Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
Retail:$415.95
Our Price: $298.37
You Save: $117.58
Confirmed to Fit
1995 Dodge Ram Pickup
Pickup - 6-1/2 Foot Bed - Standard or Step Bumper
Pickup - 8 Foot Bed - Standard or Step Bumper
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (456)
- Q & A (0)
- Photos
1995 Dodge Ram Pickup - Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- 2 Inch Hitch
- Class V
- 16000
- Visible Cross Tube
- CURT
- 2400
- 17000 lbs WD GTW
- 2400 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your Dodge Ram Pickup's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum GTW when used with weight distribution: 17,000 lbs
- Maximum tongue weight: 2,400 lbs
- Maximum TW when used with weight distribution: 2,400 lbs
- Maximum gross trailer weight: 16,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15300 CURT Trailer Hitch Receiver - Custom Fit - Class V Xtra Duty- 2"
Item # C15300
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
17,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
17,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Tech Tip
Bumper may need to be loosened and repositioned upward. Drilling required for installation , Access holes may need to be enlarged by drilling, filing, or rotary tool , Does not fit models with rollpan bumper , Some vehicles may require the use of an aftermarket spare tire repositioner to retain the spare tire under the vehicle
Complete Towing Package for 1995 Dodge Ram Pickup
Retail:$578.23
Package Price:$406.39
1995 Dodge Ram Pickup Owners Who Purchased This Trailer Hitch Also Bought...
Popular Ram Pickup Trailer Hitch Accessories
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" - C15300
Average Customer Rating: 4.8 out of 5 stars (456 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Andrew03/09/2024
Great hitch! Been using this quite a bit. Install wasn’t too bad, drilled the holes and mounted as required. Hauled a 16’ flat trailer load of firewood for about 70 miles numerous times. I’ve also hauled a 6x10 enclosed trailer packed full of sound equipment hundreds of miles. Have also hauled just over a ton of scrap a handful of times. Very robust hitch that has given me zero problems.
by: Jeremy04/08/2024
1984 Ford F-150, F-250, F-350
I am very satisfied with the quality of the product. Very well made, all hardware was included, and instructions were simple. Would recommend an extra set of hands, heavy and awkward to install on your own. I also had a really great experience purchasing through etrailer which was expected. I have ordered through them before and I have ordered again since buying this hitch. Fast delivery.
by: Patrick Thomas01/19/2024
1996 Ford F-250 and F-350
Package came box beat all to hell poor packaging and was bent pretty significantly on the left side mounting plate will probably have to use a jack to get straight no installation instructions the hitch was just put in the box not secured in any way
by: David04/23/2024
1993 Ford F-150
Worked perfectly, came with all hardware and very clear instructions. My only advise is have a set of very good drill bits. My 2nd hitch purchase from etrailer, and both times went great.
by: James G.02/09/2024
Only giving 4 stars do to shipping issues. No fault to Etrailer. The hitch arived with a few days as all their products do. Box was highly damaged but the hitch was unscathed. Altho there was no hardware in the box so i will have to sorce these as im sure they fell out do to all the holse in the box. Therefore inhave not installed yet but I did put it under the truck and it appears it will line up properly and only need to drill the 4 holes that are stated in the instal video on product page.
by: Jcooper05/13/2023
1994 Ford F-250 and F-350
Ordered this receiver hitch and got it in two or three days. Easy to install using my floor jack to raise it in place on my 1994 F-250. For some reason the previous owner had put a class 3 hitch on. Love the hitch and the quick delivery. etrailer has always been my go to shopping
by: A-Aron04/03/2023
1996 Ford F-250 and F-350
With my bumper in the upper position on the brackets this hitch cleared. I was most worried about this as my drw truck has a clearance light below the tailgate. This hitch installed easily as per instructions.
Made in the USA quality!! Thank you very much!!
by: Phil02/24/2024
1996 Ford F-150
Solid hitch but horrible packaging. Entire powder coated finish garbage. etrailer’s solution? $[XX] off or they can send you spray paint, cheap $[XX} Lowe’s spray paint. I should have taken the $[XX]
by: Logan03/04/2024
1998 Dodge Ram Pickup
Hitch is fine, but the instructions for the Dodge pickups are wrong. instructions were poor and had you drill out your frame instead of utilizing the existing holes and aligning the rivets in the frame with the other hole. you do not have to drill any new holes, only enlarge 2 existing holes and everything lines up great.
by: Dan 05/28/2024
Fast delivery and straightforward insta llation.
by: Charles B.06/25/2019
I installed this hitch on a 1991 Dodge W250. It hangs down lower than it needs to for the factory bumper and required drilling the frame to install the hitch. Drilling the frame and the overall installation went well, however there are existing holes that could've been used had the hitch been designed differently. I do understand this hitch is designed for several applications and in that situation it is difficult to make every vehicle a perfect fit. This hitch is very stout, I like the one piece design and the load rating. I have a 14,000 gvw flatbed that I haul a variety of junk on and this hitch is definitely up for the job. The next time I need a hitch I will definitely consider this one.
Charles B.
6/29/2020
Still works great after several thousand miles of hauling heavy junk!
by: Estella11/27/2023
I ordered the Curt trailer hitch receiver and also another kit that I thought we needed to install it. They called me and told me the kit I ordered was in the trailer hitch already. It saved me money for them to call and let me know. I really appreciated the info and that I didn't need it.
by: Cody 05/07/2024
Has not arrived yet but wants me to leave a review. The other item box 2 of 2 has arrived.
by: Philip12/22/2018
1992 Dodge Ram Pickup
Thank you etrailer! I received my hitch right away and the box was in good condition. I installed the hitch and it looks great. I bought this hitch for the increased tongue capacity over my old hitch.
Philip
12/23/2019
My hitch is still working great. The finish is holding up great also.
by: Andrew 11/28/2023
1999 Dodge Ram Pickup
Installed on 99 Ram 2500 4x4 long bed. Install took 4+ hrs. Had to torch off the old bolts. Had to drill new holes for 1 set of bolts. The safety chain loops are so thick that it is difficult to get my breakaway switch carabiner on.
All in all, super heavy duty, it fit with spare tire and 4” exhaust. Just properly block it up. I didn’t the first time, and it fell on my face.
by: Travis09/26/2023
1983 Ford F-100, F-150, F-250, F-350
Price is good, the shipping was fast and the quality is outstanding. The installation required some drilling but overall was not bad. I will refer anyone to this site.
Thanks
by: Richard03/25/2018
1993 Dodge Ram Pickup
I put this on our 1993 Dodge dually after I noticed what looked like stress fractures on the old hitch while I was having an exhaust leak repaired. The failure was probably caused by an overloaded dump trailer full of gravel. The price for this Class V hitch from etrailer couldn’t be beat so I bought it. I’ve since pulled serveral large loads with my 3400lb dump trailer, the heaviest being a load of gravel weighing 5.67 tons according to the bill. More than 1000lbs shy of the 16000lb limit and it pulled great, even at over 60 mph.This hitch is heavy and well made. I use a forged ball mount with square tube clamp attached to make the assembly rigid. You’ll be amazed at how much this will quiten all of your towing. I feel like I got a great deal from etrailer on this hitch and wouldn’t hesitate to buy it again if we get another truck.
by: Alex08/25/2023
1988 Ford Bronco
88 bronco. Hitch fit great. I needed to grind a few spots but nothing more that 1/2 inch.
by: Vic 10/03/2023
Perfect fit to my truck - EASY to install.
ETrailer included everything I needed to
Install the hitch
by: Dustin 02/01/2024
You guys rock. Already at the house and came with all the hardware. This is why you are my #1 go to! Please don’t change anything!!!
by: Frankie 1977 Ford F-150 Ranger01/16/2022
2013 Ford Ranger
The hitch is extremely heavy duty and I highly recommend this product. Etrailer has great customer service, I received the hitch a day before the expected arrival date. I installed this on my 1977 Ford F-150 Ranger with the help of my 13 yr old grandson. This receiver hitch fit my truck perfectly, no modifications were needed. We removed the spare tire, drilled the holes and mounted the hitch per the instructions. The entire process took a little over an hour. I use a Shocker Hitch with an airbag, and it fits this hitch perfectly. I highly recommend Etrailer.
by: Brendan Hurst07/05/2018
1997 Ford F-250 and F-350 Heavy Duty
Very happy with the product. Was able to install by myself in a little over an hour, fit like a glove and has performed flawlessly with the loads of firewood I've been hauling. Shipping was fast, and the overall experience with etrailer was absolutely fantastic. Etrailer was one of the only websites that had an accurate description of the frame width/depth dimensions that made ordering the right hitch a breeze. Would recommend Etrailer to anyone in the market for Heavy Duty/Standard Duty Receiver Hitches, and all other trailer needs. Thanks for the great product and will be hauling with this hitch for some time. Have a Blessed day
by: Casey06/29/2023
1997 Ford F-250 and F-350 Heavy Duty
Good quality receiver. Required a lot of alternations to make fit. I repeat did not come anywhere close to fitting following the install instructions for a 97 F-350.
Jenny N.
7/10/2023
I wanted to ask you what modifications that you needed to do to install the hitch.
by: Eli10/13/2019
1989 Ford F-150, F-250, F-350
I'm pleased with my purchase. I wanted the highest capacity for my 1988 F350 4WD Crew Cab, that I could find. This one at the time I selected it, had the second highest towing, distributed-towing, and tongue weight rating of all of them (that would fit my truck). There was a really nice Torklift that had double (stacked) 2x2 receivers with the best rating, but it was significantly more expensive, and the Curt I got matches my truck's max tow rating. I didn't set out to get the welded one-piece unit, but it just turned out that way. Having seen it in person, and installed it, if someone has a similar truck, I'd have no problem recommending. It's a heavy heavy unit, that will last the lifetime of the truck.
by: David02/18/2013
1996 Chevrolet Cobalt
One extremely tough hitch. I have a 1996 Ford F250, the body shop thought it wouldn't work. I got it home and with a lot of grunting and drilling (use a new cobalt bit), I was able to bolt it, one side at a time. When drilling, use some cutting oil that's used for black iron pipe (Oatey, found in plumbing will work).
To make sure your carriage bolt plate will seat flat, make sure to drill as close inward toward the center of your vehicle as you can, allowing yourself enough metal as is reasonable. Thanks etrailer for the expedited shipping and great phone help. I've attached some pics for those who want to see what it looks like installed.
25
456
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Can I Pull a 6900-lbs Trailer with my 2008 Chevy Silverado Extended Cab with Short BedI'll start off by saying that the weights that you're seeing are the maximum capacities and not their actual weights, so you've got some room to work with. The GVWR is going to be the total weight that the truck can support with passengers and cargo (it factors in 150-lbs for the driver of the vehicle already)- your curb weight is going to be less than that, which is why when you're adding everything up it appears to be over. The good news is that the curb weight of the truck looks to be...
view full answer... - 1987 F350 with 34 inch Frame Hitch RecommendationThe 34 inch frame like what you have is typically found on the cab and chassis models of trucks. The hitch confirmed to fit your 1987 Ford F350 with a 34 inch frame is the Curt hitch part # C14082.
view full answer... - Will Curt Class V XD Trailer Hitch Receiver Fit a 1992 Dodge RamThe Curt Class V XD # C15300 is a confirmed fit for your 1992 Dodge Ram. However, on some model years, installation does require holes to be drilled, and others it uses existing holes. See the graphic attached to show the spacing of the holes. From center to center of the bolt holes, 1 to 2 measures 5-1/8 inches and from 2 to 3 it's 4-1/16 inches. Depending on how you measured yours the first two holes sound like they could line up. The issue will be with the last and it sounds like...
view full answer...
- What Does TW and WD Mean?Correct! TW stands for tongue weight and WD stands for Weight Distribution. I have a class V hitch for your 1990 F150,F250 or F350. The Curt Class V # C15300 will fit your 1990 Ford. This hitch has a max gross trailer weight of 16,000 lbs and a max GTW when used with weight distribution of 17,000 lbs. It has a Maximum tongue weight of 2,400 lbs and the maximum TW when used with weight distribution is 2,400 lbs. I've included an installation video for you to watch that will help you with...
view full answer... - Recommended Trailer Hitch Receiver For 1990 Ford F-250 with Spare TireThe Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15300 will most likely interfere with your spare tire. That doesn't mean it cannot fit, but it will most likely require the mentioned aftermarket modification. Curt # 14001 most likely won't fit even with a modified spare holder. To ensure no modification is needed for your spare tire, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 41904. This is a very strong hitch with a...
view full answer... - Towing Capacity of 2014 Dodge Ram Crew Cab 1500Your 2014 Dodge Ram Crew Cab 1500 has a towing capacity that is separate from the capacity the vehicle has for weight that it carries either in the bed or in the cab. With your truck fully loaded with passengers you can still tow a trailer. I attached a chart that shows the towing capacities of your truck based on how it's equipped.
view full answer...
- Does Width of Curt Trailer Hitch C15300 Fit 1993 Ford Super Duty PickupThe Curt Trailer Hitch Receiver # C15300 is designed to fit the 37-1/4 inch frame width of a 1993 Ford F-250 or F-350 pickup with a standard bumper. I have added a link below to a video install on a similar model year F-250, as well as a link to the directions for you to check out of the Curt Trailer Hitch Receiver # C15300.
view full answer... - What Capacity Truck Should I PurchaseThe short and sweet answer is to choose a truck that has a towing capacity greater than that of the heaviest trailer you plan on towing. This being said, determining the ultimate towing capacity of a truck can be tricky, because there are many variables that can affect what the bottom-line towing capacity of a truck is. These variables include engine size, transmission, axle ratio, whether the truck is 2WD or 4WD, the cab configuration and even the bed length can have an effect as well....
view full answer... - What Does GVWR Mean for TrailerGVWR stands for "Gross Vehicle Weight Rating" and you are on the money - it means the total combined weight allowed of the trailer and cargo when fully loaded. Trailers will have two weights, dry weight and cargo capacity. These two weights added together will be the trailer's GVWR and when choosing a trailer hitch receiver or fifth wheel hitch, you want to be sure you get one with a capacity that exceeds the GVWR of your trailer and that your vehicle also has the necessary towing capacity. I...
view full answer... - Will Curt Hitch # C15300 Fit 1979 Ford F-150 Long Bed with Standard or Step BumperYes, the Curt Class V trailer hitch you referenced, part # C15300, is a confirmed fit for your 1979 Ford F-150 long bed with standard or step bumper and 37-1/2-inch wide frame. Installation will require some drilling and temporary removal of the spare tire. An install video is linked for you. For a wiring harness you can use Draw-Tite # 18252 which provide a 4-pole flat trailer connector for your trailer lights. A great option in a ball mount kit is item # EBMK2416 which includes a ball...
view full answer... - Recommended Trailer Hitch For 1998 Dodge Ram 1500For your 1998 Dodge Ram 1500, and since you said you are going to be towing an enclosed race trailer, I recommend a Class V trailer hitch. I recommend the Curt Trailer Hitch Receiver, part # C15300. This hitch is a bolt-on installation and includes all the hardware needed. It has a 2 inch receiver opening and has a towing capacity of 16,000 lbs. I recommend the etrailer.com Ball Mount Kit, part # EBMK2416. This includes a ball mount, 2 hitch balls, a pin and clip an a handy storage bag....
view full answer... - Will Curt 15300 Hitch Interfere with Installing Firestone F2071 Air Helper Springs on 1992 Ford F150As long as there's at least 7-1/2 inches of clearance between the innermost edge of the tire and the frame, the Firestone # F2071 Air Helper Spring kit you'd looked at would work perfectly with the Curt # C15300 hitch. I think you might have seen the notation in the fit guide stating that the # F2071 won't work with in-bed hitches. By in-bed hitch, we're referring to a 5th wheel or gooseneck hitch that's mounted to the truck bed using frame mounted brackets that sit under the bed and would...
view full answer... - Bolt Hole Location on Curt Class V Trailer Hitch Receiver # C15300 for 1993 Ford F-150I spoke with my contact at Curt to obtain the mounting bolt hole locations for the Trailer Hitch Receiver, # C15300 on a 1993 Ford F-150. I have attached a picture to illustrate these measurements. As for repositioning the spare tire, you may need to work with it a little or guide it back into place after installing the hitch. Just takes a little bit of muscle to maneuver the tire away from the hitch and you will be good to go.
view full answer...
- Class V Trailer Hitch that Fits 1995 Ford F-350 DuallyThe Curt Class V hitch part # C15300 is a confirmed fit for your 1995 Ford F-350 dually that has the larger frame like you mentioned. This fits dually models as well.
view full answer... - What Does GVWR Mean for a TruckThe gross vehicle weight rating (GVWR), or gross vehicle mass (GVM) is the maximum operating weight/mass of a vehicle as specified by the manufacturer including the vehicle's chassis, body, engine, engine fluids, fuel, accessories, driver, passengers and cargo but excluding that of any trailers. Maximum trailer weight rating is the heaviest trailer you can tow. So for your truck the heaviest trailer you can tow would be 8,400 lbs regardless of what hitch you use. So you would not be able...
view full answer... - Will Curt Hitch C15300 Fit 1988 Ford F-150 With Dual Gas TanksI contacted Curt and as long as the gas tank does not cover the frame at all on the 1988 Ford F-150 the Curt Trailer Hitch Receiver part # C15300 will fit the truck with the dual gas tanks. I have attached an installation video for your reference. If you need to replace the trailer wiring, I recommend part # 118316 for a 4-pole connector.
view full answer... - Hitch and Replacement 7-Way Trailer Wiring Kit for 2001 Dodge RamThe Curt hitch part # C15300 is a confirmed fit for your 2001 Dodge Ram and would be a great choice with plenty of towing capacity. Then for a replacement 7-way you would want the part # HM42190.
view full answer... - Towing Capacity of 2016 Ford F-150 with 5.0L EngineI took a look at the online towing chart for your 2016 Ford F-150 and it lists a maximum trailer weight of 10,000 pounds for your F-150 model that is equipped with the 5.0L engine, 3:55 axle ratio, and 145 inch wheelbase. I do recommend verifying this information in your copy of the owner's manual or by checking with a local Ford dealer. I am not sure what your truck is already equipped with in terms of towing components so I will recommend all the parts you would need in order to tow...
view full answer... - Towing Capacity for 2011 GMC Sierra 1500 Extended CabA pickup's towing capacity depends on several details of its configuration; these include engine, drivetrain, cab style and bed length. I referred to an online owner's manual for the 2011 Sierra 1500 and in its towing guide (owner's manual section 9-97) it indicates the 1500 Series 2WD Extended Cab Standard Box version can tow the following weights: 4.3L V6 with 3.23 axle ratio = 4400-lbs 4.8L V8 with 3.23 axle ratio = 4700-lbs 4.8L V8 with 3.73 axle ratio = 6700-lbs I sent you a separate...
view full answer... - Highest Capacity Hitch Availability for a 1992 Ford F-350The highest rated hitch we offer for your 1992 Ford F-350 that has been confirmed to fit your frame width would be the Curt Hitch # C15300. This bad boy has capacities of 2,400 lbs tongue weight and 16,000 lbs total trailer weight. However this is a 2 inch hitch. This hitch is specifically designed to fit the larger 37-1/4 inch frames like you have. There will be some drilling required for installation. Check out the install video I attached. Another heavy duty hitch you may want to consider...
view full answer... - Fit of Curt Class V C15300 Hitch on 1986 Ford F-350It sure will. As long as your truck isn't a cab/chassis mode and doesn't have roll pan bumper, the Curt Class V hitch # C15300 will work great. I've linked to an install video showing the hitch being installed on a newer F250, but the fit would be the same for your truck as what's shown in the video.
view full answer... - Class V Hitch With Drop For 34 Inch Frame Rails on Custom TruckWe definitely have some options that will work for you, though in regards to the specific hitches you asked about, the Curt Trailer Hitch Receiver # C15300 is 36 inches between the bolt holes, while the Curt Trailer Hitch Receiver # C15410 measures 34 inches between the bolt holes. So neither is going to fit 34 inch wide outside-to-outside frame rails, which makes sense as these are custom-fit hitches. What you can use instead is a universal weld-on hitch that doesn't require that specific...
view full answer... - High Capacity Trailer Hitch for a 1995 Ford F-150 XLT with Regular Step BumperThe 2 Curt hitches you referenced are not a fit for a 1995 Ford F-150. Hitch # C15845 is for Super/Heavy duty cab and chassis models, not regular pickups, and # C15810 is for F-250 and F-350 models. For your F-150 with the regular step bumper you can use Curt hitch # C15300 or # 14001. I have linked some videos showing how these hitches install.
view full answer... - Will Curt # C15300 Clear Flatbed on 1997 Ford F350I spoke with my Curt representative, who tells me that the front face of the receiver would sit 10-3/4 inches rearward of the rear-most mounting hole. If you find the rear most mounting hole in the underside of the frame member and measure 10-3/4 inches rearward, it'll give you a good idea of how far back the face of the receiver would sit. I've edited a photo for you that shows this dimension.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Video Edited:
Zack K
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Sue W
Video by:
Joshua S
Video by:
Jonathan Y
Test Fit:
Nicholas E
Test Fit:
Shane H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
1/20/2024
I am sorry that this hitch arrived in this condition. It is common for hitches to arrive slightly bent. They are made from mild steel, so that the mounting brackets may flex while in use. This could also cause the brackets to flex during shipping. I have a link below with detailed instructions on how to bend the brackets back in place.
Helpful Links
faq-my-trailer-hitch-doesnt-fit.aspx