.
by: Tim 07/17/2022
Very sturdy. Welds are near flawless. Very clean install and clean appearance. Third hitch purchased at e-trailer for three different vehicles. Will remain loyal to e-trailer.
by: David08/28/2019
I recently received a Custom Fit 2" Class III Curt Trailer Hitch Receiver for my 2012 Chevy Silverado from etrailer.com. This product is everything and more the website promised! I am very impressed with the quality of the unit and the price was very competitive. Additionally, installation was a breeze as promised. The brackets lined up perfectly with holes in the truck's frame rails and all needed hardware was supplied and worked perfectly. I have never installed a hitch before and I accomplished the task in a little under an hour start to finish! etrailer.com delivered as promised and I will surely be a returning customer. Thank you!
by: Kenneth G.06/12/2014
2008 Chevrolet Silverado
Product arrived quickly, the only issue was I ordered 2 plugs also and they were boxed on the inside with the hitch. The box with the plugs was open and the plugs were laying in the bottom of the hitch box. I suggest putting this box inside the arms of the hitch that way the weight of the hitch will not crush this smaller box. The plugs were fine, hitch bolted up perfect. I have bought about 3 hitches from etrailer and have nothing but good things to say.
by: Peter D10/22/2020
This trailer hitch installed easily on my 2013 Silverado 1500 long bed 2wd. The holes all lined up and the instructions were spot on. Kudos to Curt. I decided to get this hitch, even though it's more expensive than others with similar ratings, because it attaches to the vehicle frame with six screws instead of four. Also the cross tube is well hidden because it is above the receiver. A very nice hitch.
by: Wes 08/26/2018
I placed my order online, which was very easy. I received my hitch very fast, and the installation was a snap. With air tools, i was ready to tow in about 15 minutes. If you're looking for a great hitch at a great price, etrailer is the place to shop!
by: KQ12/20/2018
2013 Chevrolet Silverado
Very good hitch. Simple and easy to install. It has been in constant use since installation and works well with no issues. I would buy from etrailer.com again. They are a trustworthy business.
by: David 07/25/2020
2011 Chevrolet Silverado
Trailer hitch for 2011 silverado -
Put the hitch on today. The fit was like factory equipment! My original factory hitch developed a rust hole. Also, I felt the price was very reasonable! Thanks for a nice product.
by: Albert 04/13/2023
Great product fit perfect.
by: Blake06/27/2015
2011 Chevrolet Silverado
Ordered the hitch and wiring plug, After I already checked out I forgot to have shipping expedited. I emailed Etrailer and in no time at all they up dated my order and it got here faster.
Thanks to all who helped!
Blake
by: Bill T.06/04/2018
2013 Chevrolet Silverado
Very well pleased. Trailer hitch arrived in two days ! I put it on my truck myself and it fit great. Wiring harness fit well also. Thank you for the quick service.
by: SDA05/08/2021
I had originally purchased an incorrect hitch. One phone call to your rep and the correct hitch was on the way, before I had a chance to return the incorrect one. Easy installation. Looks great on the truck.
by: Richard 04/08/2023
Fit Perfect
by: Robert 05/11/2020
Product doing great holding strong, product service representative was great to work with and new the product well. Easy installation. Will purchase from Etrailer again. Thanks
by: Lee03/24/2018
2009 Chevrolet Silverado
Very happy with the service, came the day it was promised, best price out there, box didn't hold up to shipping, but very little damage to hitch. Very satisfied.
25
57
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Will the Curt Class III Reciever Hitch # 13031 Fit on a 2007 Chevrolet C1500 SilveradoIf you have the 2007 Chevrolet Silverado New Body style, then the Curt Class III Receiver Hitch, item # 13301, that you mentioned will fit on your vehicle. If you have the 2007 Chevrolet Silverado Classic body style the hitch you will need is the Curt Class III Square Tube Receiver Hitch, item # 13332, for your vehicle. This hitch has the same basic construction and the same weight capacities as the # 13301 hitch. In 2007 the Silverado was built in both body styles for an extended period,...
view full answer...
- Hitch Recommendation for a 2007 Chevy Silverado 2500HD with 2-1/2 inch Hitch OpeningFor your 2007 Chevy Silverado 2500HD you would want the Curt hitch part # C15703 as it has been confirmed to fit your vehicle and has a 2-1/2 inch hitch opening like you said you were interested in. I attached a install video plus a link to a page that has all of the ball mounts we carry that would fit the hitch. You would want to first determine the amount of rise/drop you would need to tow your trailer level and then select it from the filters on the link.
view full answer... - How to Extend Trailer Safety Chains that are Too Short to Reach Loops in Hitch ReceiverIf you want to just add on some sort of extension you can use Safety Chain Quick Link # C82932 which has a working load limit of 3300-lbs. This will give you about 3-inches additional length. Ideally trailer safety chains will be one continuous chain, without additional connection points or extenders. The best solution is to replace your safety chains with new ones of the appropriate rating and length, such as TowReady # TR63035 (sold as a single piece) which is 72-inches long and that...
view full answer... - Correct Curt Class III Trailer Hitch for a 2008 Chevy Silverado 1500Yes, the Curt Trailer Hitch Receiver part # 13339 will fit a 2008 Chevrolet Silverado 1500 (All Models Including LT). It features a no-drill install, simply lift into placed and secure with provided hardware. I will say that this model is designed for deep step bumpers, if you just have a standard bumper the Curt Trailer Hitch Receiver part # 13301 would sit a little tighter under the bumper.
view full answer... - Adding a Ball to the Bumper and Accessing Trailer Wiring on a 2014 Chevy Silverado 1500First, you will want to check the owners manual for the truck for the bumper towing capacity. Many bumpers are only rated for 3500 pounds but the owners manual should say. But don't confuse the truck's towing capacity with the bumper capacity. You will need to also make sure that there is an opening that goes all the way through the bumper to install a ball. Most bumpers that have this feature will have a cap over the hole that you can pry out with a flat head screwdriver. If it's stuck...
view full answer... - 7-Way Trailer Wiring Recommendation for 2018 Chevy SilveradoWhat you'd want is the 7-way wiring kit part # HM40975 which is designed to fit the cut out at the bumper of your 2018 Chevy Silverado 1500. The round connector or your truck will plug right into this adapter and the adapter fits the cut out of your truck perfectly. Check out the install video I attached for more info as well.
view full answer... - High Capacity Trailer Hitch Recommendation for a 2010 Chevy Silverado 1500First, Curt hitch 15522 is going to be replaced with a new model and design so the old hitch will be obsoleted at some point. If the factory hitch is bolted on then you can install a different hitch. If it is welded on you will not be able to use a different hitch. For the most capacity then use Curt hitch # C15323. It is rated for 16,000 pounds gross trailer weight. It also has the square tube design. I have linked instructions for you. Since these ratings exceed the ability of your...
view full answer... - Does Curt Hitch # 13301 Fit 2008 Chevy Silverado 1500Yes, the Curt hitch part # 13301 is a fit for your 2008 Chevy Silverado 1500.
view full answer... - Does Curt Trailer Hitch for GM Trucks Include HardwareYes, all of the hardware is included with the # 13301 hitch. The only thing that isn't is on 2014 and newer trucks there's a light duty bumper hitch that needs to be removed and some of the washers for that need to be reinstalled after it's removed. Those washers are reused and do not come with the hitch but they're already on the truck so if yours is this new then you have them.
view full answer... - Curt Class III Trailer Hitch that Fits 2007 Chevy Silverado 1500 New BodyThe Curt hitch part # 13339 that you referenced is not a confirmed fit for your 2007 Chevy Silverado 1500 New Body so for a similar hitch that does fit you'd want the part # 13301. The # 13339 that you referenced fits the higher payload versions of your truck that also have a deep drop bumper.
view full answer... - Is The Curt Trailer Hitch Receiver 13301 A Fit For A 2006 Chevrolet SilveradoWhile we do have a solution for you, the Curt Trailer Hitch Receiver # 13301 is designed for new generation models starting in 2007. My recommendation is the etrailer.com Trailer Hitch Receiver Class III - 2" # e98849 for your 2006 Silverado because the matte black finish tends to be more scratch resistant than the glossy finishes like that of the Curt. Included are video resources for both.
view full answer... - Which Curt Hitch for 2009 GMC Sierra 1500 Sits HigherYou're correct. When installed, the # 13322 (visible cross tube) is going to be 20" from the top of the hitch to the ground, where the # 13301 (concealed cross tube) is going to be 18-1/2" from the top of the receiver to the ground; this puts the # 13322 as likely to match the OEM hitch height a little bit closer. It likely stems from the concealed tube hitch compensating a little extra to clear the bumper. We've produced some installation videos of these hitches on similar trucks that...
view full answer... - Vehicle Fit List for Curt Trailer Hitch Receiver # 13301I'm not sure what dimensions you're needing for the Curt Trailer Hitch Receiver # 13301, but what I can say is that this is a custom fit hitch receiver for the following pickups: 2008 - 2013 GMC Sierra 1500 2007 - 2007 GMC Sierra New Body 1500 2008 - 2013 Chevrolet Silverado 1500 2007 - 2007 Chevrolet Silverado New Body 1500 If you have a different vehicle then let me know the year/make/model and I can recommend a trailer hitch for your application. Attached is an installation video of...
view full answer... - Difference Between Curt Hitches 13322 and 13301 for 2011 Chevy SilveradoThe difference between the Curt hitch part # 13322 and the # 13301 that you referenced is an aesthetic one mainly. The design of the # 13301 is that the hitch tube is welded to the bottom of the cross tube which means that from the rear of the vehicle you'd only see the hitch opening. This is what I'd go with if it was me. The # 13322 instead has the hitch opening welded to the front of the hitch tube which means the cross tube is going to be visible from the rear. This hitch's crosstube...
view full answer... - Will the Curt Trailer Hitch Receiver # 13301 Work on 2011 GMC Sierra 1500Yes, I checked with Curt and this Curt Trailer Hitch Receiver, part # 13301, is a confirmed fit for your 2011 GMC Sierra 1500. I attached installation instructions for you to check out. You may be interested in the following products to complete your towing setup: Ball Mount 2-3/4 inch Rise or 4 inch Drop # 2753 Hitch Ball with 2 inch Diameter and Medium Shank # 19247 Tow Ready Custom Fit Vehicle Wiring # 118384 (instructions attached)
view full answer... - Is Factory Bumper Hitch Removed to Install Curt Class III Hitch # 13301 on 2014 Chevrolet SilveradoThe Curt Class III Hitch for your 2014 Chevrolet Silverado 1500, part # 13301, does require removal of the OEM light-duty bumper hitch. Both hitches cannot be installed at one time. I have linked the installation instructions; I have also included a video showing installation of the Curt 13301 on a 2013 Silverado. Also provided are two articles that may be helpful; one covers general installation tips and the other specifically covers the process for cleaning out weld nuts prior to hitch...
view full answer... - Correct Curt Trailer Hitch for 2002 Chevy Suburabn and 2011 Chevy SilveradoThe Curt Trailer Hitch Receiver # 13932 will fit older models of Chevy pickups so for your 2002 Chevy Suburban and 2011 Chevy Silverado you'll need different trailer hitches: 2002 Chevy Suburban - Curt # C13402 2011 Chevy Silverado - Curt # 13301 for 1500 Model or Curt # C13071 for 2500/3500 Model Installation instructions have been linked for both hitches for you to check out.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Ryan G
Video by:
Andrew K
Written by:
Lindsey S
Expert Research:
Robert G
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Joshua S
Video Edited:
Dustin K
Video Edited:
Sue W
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steamdaddy
2/12/2024
I am happy with my hitch. it was easy to install