Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(115 reviews)
Price: $218.39
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75139
Retail:$342.89
Our Price: $218.39
You Save: $124.50
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (115)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75139
- Class III
- 2 Inch Hitch
- 5000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 500 lbs TW
- 7500 lbs WD GTW
- 750 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 7,500 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 750 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75139 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87601 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 1999 - 2004 Jeep Grand Cherokee
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75139
Average Customer Rating: 4.6 out of 5 stars (115 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: David05/11/2020
The whole experience was great. My receiver was delivered before I expected and the installation was easy. It was a perfect fit. Good job folks!
by: WJ-Owner-4401/29/2022
I did not have any plans to actually haul a trailer so I can't comment yet on how it works to haul a trailer, but I'm sure it will work as is designed...
... However, I purchased it because I became aware of the "Voluntary Recall" from Chrysler because some of the 2003 Jeep grand Cherokees had safety issues because of the potential, that; under certain conditions, when in a rear end collision, in regards to the gas tank, there is a potential for the gas tank getting ruptured and a potentially deadly fire occurring, so I wanted to double-up on preventing that.
I decided it was a necessary preventative measure to get this
'Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" '.
As far as the quality of the actual product, I would give it a 5 star rating, but instead, I gave it a 4 star rating, because of the inadequate packaging it gets shipped in.
I ended up having to get a total of 4 shipped to me for 2 different purchases of this product because of;
1- the 1st one was bent, not so bent that it was obvious, but it just wouldn't bolt-up to the Jeep. I don't know on the 1st one, whether or not it was bent because of a manufacturing issue or from shipping damage. It didn't look bent to the naked eye, but it was.
I measured between the mounting holes and discovered it was almost 2 cm off from being equal at opposing diagonal cross-section measurements. The one that it was replaced with, (the 2nd one), bolted right up with no problems and the diagonal cross-section measurements were much closer to being equal.
2- After the Jeep got rear-ended, I wanted to get another new one to install after the body shop repairs get finished for the same safety reasons mentioned above.
On this 2nd one, which turned into a 3rd then a 4th one because of shipping damage, as with the 1st one, the shipping damage to the packaging was somewhat severe. The hitch was loose inside of the box and flopping around and part of the hitch was protruding outside of the box...
... Because of that, I was concerned that the Receiver Hitch was probably bent out of proper mounting alignment like the 1st one was.
Also, I was not able to get engineering specifications from etrailer.com for the exact measurements between the mounting holes in the Receiver Hitch so I wasn't able to take any measurements to compare. So, just like the 1st one, (the 1st purchase), I returned it for a what would hopefully be an undamaged and not out of alignment or bent replacement, which I did receive. The body shop won't be finished with it for another couple of weeks so I won't know if it bolts up or not, but I'm pretty sure it, like the 2nd one that I got from the 1st purchase order, will bolt-up as it's supposed to.
That being said, I am very glad I did get the Trailer Hitch Receiver the 1st time because I was hit from behind by a low vehicle and I think it prevented a rear end collision caused Gasoline Fire and potential serious injury, or worse from happening.
Also, the Trailer Hitch Receiver will work quite well for hauling any trailer that the Jeep is legally able to haul and it will work well with a Hitch Mounted Wench or with a Receiver Tow Shackle for when I do go on Four-Wheel-Drive Adventures.
Jenny N.
1/31/2022
It sounds like that the side brackets were knocked out of alignment which can happen while in transit to our facility or to you. We do have a FAQ that can assist with moving the side brackets of the hitch back into alignment to allow for installation.
Helpful Links
Wj-owner-44
2/2/2023
Re: Comments It sounds like that the side brackets were knocked out of alignment which can happen while in transit to our facility or to you. We do have a FAQ that can assist with moving the side brackets of the hitch back into alignment to allow for installation. The suggestion that the consumer is supposed to be responsible for flexing back the hitch receiver may work for some, but in my case it definitely was not an option because the way that I would have had to flex in order to realign the mounting would have required a very large amount of force to change the angle, whereas... ...Even if I could put that much force into flexing it, [it] would have required far more than the instructions imply that it would take... ...In my case for the 1st hitch, before the rear end collision, I am very sure that it was a manufacturing issue, however, it could have been bent in shipping, I doubt it though because of the way it was bent. I dont think ping it off of a truck or a loading dock would have had enough force to cause it to bend the way it was bent. Besides that, the product is advertised as ready to bolt-on, not installer may need to modify the the hitch that is supposed to be ready to bolt on in order for it to fit... ...To me, for example, the customer having to modify a product beyond a small amount of filing a mounting hole example, on a ready to bolt on product is unacceptable. That being said, I would recommend the hitch receiver with the caveat of if you have the time to return the 1st one or are going to take your vehicle to a certified mechanic that specializes in hitch receiver installation, such as [online].
by: Chris11/07/2018
2004 Jeep Grand Cherokee
Arrived 3 days after I ordered, 2 days quicker than anticipated. The threaded hole that didn't have a bolt in it required more than penetrating oil and a good brushing. It needed to be tapped. I removed the bumper (5 minute job) and used one of the stock bolts and penetrating oil with an impact gun and worked the bolt in and out, cleaning the threads of the bolt each time. It took about 10 minutes before the bolt went all the way. Then with the bumper still removed, I propped the hitch on my lap while sitting on my mechanics chair, started one bolt, then slide to the other side and started another. I didn't need a helper it was pretty easy. Torqued the 5 bolts as directed in the installation instructions, then reassembled the bumper.
by: Lisa Auckland11/25/2013
We are very happy. It also relieves the worry that initiated purchase. (Jeep dilly dally on recall regarding unprotected gas tank, which is right behind that hitch.) It was easy for my husband to install. Product completely as described and was delivered earlier than expected.
Thank you.
by: Mike 07/21/2023
Super easy installation. Would 100% buy from etrailer again.
by: John W01/04/2019
2004 Jeep Grand Cherokee
Easy to install looks nice good price. Just what I was looking for.
by: Kelvinator06/05/2017
Receiver hitch didn't fit well. Holes didn't line up. Took 4 hrs of brute strength to get it mounted. Not etrailer.com's fault.
Kelvin I.
6/5/2018
Working as it should
by: Dave S.04/17/2017
2002 Jeep Grand Cherokee
The holes matched up! Easy to install yourself in the garage. Directions were clear and easy to understand.
by: Self installed12/22/2022
2001 Jeep Grand Cherokee
Every thing was fine, I did have to use a jack to spread the width so bolt pattern fit (not that hard to do). I was a little concerned about the square spacers. It appeared that I did not need them, bolted up fine without them.
by: Roger02/28/2019
I only received 2 bolts and 2 washers. I did not receive any nuts. I was supposed to receive 5 bolts, 5 nuts, 5 washers and 5 spacers, plus any other hardware needed to install the hitch. Hopefully etrailer will send me the needed hardware when they read this review.
Mike L.
3/1/2019
Actually, the necessary hardware was included. The remainder of the bolts needed are already existing on the vehicle and are to be reused per the instructions. The nuts are already welded into the vehicles frame at the time the vehicle was manufactured. You can see this by checking out the instructions and the install video Ive linked for you.
by: Ron02/11/2018
Jeep Grand Cherokee
Ordered and installed a Draw-Tite custom hitch receiver for a Jeep Grand Cherokee. Order processing and shipping, excellent. Installation was a snap, using available videos takes all the guess work out of installation. Also ordered T one wiring harness to complete the package. These people are great to work with, they bend over backwards to do it right.
by: Earl03/25/2018
2004 Jeep Grand Cherokee
everything went on just like it showed in the video. Love it. Thank you!!!
by: Bill 02/08/2020
The hitch was perfect. Bolted right on to the frame and I use it weekly. No problems at all. etrailer is gre edat.
Bill
2/9/2021
Product is great. Installation was a breeze. Has performed flawlessly since installed.
by: Randolph06/08/2016
2006 Jeep Grand Cherokee
Love the product. Truly. Made the right decision choosing etrailer.
I would note, as many others have, regarding the installation on a 2006 Jeep Grand Cherokee et al., the hitch did not come with ALL the necessary bolts to properly install.
This presented a rather large headache & delay in finally being able to use it. I wish etrailer would've just charged me an extra dollar and put a variety of extra bolts to fit that one bolt hole, which apparently is an anomaly on many Jeeps.
Very happy otherwise. Again, I made a great decision with etrailer.
by: Frank 08/09/2018
Product is as good as described. Easy to install, fit was right on. Thank you.
by: Zachary05/15/2022
Jeep Cherokee
I loved this trailer hitch. I installed it on my jeep gran Cherokee because I needed to tow my boat with it and the jeep didn’t come with a hitch. I would definitely recommend this company in the future!!
by: Terry05/29/2020
2000 Jeep Grand Cherokee
GREAT product! You can't argue with this well designed hitch. In every [online] or etrailer video that I watched, they tell you it's a 2-person job. I did it by myself only because there wasn't anyone around to help! But, sure as shootin' I got in on there. HINT: MAKE SURE the holes in the frame of your Jeep Grand Cherokee are cleaned out and ready to go BEFORE you do anything else. I had to clean the bolt holes and ultimately re-thread them to get the supplied bolts up in there. What a PAIN that was. AND, a day or 2 (or more) before you try to unbolt the existing gas tank shield, liquid wrench or whatever you use, the existing bolts (which you will re-use) because HIGHLY LIKELY they'll be frozen in place. Once all your bolts holes are clean and ready to go, everything else comes easy, EVEN IF you're doing it by yourself. Aloha noho'i ~ ~ ~
by: TS Chicago03/24/2016
I've used eTrailer a few times and have experienced nothing but great results. They are so consistently excellent it's almost eerie. The instillation videos are accurate, the prices are good, the delivery is timely, their products always fit and the bolting on process always seems to perfectly match their difficulty rating. Never a bad surprise, always a smile. If it can get better than that I am not aware of how!
by: Randy03/03/2022
I recieved the box ripped and opened in some places I haven’t looked in the box yet to see if anything is missing I’ll let you know once I open it up and check to make sure everything’s there
Jenny N.
3/11/2022
I will have our Customer Service team reach out to you.
by: Rachelle G06/20/2019
Great product, fast service, all the parts with product and directions made it easy to assemble. Would highly recommend
Rachelle G.
7/24/2020
Great product for the cost, have had no problems at all, highly recommend
by: Bob B.03/12/2017
2004 Jeep Grand Cherokee
I usually do a lot of searching for the best price when buying a product. In this case it was a no brainer. After looking at the etrailer web-site, with all of the helpful information, good reviews, I just purchased from etrailer. Service was great and product was correct. Hitch fit and came with the extra bolts, spacers and washers needed for installation. the reason for 4 stars is because the box came with some holes in it so the hitch paint was scraped off in I few spots. Not a big deal, in Michigan it is impossible to keep a hitch rust free for long, so it is nice to start out with full factory finish. I f I need another hitch, I will deal with etrailer.
by: Troy02/24/2014
The product was exactly as it was suppose to be. The miss was on the installation. On a 4x4 there is a stamped metal skid plate that can be wider than this hitch. And as the hitch slides up around the gas tank, the skid plate might get in the way and could require some encouragement from a floor jack to press the hitch up. Then there is the lovely task of getting all the holes to line up. Now with the skid plate a little narrower, those holes no longer line up with the hitch and chassis. Again, parts from the Auto manufacture are all different and some might not have this problem at all.
by: Walter B06/26/2015
2004 Jeep Grand Cherokee
The trailer hitch fit like a glove and was very easy to install on my jeep. This is the second hitch that I have purchased from etrailer. They provide excellent hitch products and also there shipping is outstanding.
by: Michael06/12/2022
Jeep
Everything about this trailer hitch is awesome, it fit my Jeep perfectly and it is built to withstand all the towing power that I could ask for
by: Larry S.04/28/2014
2001 Jeep Grand Cherokee
I ordered this product due to its ratings and I have seen this brand on a lot of vehicles. I liked the prices offered with a detailed description for each one. I received the item much sooner than the estimated date, which I liked even more. I had someone assigned to my oder to over see my account and keeping me informed as to shipping.
It's seems easy enough to install however, I have not done so as of yet, due to the fact my house is being renovated. As soon as the work is done rest assured, I'll be in the garage installing the hitch.
Can't wait!
Thanks again for the great service,
Larry S.
25
115
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- What is Draw-Tite Trailer Hitch Torque Specs for 1999 Jeep Grand CherokeeThe torque rating for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75139 that you purchased for your 1999 Jeep Grand Cherokee can be found in the linked instructions on this answer page as well as the product page. We usually try to avoid posting torque ratings for hitches just in case the manufacturers changes something with the hardware down the line. Because of this it's always best to check the instructions that came with your hitch.
view full answer... - Parts Needed for 2001 Jeep Grand Cherokee 4.0 liter to Tow 4,000 lb TrailerI looked up the towing capacity of your 2001 Jeep Grand Cherokee 4.0 liter and it can tow up to 5,000 lbs. So a 4,000 lb trailer wouldn't be a problem at all. So for a hitch the Draw Tite part # 75139 would be a great option. It installs easily and has more than enough capacity. Then for trailer wiring the Tekonsha part # 118369 is very reliable and installs easily. Then for a ball mount with a 2 inch ball you'd need the part # C45134 and you'd be set.
view full answer... - Hitch for a 1999 Jeep Grand Cherokee That Does Not Intefere with Spare TireIf you're planning on purchasing a used hitch, be sure to examine it carefully. If the paint is cracked anyhere on the hitch, it could be an indication that the hitch has been damaged or bent. Make sure there isn't excessive corrosion. Surface rust is okay, but if it's eating through the hitch I'd recommend passing on it. The hardware used to attach the hitch to the vehicle is considered a one-time use item only. If the bolts are torqued more than once, they can stretch which weakens them. We...
view full answer... - Will the Draw-Tite Trailer Hitch # 75139 Fit a 2003 Jeep Grand Cherokee 2 Wheel Drive ModelYes, the Draw-Tite trailer hitch # 75139 is designed to fit all models of the 1999 to 2004 jeep Grand Cherokee. I have included a link to the installation instructions for you to view. If you plan on doing some towing I recommend etrailer ball mount kit # 989900 which comes with two ball mounts, two balls, a hitch pin with clip, and a carrying bag. For wiring, there are 2 options. If the vehicle does not have the factory tow package, use # C55369. If it does have the factory tow package...
view full answer... - Recommended Trailer HItch For A 2004 Jeep Grand CherokeeWhen it comes to installing a trailer hitch on your 2004 Jeep Grand Cherokee we will not have a class 4 trailer hitch out there for you. The closest I will have will be The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # 75139. The trailer hitch has a gross towing weight up to 5,000 pounds and has a tongue weight up to 750 pounds . I recommend checking your vehicle's manual to find out what the actual towing capacity is for your vehicle. Per my source depending...
view full answer... - Recommended Trailer Hitch Receiver and Other Parts to Tow a Trailer with a 2003 Jeep Grand CherokeeI'm not sure which hitch receiver you're asking about but there are three that fit your 2003 Jeep Grand Cherokee. We have a Curt Class III, part # 13051, the Draw-Tite, part # 75139 for a Class III or the etrailer # e92AR which is also a class III. The crossmember is visible on all of them. I've linked videos of these hitches being installed for you to take a look at. If you're going to be towing a trailer with your WJ you also need trailer wiring. If you have the factory tow package...
view full answer... - Wiring Harness Installation for 2004 Jeep Grand CherokeeIf you have a factory tow package on your 2004 Jeep Grand Cherokee, installation is a simple quick connect into the existing wiring using something like the # C55381 or # 20135 depending on whether you want a 7 or 4 way pole connector. If you do not have a factory tow package, I recommend the # C55369 which can be connected into your vehicle's brake lights in the rear cargo area. See link below for installation video. We have several hitch options if you do not already have one. I...
view full answer... - Hitch Recommendation for 2004 Jeep Grand Cherokee with Rear Fuel TankWe have had a couple customers come back and say that the Draw Tite hitch part # 75139 is a fit for their Jeep Grand Cherokee like your 2004 model that has the gas tank mounted at the rear.
view full answer...
- Trailer Hitch and Wiring Recommendations for a 2004 Jeep Grand Cherokee with Factory HitchDraw-Tite trailer hitch # 75139 sits just below the rear fascia on a 2004 Jeep Grand Cherokee and would not have the same appearance as the factory Mopar hitch you have now. I have linked a video showing an example installation for you. All of the aftermarket hitches for your Jeep fit this way. If you do go with the Draw-Tite hitch and need some accessories I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a...
view full answer... - Trailer Hitch Plastic Cover for a 2004 Jeep Grand CherokeeFor these hitches, you will see that the plastic skid shield (cover) will remain in place, sandwiched between the hitch and the frame. We have 5 hitches that will fit your vehicle, for your convenience I have provided a link to each of the custom fit hitches we carry. Most of our hitches are made in the USA. Some of the Hidden Hitch models are made in Canada. Keep in mind that when you pick an option that fits your needs you may also need a draw bar, pin & clip, ball, and a wiring harness....
view full answer... - Does the Draw Tite and Curt Hitch for the 2004 Jeep Grand Cherokee Look the Same Once InstalledI went out into our warehouse and measured the distance from the top of the mounting brackets of both hitches down to where the cross tube is on both hitches and found them to both have the same distance of 7-1/2 inches. So basically the Curt Hitch # 13051 and the Draw Tite Hitch # 75139 would hang down the same distance once installed on your 2004 Jeep Grand Cherokee. So if you like how close the Curt hitch installs to the vehicle in the pictures of it, but also like the square cross...
view full answer... - Is there a Hitch that Will Fit a 2001 Jeep Grand Cherokee with 2 Wheel DriveI called Cequent, manufacturer of Hidden and Draw-Tite, and my contact there stated that the Draw-Tite Trailer Hitch, # 75139, is a hitch that has been around for a long time and that in that time, he has never come across any problems with the hitch being used on 2WD or 4WD models. I believe the Draw-Tite Trailer Hitch, # 75139, is your best option. I have included a link to the instructions below.
view full answer... - Does Skid Shield Need to be Removed for Trailer Hitch Install on a 2002 Jeep Grand CherokeeYou shouldn't have to remove the heat shield when installing a Class III trailer hitch like the Draw-Tite # 75139 (which is a sister brand to Reese). I tried looking up a Reese trailer hitch for your 2002 Jeep Grand Cherokee but I wasn't able to find anything. If you can let me know what the part number for your Reese trailer hitch is I can look into it further for you. I have attached an installation video of the Draw-Tite on a 2003 Grand Cherokee as well as the written instructions which...
view full answer...
- What are the Torque Specs for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75139The torque specs for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75139, which fits your 2003 Jeep Grand Cherokee, can be found in the installation details for the trailer hitch. These have been linked for you to reference. Sometimes the manufacturers will change the hardware that comes with the trailer hitch to better accommodate a new model year that the trailer hitch fits so it is always best to reference the instructions directly as new hardware could change the torque specs. I...
view full answer... - Can I Tow More Weight with Draw-Tite Hitch and Weight Distribution System with 2001 Grand CherokeeThe Draw-Tite hitch part # 75139 for the 2001 Jeep Grand Cherokee is rated for 750 lbs of tongue weight with the use of a weight distribution system. You can tow 750 lbs of tongue weight with the Draw-Tite hitch, with a weight distribution system if you are not exceeding the vehicle's Gross Vehicle Weight rating and have a 4.7 liter engine. I found in your owner's manual if the Jeep has a 4.7L engine it can tow up to a 6,500 lb, 30 ft trailer with an upgraded hitch but without that engine...
view full answer... - Trailer Hitch Recommendation for 2004 Jeep Grand Cherokee LaredoThere is a trailer hitch that will fit a 2004 Jeep Grand Cherokee Laredo but the one you mentioned does not fit. Instead I strongly recommend the Draw-Tite # 75139 because of Draw-Tite's strong reputation for making high-quality trailer hitches and because it is a bolt-on installation that will not require drilling into your Jeep's frame to install. This is a Class III hitch with a 2" receiver with a 500 lb tongue weight capacity and 5,000 lb towing capacity. It has a black powder coat...
view full answer...
- Recommended Motorcycle Carrier for 2003 Jeep Grand CherokeeFor your 2003 Jeep Grand Cherokee, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75139 for a trailer hitch receiver to get you started. Then I recommend the etrailer Motorcycle Carrier for 2" Hitches - 500 lbs # e98873 to carry your dirt bike. This carrier has a weight of 58 lbs with a weight capacity of 500 lbs ensuring your trailer hitch receiver is within its limits. I also recommend the # EM31353 tie downs along with the Soft Loops # 06303.
view full answer...
- Does Draw Tite for 2001 Jeep Grand Cherokee Interfere with Fuel LinesThe Draw Tite hitch part # 75139 would not interfere with any fuel lines on your 2001 Jeep Grand Cherokee. Basically the hitch just raises into position and secure it with existing hardware. I attached an install video for the hitch for you to check out as well.
view full answer... - 1999 Jeep Grand Cherokee Hitch RecommendationThe Draw Tite trailer hitch part # 75139 that you referenced has been confirmed as a fit for your 1999 Jeep Cherokee and does not require any fascia or bumper trimming for installation. Check out the install link I attached to see how it installs. The hitch opening will be directly underneath the rear bumper.
view full answer... - Bolt Hole Size on the Draw-Tite Trailer Hitch 75139 for a 2004 Grand CherokeeI went out to the warehouse with the digital caliper # PTW80157 and found that the bolt holes on the Draw-Tite Max-Frame Trailer Hitch Receiver # 75139 for your 2004 Jeep Grand Cherokee have a 0.64" diameter which translates to 41/64". The bolts that come with the trailer hitch are M12 x 1.75" and you may already have some existing if you have the reinforcement bars equipped. If the trailer hitch has already been installed or you don't have the original hardware then you can order new...
view full answer... - Installing the Reese 44092 or Draw-Tite 75139 Trailer Hitch on a 2004 Grand Cherokee Laredo 4x4I reached out to my contact at Cequent (who makes the Draw-Tite and Reese trailer hitches) to see if this was a common problem and he said that it sounds like the Reese trailer hitch you are trying to install on your 2004 Grand Cherokee Laredo 4x4 is part 44092 which is the same as the Draw-Tite # 75139. He said it should fit and that one of the common things that happen when someone is installing this trailer hitch is that they don't have the bolt holes on the trailer hitch aligned properly...
view full answer...
- Is There A Factory Type Hitch For My 2004 Jeep Grand Cherokee?The only hitches we have available for your 2004 Jeep Grand Cherokee are going to be visible below your bumper. Both the Draw-Tite # 75139 and the Curt # 13051. I've included an installation video of both and a picture to give you an idea of what it's going to look like. It kind of blends in with the rear bumper so it isn't blatantly obvious in my opinion. Of the two, I like the Draw-Tite because of the square tube construction.
view full answer...
- Trailer Hitch Clearence for the Draw-Tite Class III Trailer Hitch on a 2000 Jeep Grand CherokeeI went out to the warehouse and measured the Draw-Tite Class III Trailer Hitch, item # 75139 for your 2000 Jeep Grand Cherokee. From the point where the hitch mounting brackets contact the vehicle frame to the top of the hitch receiver the distance is 7-1/8 inches, and the distance from where the hitch mounts to the vehicle frame to the lowest part of the hitch underneath the receiver is 9-3/4 inches. It is hard to give a height measurement from the ground with the many different tire...
view full answer... - Recommended Towing Package for a 2003 Jeep Grand CherokeeTo determine the maximum trailer weight you can tow with your 2003 Jeep Grand Cherokee you will need find both the Gross Combined Weight Rating (GCWR) and the Gross Vehicle Weight (GVW) of your Jeep. This can all be found on the information tag located inside the driver door jamb. If you subtract the Gross Vehicle Weight (GVW) from the (GCWR) that will give you the maximum Gross Trailer Weight (GTW) you can safely tow. In order to tow a trailer with your Jeep, you will need a trailer hitch...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Video by:
Andrew K
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Video Edited:
Joshua S
Test Fit:
Nicholas E
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David
5/12/2021
No problems at all. I use it almost every day and I still like it. These days it’s nice to buy something that works as advertised. Great job guys!