To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded, corrosion-resistant Ford Mustang trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Hitch also fits specialty GT models, such as GT/CS "California Special", Shelby GT, and GT500. No drilling required for installation , Exhaust must be temporarily lowered for installation , Slight fascia deformation may occur on some models
California residents: click here
Average Customer Rating: 4.5 out of 5 stars (78 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.Inspite of 3 bare metal places where paint is rubbed off the hitch I would give it 3 stars. Also the plastic caps on the frame ends are missing. I can paint your flaws but I can't replace your missing end caps. Please send me some!!!
I bought this hitch for my 2012 Mustang to tow an extra wheel/tire set and tools to track events, and occasionally a motorcycle, large tools, furniture, a bike rack, etc.. I haven't used it yet, but the hitch seems pretty sturdy. The hitch and hardware combined were just under 20lbs, which is pretty darn good from a performance standpoint. The powder coat isn't perfect but certainly acceptable for a hitch. My only gripe is that the hitch frame brackets on mine were slightly off. The drivers side bracket wasn't quite perpendicular to the frame, so tightening the fastener to the torque specification caused a bit of a deformation on the frame. I'm not too concerned about it, it should still be ok, but it's definitely not ideal. I don't know for sure because my exhaust system isn't in yet, but there does appear to be clearance for most stock and aftermarket mufflers. I do not think there is clearance for quad tip mufflers (such as 13-14 Shelby GT500 mufflers) so be aware of that if you have or would like to add quad tips. Otherwise, it is a fairly discrete hitch that should help make your Mustang much more practical.
I bought the Draw-Tite Sportframe trailer hitch receiver #24863 for my 2014 Mustang so I could haul my mountain fat tire bike around. It's a well built product and is easy to install. My only complaint, and the reason I gave four instead of five stars, is that the bolt fish wires are too short. They could be a little longer so a single install can hang on to them while threading the bolt/washer and feeding it into the frame. Other than that, I am very pleased with the product, customer service, and shipping from etrailer.com!
Check that your spacers have the correct hole shape (round or square).
Ordering was fine. Delivery was on schedule. Checked part quantities all there. Put the car up, dropped the mufflers (no play in pipes so had to unbolt the forward brackets - bit of a pain to put back). Fish the first wire, put on the spacer on the bolt, Doh it has a round hole and the carriage bolts need Square holes to torque against. Ok just need 4 spacers, surely they'll overnight the right ones. Nope, ground UPS for 5 oz. A week later its done.
The hitch fit well. I got away with poor man ramps.
Too bad they would rush the correct spacers.
The hitch receiver is well constructed and after installation fits well and mostly hidden . Installation took about 2.5 hours with another person helping here and there. My only complaint is about fishing the bolts with the provided wires - it is a hit and miss. I could get two of the bolts in place in no time, but the other two took 15-20 min each until I was able to get the wire to make it to the right hole, which was quite frustrating.
Installed on a 2012 Mustang California Special. It fits perfectly! Install was a breeze. Only difficulty was the rear muffler hanger hit the hitch, but bending the hanger was an easy solution. On the creative swearing needed scale of 1-10 where 1 is "how you say it in front of Gramma" and 10 is "how you say it in boot camp", I'd put this at about a 3. Not bad at all, but don't ask Gramma to help.
Shop took less than an hour to install the hitch on my 2013 Mustang GT. I attached my Harmar lift to the hitch. I use the lift to transport my Pride scooter. Combined weight of the lift and scooter are about 185 pounds. The hitch performs beautifully with that load.
my mustang pulls my little trailer with no problems
wires for routing bolts through the frame where too short and not thick enough gage also paint was also chipped in areas from shipping I would give it a 4star
Was originally concerned having a hitch/bike rack on my 2012 Mustang but made the purchase after contacting an Etrailer Tech person. I’m very satisfied with both and as they say, pictures are worth a thousand words!
Instructions were on point. Fits perfectly. Fast delivery. Will definitely do business with etrailer.com again. Recommend to all.
Great hitch. I was impressed by the quality of this hitch. I installed it on my 2013 Mustang GT in about two hours by myself. I could have done it faster with some help though. In fact I would recommend having a helper if at all possible. The install was pretty straight forward. It was a little fiddly getting the wire pulls through but by the second one I was getting the hang of it and numbers three and four took no time at all. If you have acess to a lift use it but I did it all on ramps so it can be done but a lot of it will be laying on your back in ackward positions. Overall not too bad of a job and the trailer hitch isn't bad looking at all. Just the reciever shows and it isn't too noticeable. I was worried about the looks but it's not bad at all. I will be using this hitch for a bike rack and it is perfect for that job. I highly recommend this hitch for light duty applications.
Lee
6/10/2016
Great hitch has performed flawlessly and still looks new.
Here are the photos of newly installed hitch.
Ben
12/3/2014
I have that same modelcolor mustang. The pics look like its very low, almost ready to scrape the ground on a speed bump. Have you had any issues?
Darrel J.
12/9/2014
Ben, Speed bumps are not an issue. When backing into a parking spot with a curb, it touched. On some driveways the hitch will scrape the pavement. Although it really sounds terrible when it happens, it has yet to physically damage anything but my pride.
WOW etrailer Delivered!!! With only 3 days till Christmas, I was shopping Amazon and wasn't happy with my options, so decided to see what turned up when I searched the web. I am SOOOO glad I found etrailer.com. Faster and cheaper than Amazon, my hitch receiver for A MUSTANG arrived in a day and 1/2.... WOW. High quality, perfect fit!
Vaughn D.
12/28/2021
Product has been fantastic, low profile, solid built.
Fitment was great, quality was great . and the install was super easy once you drop the mufflers. Never had any issues with it.
Great hitch! Installation was not the easiest though, as dropping the exhaust was fairly challenging. I had some rusted bolts and ended up needing a professional to drop the exhaust for me, which wasn’t the cheapest. Otherwise, I think installation went just as described in the video. Functionally, the hitch worked great. I used it to mount a bike rack to my mustang.
The ordering process was excellent as good advice and direction were offered by Susan. The hitch Draw Tite 24863 arrived as scheduled and was well packaged. The installation instructions and video were very helpful and the hitch was easily installed. I had hoped to use a 1 1/4 to 2 adapter and use my current 2 inch receiver bike rack with it. Turned out that was not possible because of how low the rack would have been to the ground, this was on a 2014 Mustang. I suggest buying a 1 1/4 rack that has a rise, rather than coming straight back, for use on a Mustang. Overall this has been a very positive experience and I will use e-trailer for future needs.
Fits great, barely visible.
Hitch received arrive in great shape. Well packaged. All hardware included. Had Uhaul tech install it on the 2014 GT CS stock exhaust. Charged 1.8 @ 90.00 dollars a hour. 2 conference calls and I was on my way home.
Leo
1/29/2022
Working great after a year. Would buy again.
I installed this hitch on a 2014 Mustang GT Premium. The fit and finish was excellent, the fishwires worked perfectly and the instructions were precise and clear. Installing the hitch itself was an easy 5-minute job. However, both mufflers need to be removed. This was an exasperating, difficult and time-consuming problem, and reinstalling them with the hitch in place was even worse. This is NOT a problem with the hitch. When everything was back together, it fit perfectly - nothing is touching or rubbing anything else that shouldn't be. The only other caution I have is that the receiver is buried pretty far under and forward of the rear bumper - maybe an extension is a good idea. Overall, a first-rate product.
The hitch looks great installed. The basic concept of the installation is pretty straight forward but if your car is not brand new like the one in the video, it won't be quite that easy. Prying the rubber insulator off was easier than expected. I experienced the first problem undoing the muffler clamp. The bolt head broke right off. I was eventually able to get the stud out of it rusty coffin. When I was finally ready to install the hitch, the backing plates didn't fit through the frame access hole. NOT ONE OF THEM FIT!!!. The backing plates were poorly stamped and very rough. Mine exhibited excess flashing on the sheared edges. I had to use a grinder to clean them up. Access hole diam= .980", backing plates= 1.060"
Lost a leader in the frame, spent a lot of time fishing out the wire ,bolt and nut. Need longer wire.( cheep fix).
The rest of the install was easy and I had a perfect fit.
Looks great, not an obvious ugly attachment which is nice for my beautiful convertible.
The hitch is top notch, just need a nicer hardware package.
Product may be nice, but it was obviously not tested on the 2014 convertible model of Mustang the device purports to fit. The access port holes in this model are not large enough to put the square plates or bolt through. Ended up using a drill to enlarge the holes, the kickback of said drill being enough to injure one the persons installing the trailer hitch.
Also there does not appear to be a way to reattach the lower exhaust bolts after installation as the hitch is too high to get the bolts in and the hitch itself covers the holes.
The person I installed it with has experience with installing several hitches and said it was the hardest to install of any he's had experience with. We ended up losing a plate inside the access port (the fishing wire is always a pain to deal with).
I'm not sure I'd recommend installation of this product by anybody but a professional.
Londyn was a pleasure to work with. So far hitch and bike rack installed but not used yet. Sure they'll be fine. Process from sale to delivery was very good! Realized they also sell wiper blades, so what the heck. Bought for my Acura and Mustang and saved money over my discount auto stores, Auto Zone and Advance Auto. Let me know when you start selling tires! Kidding, but if you do I want a discount for the idea.
My hitch was shipped same day I ordered it. It arrived quickly with no damage. I used my race ramps to do the install. Since I didn't have a helper close by, I centered the hitch on my floor jack and tied it on with some electrical cord. I was able to then roll it into place. Fishing the wires through was a bit challenging at times! Happy with the install. Now I can easily transport my bikes now. Highly recommend Etrailer!
The product arrived promptly as scheduled. I had it installed at a local trailer and hitch company. Installation went without a hitch (no pun intended!). Very pleased with the service from etrailer.com and with the Draw-Tite product.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
10/18/2021
I am sorry to hear about the damage and missing caps. Customer Service will contact you.