B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"
Item # BWHDRH25122
Our Price: $329.00
Confirmed to Fit
2003 GMC Sierra
3500 - Cab and Chassis
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (165)
- Q & A (0)
- Photos
2003 GMC Sierra - B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"
- 2 Inch Hitch
- Class V
- 16000
- Visible Cross Tube
- B and W
- 1600
- 16000 lbs WD GTW
- 1600 lbs WD TW
- Custom Fit Hitch
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.
Features:
- Custom-fit trailer hitch lets you tow a trailer with your vehicle
- Bolt-on installation - no welding required
- Interlocking, 3-piece design
- Grade 8 mounting hardware and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- High-gloss, black powder coat finish resists corrosion
- Safety chain loops built into heavy-duty steel gusset
- Sturdy steel construction
- Electrical bracket for 7-way trailer connector included
- Ball mount, pin and clip sold separately
- Made in the USA
Specs:
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum GTW when used with weight distribution: 16,000 lbs
- Maximum tongue weight: 1,600 lbs
- Maximum TW when used with weight distribution: 1,600 lbs
- Maximum gross trailer weight: 16,000 lbs
- Lifetime limited warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
HDRH25122 B and W Heavy-Duty Class 5 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Tech Tip
Hitch is designed for vehicles with a 5-1/2 inch drop. Hitch does not fit on models with dual tanks. Drilling required for installation , Product fits vehicles with frame that is 34" wide outside to outside
California residents: click here
Complete Towing Package for 2003 GMC Sierra
Retail:$444.09
Package Price:$420.62
2003 GMC Sierra Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Sierra Trailer Hitch Accessories
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Too difficult to install
Customer Reviews
B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2" - BWHDRH25122
Average Customer Rating: 4.8 out of 5 stars (165 Customer Reviews)
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.by: Gary 05/24/2024
Two holes to drill, bolted right up. I did not open package for about six months after receipt. I was short two pieces of hardware. Contacted B&W, parts were in the mail that day. This is the second hitch I have ordered. No problems with either one!!
by: Daniel12/27/2023
Absolutely love the install process and the look of this hitch. I installed it on my 1989 V30 Crew Cab. Took all of 10 minutes.
My only complaint is how it arrived to my doorstep. Not sure if it’s how these things are shipped or if Shipping dropped the ball but it seems like an easy way to lose parts if you ask me. Only stating this in hopes Etrailer can make a note of it happening.
by: Brian04/09/2023
Hitch worked out great for my project, 1966 ford f250 body on a 1976 ford f250 4x4 highboy frame/chassis. Drilled all new holes to mount to frame. I had concerns because I had to shorten the frame 2 inches to accommodate the 66 long bed and factor original bumper. Thank you for the photos and dimensions of drop for the receiver tube. Hitch looks great and doesn’t hang to low.
by: Alan03/11/2023
1997 Ford F-250 and F-350 Heavy Duty
Had to trim the mounting ears about 3/16” of an inch on either side to clear bumper mounts. Seems very sturdy and well made. Looks good and doesn’t hang down too low on a 97 f250 with standard rear bumper.
by: Mark 05/16/2024
1971 Ford F-100, F-150, F-250, F-350
Excellent heavy duty hitch. Fit perfect and was easy to install. Fast service.
by: Cal12/05/2019
GMC
I am very impressed with this product. The construction on the class 5 hitch is something to brag about! Very well constructed and made. The welds and craftsmanship looks great. The only mods I had to do, the center holes on the frame were off about a 1/4 inch, it’s was no problem to drill out with the right tools. It is well worth the time to install, took me about and hour. This is why I’m always proud to buy products made in the USA [Thumbs up] The quality of the B&W hitch is unmatched. The process and shipment was fast as well.
1983 GMC K2500
by: Joe 12/08/2023
I’ve hauled lots of hay with mine no issues. Towed the cattle trailer a few times and it worked great. Highly recommend this hitch
by: Steve 09/15/2023
2016 Ford F-250 Super Duty
Excellent quality American made hitch, installation went very smoothly onto my 1973 F250 truck. I particularly liked the modular bolt together design of the hitch this made the installation go easier (since it was lighter and less awkward).
I installed inside, then put the back piece into the mounted side and then installed the second side.
The photos are not the best, but hitch tucks up nice and tight to the bumper. Since the capacity is 16,000 lbs, it will definitely handle the new 28' enclosed trailer with ease (close to 10,000 lbs loaded).
by: Steve S.05/12/2014
1968 Ford F-100
Very good quality American made item. It fit my 1968 Ford F-100 perfect. It sits right below my new Fey step bumper and I can't even see it except for the square receiver hole.
Steve S.
5/12/2015
Used it 4 times last year to pull my 25 foot Airstream using an equalizer hitch. Still works great!
by: John04/09/2018
1984 Chevrolet C/K Series Pickup
I ordered this hitch for my 84 Chevy D30 military truck. After a few modifications to the existing mounting brackets for the tow hooks and the rear bumper I installed the new hitch assembley. Make sure you loose install all bolts first before tightening. Tighten new hitch assembly last. One of the most difficult parts is getting the Pindel hitch bolts lined up. I would suggest a good tapered line up bar.
by: Austin E.11/22/2018
1986 Chevrolet C/K Series Pickup
Great hitch, I didn’t even have to drill one hole in the frame on my 1988 GMC v3500, it bolted right in. The receiver tucked under the bumper very good
The only thing I didn’t like was the trailer wiring plug bracket because it didn’t accommodate the new style 7-way and 4-way plug that come on the new Chevy trucks
by: Charles12/18/2022
Fit good on my 88 f250 install was pretty easy. Was worried about it sticking out to far where my truck has a roll pan on it but actually fits pretty good with the roll pan
by: Joe01/25/2023
Awesome product! Just had to drill the center holes on both sides through the frame and it bolted right in. The tracking is by far the best of any online purchase I’ve ever made. Great job guys keep it up
by: Marshall09/30/2020
Awesome, delivered on scheduled and installed the same day with ease! High quality materials and easy to follow instructions. The license plate cut out was from the old hitch. The B&W trailer hitch was perfect fit no cutting necessary.
by: Uwe05/20/2024
1976 GMC C/K Series Pickup
Fit good as advertised
by: Hank 10/07/2023
Instructions sucked, but I figured it out. Works perfectly, thanks
by: Andrew06/03/2021
It is a great reciver hitch. Bolted right up to my 1985 chevy k30. I tow all the time so a good strong hitch is important.
by: Nick R.10/01/2015
I couldn't find what i was looking for anywhere else and e trailer had exactly what i wwanted. I am extremely please with the customer service I received and the product. I will be using etrailer first from now on thank you etrailer.
Nick R.
by: Joshua07/04/2021
Hitch fit perfectly on my 1989 Dodge W150! Took less than an hour to install, only had to drill 2 holes to fasten it to the frame.
by: Tyler 01/02/2024
1995 Ford F-350 Super Duty
worked perfect on a 95 f350 with a stock hight bumper.
by: Gordon12/10/2023
Very sturdy and looks great. I installed it myself laying on cardboard over my gravel driveway. It ws very tight with the drilling and all but if I, a 62 year old geezer can do it, so can you!
by: Keith03/26/2022
Perfect fit on my chevy 3500 cab and chassis pickup. was missing a few washers but found some to finish install... fast shipping ordered on 3/16 received it 3/22
by: Cesar 04/07/2023
I’m 100% satisfied. Dianna A knew exactly what I needed and what I was talking about when I was explaining my needs. The B&W hitch receiver is awesome.
by: Andy04/17/2018
1985 Chevrolet C/K Series Pickup
I just got this hitch today in the mail, it's awesome! Extremely well built and sturdy and the etrailer box kept it safe no dings or dents even. On a regular Chevy truck it will fit perfectly and installation is very straightforward but I would recommend having a friend help hold it while you get two bolts started. I installed it on a 85 Chevy k30 m1008 military truck. On these trucks people have problems with the shackle mounts fitting with a hitch and this one is no different. Some modifications will be needed to the shackle mounts, or the shackle mounts can be removed.
Andy
4/18/2019
1 year later and this hitch is everything I said it was in the first review. The powder coating is still in great shape although this truck does not see Ohios lovely salted winter roads.
by: Kevin 09/30/2023
Outstanding Customer service. Very very helpful.
25
165
Show More Reviews
See what our Experts say about this B and W Trailer Hitch
- Which Trailer Hitch for a 1996 Ford F-250/F-350 Fits Tightest Under the BumperThe trailer hitch (Curt, Draw-Tite, B&W) for a 1996 Ford F-250/F-350 that fits closest to the bottom of the bumper is the B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25122 which measures 5" from the top of the flange to the top of the receiver tube. The Curt part # C15300 measures 5-1/2" and the Draw-Tite part # DT45502 5-1/4".
view full answer... - Highest Rated Trailer Hitch for 1984 Chevy K10 Short Bed with Step Bumper We do have trailer hitches available for your 1984 Chevy K10, however the B&W Class V Trailer Hitch Receiver # BWHDRH25122 that you referenced is only a fit for the long bed model of your truck and will not fit your short bed K10. The highest rated hitch we have available for your Chevy K10 with the short bed and factory step bumper is the Curt Class IV # C14082. The hitch will work perfectly as long as your truck has a 34 inch frame width (from outside to outside). This custom hitch...
view full answer... - Recommended Trailer Hitch for 1988 Chevrolet SuburbanThe B&W Heavy-Duty Trailer Hitch Receiver, part # BWHDRH25122 is designed to only fit Chevrolet C/K Series Pickups and is not a fit for your 88 Suburban, but I do have a hitch that will work for you. I recommend the Draw-Tite Trailer Hitch, part # 75500. This is a Class lll hitch and it has a 2 inch receiver opening.
view full answer... - Trailer Hitch for a 1997 Ford F-250/F-350 Cab and Chassis ModelFor 1997 a cab and chassis model would have an outside to outside frame width of 34 inches. If that is the case you can use # 13028 which is for the cab and chassis models. Cab and chassis hitches for the 1997 F-250 or F-350 appear in the same list as the regular pickup models so that is probably why you didn't see it. We also have hitch # C14082 for the cab and chassis models. The difference between these hitches is the capacity. Hitch # 13028 is rated for 600 pounds tongue weight and...
view full answer... - Recommended Trailer Hitch Options for 1995 Ford F350We have many different hitches compatible with your truck. The best choice for you will depend on what you're wanting to tow. For lighter duty towing, I'd recommend the Class III hitch, part # 75038. The hitch has a 5000 lb towing/500 lb tongue weight capacity. For a heavier duty Class IV, the Curt # 14001 with its 10000 lb towing and 1000 lb tongue weight capacity would be a good choice. For a higher capacity, B & W offers a Class V with a 2 inch by 2 inch receiver opening, part # BWHDRH25122...
view full answer... - Trailer Hitch Receiver for 1991 Chevrolet 1500 Silverado with Standard BumperYes, as noted in our fit guide the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122 is only a fit for the cab and chassis models with 34 inch frames of 1991 Chevy truck. Assuming you have a standard bumper, the correct trailer hitch for your 1991 Chevy is the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25124. Please keep in mind the aforementioned hitch will not work if you have a Crew Cab.
view full answer... - Trailer Hitches Available for 1988 Dodge Ram PickupThe hitch referenced in your question, Draw-Tite 2-inch model # 13368, does not fit your 1988 Dodge Ram pickup but we do have Draw-Tite and other brands of hitches that are confirmed to work on your 1988 Ram. The correct hitch to use will depend on your pickup's bumper type. Please refer to the linked article. If you click on the linked page you'll see all hitches for all versions of your truck and you'll want to select your bumper type using the drop-down menu tool. Select your bumper...
view full answer... - Recommended Trailer Hitch Receiver For a 1984 Chevy K20 Pickup To Fit Without a Rear BumperI recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 for your 1984 Chevrolet K20 as this is a universal receiver you will be able to bolt/weld on your truck where you prefer it on the frame. You are able to cut the 44" wide cross tube to best fit where you want on the frame. All our custom fit receivers like the B&W # BWHDRH25122 are designed to fit with a factory bumper and will stick out past the truck.
view full answer... - Trailer Hitch for a 1998 Fleetwood Pace Arrow to Tow a 6,000 Pound TrailerYou are going to need to have a hitch welded to the frame of your 1998 Fleetwood Pace Arrow motor home by a qualified professional welder. The bolt-on hitches we have for RVs are not rated high enough for a gross trailer weight of 6,000 pounds. I have included a link to the right to the weld-on truck hitches that we carry. You will also need to check the owners manual for the RV to make sure it is rated high enough for 6,000 pounds gross trailer weight.
view full answer... - Recommended Trailer Hitch With Extension For 1997 Ford F-250 With Camper And Boat TrailerYes. The TorkLift SuperHitch is the only brand that accepts the custom fram mounted camper tie downs. For your 1997 Ford F-250, the hitch receiver you would need is the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers # TLF1000. You would not need to modify your exhaust or move your spare, you would only need to temporarily move for installation. The only 21 inch extension that will not reduce a hitch capacity by 50% is the TorkLift SuperTruss...
view full answer... - Recommended Trailer Hitch Receiver for 1975 GMC C25 Sierra GrandeSince the Draw-Tite Ultra Frame Class IV Trailer Hitch Receiver # 41938 isn't a fit for your 1975 GMC C25 because of the spacing, the best bet is to look another hitch. The Draw-Tite Ultra Frame Class V # 41947 is a confirmed fit and also has a 2 inch hitch receiver opening. It also has a maximum GTW of 15,000 pounds. Another option is the B&W Heavy-Duty Class V # BWHDRH25122 which has a GTW of 16,000 pounds. I've attached an install video of this hitch on a 1986 Chevy just to give...
view full answer... - Available RV Hitch for 2017 Coachman Mirada Class A Motorhome on Ford F-53 ChassisAll of the RV-rated trailer hitches we offer are the 2-inch size and the highest-rated among them are the adjustable frame-mount types like Curt # C13701. This hitch offers 2-inches of drop for its receiver tube to allow for better clearance with the RV exterior. The B&W custom hitch you referenced, part # BWHDRH25122, is not a fit for your F-53-based Mirada and only adjustable universal-fit hitches like the Curt BWHDRH25122are available. The Curt hitch is rated for 5K GTW and it can be...
view full answer... - Will B&W Trailer Hitch 40050 Fit 1970 Ford F-250?The B&W Trailer Hitch # BWHDRH25122 is a confirmed fit for a 1970 Ford F-250 pickup with a standard or step bumper, regardless of if it is a 4WD or 2WD, and is designed to allow fits for both 34 and 37-1/2 inch frames.
view full answer... - Mounting Hole Spacing of B&W Heavy-Duty Trailer Hitch Reciver # BWHDRH25122It looks like you're asking about the B&W Heavy-Duty Trailer Hitch Receiver, part # BWHDRH25122, for your 1996 Ford F-150. You didn't say exactly which dimensions you're looking for but I went out to the warehouse and measured the mounting hole spacing. If there's another measurement you'd like just let me know what it is. From center on center the mounting holes towards the front of the truck to the center holes is about 11-3/8 inches. From the center hole to the hole nearest the rear...
view full answer...
- High Capacity Trailer Hitch for 1995 Chevy C/K 3500 SilveradoThe B and W Hitch part # BWHDRH25122 would fit your 1995 Chevy Silverado 3500 if it was built on a cab and chassis model. Which easy way to determine this is to measure the truck frame from outside to outside. If this measurement is 34 inches then you do have a cab and chassis model and this hitch fits. If you don't have a cab and chassis model B and W has the hitch part # BWHDRH25124 that's a fit instead.
view full answer... - Would the B and W Hitch part # BWHDRH25122 Fit Truck with 34 inch Wide Trailer Frame34 inch frame widths are pretty common cab and chassis trucks. The B and W Hitch part # BWHDRH25122 that you referenced is designed to fit cab and chassis trucks with a 34 inch width measured from outside to outside on trailer frames. If you measured your truck frame and it measures 34 inches from outside to outside the mounting brackets of the part # BWHDRH25122 would be positioned correctly. You most likely would need to drill holes in the frame to get the hitch to bolt up.
view full answer... - Trailer Hitch for a Champion Crusader Shuttle BusFor a Crusader Shuttle Bus, there is not a custom-fitted hitch, so a universal hitch will be the way to go. A good weld-on hitch is the Class V Curt, part # 15901. This has a 15,000-lb gross towing weight capacity and a 1500-lb gross tongue weight. It can fit frames between 18" and 43.88". Your shuttle bus does seem to have a large bumper, so you may want to look into a hitch with a longer receiver. Another Curt option is the RV hitch, part # 13703. This can be a bolt-on or weld-on hitch,...
view full answer... - Ball Mount Compatible With An Older Putnam Hitch That Uses A 3/4 Inch Hitch PinI took a look at what we have, and I was able to find the: -Gen-Y 2-Ball Mount for 2-1/2" Hitch Receivers # 325-GH-064. This ball mount will use the larger 3/4" hitch pin # 58388 that you mentioned you have, however this ball mount is designed to fit into 3" x 3" trailer hitch receivers. If your receiver opening is smaller, you can use the Curt Hitch Receiver Reducer Sleeves # C45408. This reducer sleeve will allow you to adapt the ball mount to your 2-1/2" or 2" receiver opening. The...
view full answer... - Can I Install Trailer Hitch Upside Down on 1972 Dodge Full Size PickupWe have several trailer hitches that are a confirmed fit for your 1972 Dodge Full Size Pickup. I have included a link to all of the trailer hitches that are a confirmed fit. The B & W trailer hitch, part # BWHDRH25122, is the only hitch that does not require drilling for installation. I spoke with my contact at B & W and he said they do not recommend their hitches be installed upside down because they are not designed and tested that way. An adjustable ball mount, like # RP21141, could...
view full answer... - Class V Trailer Hitch for 1972 Ford F250 with Barden BumperI am unfamiliar with the Barden Bumper and in my research, I could not find any specific information regarding the Barden Bumper. Our trailer hitches are not tested with aftermarket bumpers. We have two bumpers that have been determined to be a fit for your truck with a factory bumper. The # BWHDRH25122 is for standard and step bumpers and the # BWHDRH25198 is for deep drop bumpers. I recommend measuring from your frame to the bottom of your bumper to know how much distance you will need...
view full answer...
- Will B&W Trailer Hitch Fit with Dual Fuel Tanks on a 1992 Ford F-150Hey Robert, thanks for reaching out! You shouldn't have any issues fitting the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122 on your 1992 Ford F-150, but since we haven't performed this installation yet, I recommend checking out the linked video of this hitch on a 1988 F-250 so you can compare it to what you have. We don't have insight into what the dual tank system looks like on your truck, and while it may not be necessary to remove your spare tire for the installation, it will...
view full answer... - Class V Trailer Hitch Recommendation For 1973 Chevrolet C/K PickupThe B&W Heavy-Duty Trailer Hitch Receiver, part # BWHDRH25122, is verified to be a fit if your 1973 Chevrolet C/K Pickup has an 8 foot bed and a standard bumper. This hitch is a Class V hitch and has a 2 inch receiver opening. We have not received any feedback from customers about the hitch not fitting. For a ball mount I recommend part # BWBMHD30010. This mount features a 1 inch rise and 2 inch drop and measures 8-1/2 inches from the center of the hitch pin hole to the center of the ball...
view full answer... - Trailer Hitch that Fits 2006 Chevy Silverado 3500HD with 44 inch Frame WidthThe B and W hitch part # BWHDRH25122 that you referenced only fits the cab and chassis versions of your truck which have a narrower frame width than what you mentioned at 34 inches from outside to outside. So what you'd want is the part # BWHDRH25189 instead which is designed for the truck frame dimensions you have on your 2006 Chevy Silverado 3500HD.
view full answer... - Will B and W Hitch BWHDRH25122 Fit 1977 Ford F-150 with 37 inch Frame WidthA 37 inch wide truck frame like what you have on your 1977 Ford F-150 a very common width so for a hitch the B and W # BWHDRH25122 would work really well. The other common frame width is 34 inch but you only see those on cab and chassis trucks that were sold without a truck bed.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Jared G
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Cal
12/6/2020
Works great ! Strong and durable