Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
(140 reviews)
Price: $178.94
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # C12107
Our Price: $178.94
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (140)
- Q & A (0)
- Photos
CURT Trailer Hitch - C12107
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- CURT
- 350 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
12107 Curt Class 2 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2013 - 2018 Toyota Avalon
- 2012 - 2017 Toyota Camry
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - C12107
Average Customer Rating: 4.7 out of 5 stars (140 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Joe 01/11/2024
I have bought several receiver hitches from etrailer and they were top quality hitches. Etrailer hitches are priced below the standard market prices for comparable hitches. I did have a problem installing the hitch in that the slots in the hitch were almost too short to get the bolts started. I do not know if it was the fault of the hitch or the car. It did install and looks nice on my car. I would and will buy from them again. Joe
by: John 10/18/2022
It is a near perfect fit. Bolts up and lines up as described and is very secure. Removing, cutting and reinstalling the plastic cover to get to the frame was a bit of a surprise and challenge. As was dropping the exhaust, but it all worked out. We use it for hauling bikes and it works great.
by: Jim11/18/2017
2017 Toyota Camry
I invested four hours total putting the hitch on the car. One hour was prep and cleanup. Could do another in less than two hours easy. I decided to ramp up the rear of the car with boards rather than jack and jack stands since they are always in the way when you're working underneath. (See pic.) I had the wife help me twice when putting the hitch on, the rest was just me. With the right tools near anyone can do it. (I'm 74). Your video and instructions are excellent and so is your product.
Have to mention something that will put a smile on your face. The first thing to be done was to remove the two brackets on either side of the car. They are held in place with two 14mm bolts on either side but they are kind of tough to get at so I decided to remove the 17mm nuts instead since they were easier to get at. A 17mm wrench with a mallet wasn't enough to get the nuts off so I got a 1/2" breaker bar and with all the strength I could muster I finally got those stubborn SOB's to break loose. Only then did I think to take a closer look and sure enough they were welded on (as per your instructions). Luckily they were meant to stay off.
Jim D.
by: Phillip12/08/2020
2012 Toyota Camry
I didn't cut off any underbody panel pieces. I just made a slit for the hitch to slide through. Also didn't cut off any heat shield. I drilled a hole for the 1/2" screw and torqued it to xx ftlb as instructed. Every thing worked fine. Hard to believe the video instructed to cut off that much. A bit crazy IMO. Also.. super snug fit. So snug I had trouble getting the M12 bolts to line up with the thread in the subframe. Pain the ass, but eventually got it in.
by: Dawn 06/13/2023
Ordering from etrailer is so easy and the prices are competitive. I have made at least 3 hitch & accessory purchases and I've never had the first problem. Some companies ask many irrelevant questions which makes selecting the proper hitch harder than it needs to be.
by: Andy05/17/2022
2014 Toyota Camry
The build quality is excellent and well built. The tolerances are very tight, I had to wallow out one of the mounting holes slightly. It fits a 2014 Hybrid nicely. The hardest part was dealing with the muffler being in the way. I am glad I had a single exhaust design. Also, my vehicle did not have access to the frame to feed the bolt though. I had to use a dremel to open a larger area for the rear mounts. Took a couple hours and had a helper hold the muffler aside while trying to drill required holes. It wasn't the easiest to install so I only gave 4 stars. But the product itself is well made and I feel it will work well.
by: Sally 09/01/2023
The customer service is excellent and my trailer hitch came in two days.
by: James p10/13/2018
2012 Toyota Camry
Fast delivery and everything fit perfect. Easy installation after watching etrailers videos. Lowest price I found on the internet for this hitch. Thanks for the great service.
by: Vin09/26/2020
2016 Toyota Camry
Fairly easy to install. Took 1hr and 45 minutes to install. Don't need the instructions just watch the video provided by etrailer. It easier to use a 1 and 1/8 hole saw then the step bit.
by: Canh07/21/2023
Excellent support on selection of proper parts and delivery tracking.
by: Shereen05/22/2023
2014 Toyota Avalon
The trailer store was unable to get this for us so I ordered directly. Got it in reasonable time and it was easy for my husband to install. We are up and going!! Thanks
by: Tim09/03/2019
2017 Toyota Camry
All equipment was delivered on time. Hitch, wiring harness, receiver and ball. Watched video's on installation of harness and hitch. Went down to my garage and installed both with the help of my girlfriend. Very satisfied with the products and the installation. etrailer supplied the goods and the knowledge. I am very happy that I went this route.
by: Jim DS05/26/2014
2013 Toyota Camry
The hitch was of industrial strength sadly unlike the enclosed instructions, which were weak at best. I have installed similar hitches on similar cars and getting this on a 2013 Camry V6 took 5 hours. Others have been a maximum of 2 hours. This includes the trip to Home Depot to get THE tool that you need that is not specified - a one inch metal hole saw that you WILL need in order to install this hitch. In summary, looks good, solid, needs better instructions. Do your own due diligence before you start on this and do NOT rely on the included instructions.
I should also mention that the plastic cover that the instructions say "give back to the customer" I did manage to get back on to the underside of the car with a bit of brute force and a couple fewer of the self tapping screws (bolts?) yet still is secure on the car after installation.
Jim D.
5/28/2015
The product works fine. The only issue is that the cut back exhaust heat shield rattles occasionally.
by: John 10/27/2022
Toyota Avalon
Good selection and good value on a trailer hitch for my Avalon from etrailer. Great to have for small boat trailers, lawn mower trailers, bike racks and small platforms for hauling coolers etc. Makes the car more versatile.
by: James04/12/2018
2017 Toyota Camry
Prompt delivery from etrailer. Quality well built trailer hitch. Provided instructions were pretty inadequate but watching the installation video on the website a couple times was all I needed to install this item. For my Camry it did involve some drilling as the video showed but was nothing super complicated. I am pretty mechanically inclined, and doing this installation all by myself took approx 4 or 4.5 hours from open box to cleanup. Very satisfied with this hitch and etrailer!
James
4/12/2019
Works fine, no problems with anything. Tucks up nice under the bumper so its not sticking out. No problems with it scraping the ground as others have said. Solid and built well. Thanks etrailer!!!
by: Father Paul07/04/2020
Good except that it was difficult to tell if the pin had to go further into the hitch for safety. Also it was very difficult to remove the bike rack from the hitch. I was told by Yakima Support that I should have put silicone spray inside the hitch before putting the bike rack in. God bless you!
Father Paul
7/5/2021
Good, but it is difficult to pull the hitch out, when removing it from my car. I have to use silicone spray to remove the hitch.
by: Neil S.12/27/2016
2013 Toyota Camry
Although the product it self is pretty well made, i am slightly disappointed in over all fitment of the trailer hitch. i am sure engineers have their reasons for the hitch hanging so low from the bumper.
install is fairly straight forward other then the need to widen the holes a little bit.
over its a good hitch i knew what i was buying i knew it would hang low.
good product nevertheless.
etrailer always makes it easy to buy.
Neil S.
12/27/2017
After a full year of ownership I am still happy with my hitch although it is starting to chip and rust is coming through around the receiver hole.still cant get used to seeing how low it hangs and have scraped it a couple of times coming out of driveways.other then that its a great addition to a car, converts a camry into a pickup truck with a little 4x6 trailer.
by: Nelson 03/14/2023
Easy installation due to exact model as in video
by: Robert 06/20/2020
2013 Toyota Camry
I installed this on a 2013 Camry SE. It fit perfectly and it went on exactly like the instructions said. I'm above average when it comes to handyness and it took me an hour including clean up. I did it in my garage with the car up on jack stands. If you are looking for a hitch is recommended this one.
Robert
6/22/2021
Its been a year since Ive installed this hitch. It still looks like new. I live in Wisconsin so its exposed to a lot of road salt in the winters and there is no rust.
by: Don10/29/2016
2015 Toyota Camry
I haven't even opened the box - this review is based solely on my past experience with the etrailer. Take it or leave it.
The review: I have never had the wrong parts shipped or the slightest problem with the etrailer on all my past orders. This is a Christmas present for someone else and I'm sure it will be perfect. Even if this wasn't "perfect," I have absolutely no doubt they (etrailer) would fix whatever might come up
Don
10/29/2017
Daughter-in-law has it installed on her Toyota and is working fine I’ve subsequently ordered a couple of more. The latest was on our 2016 Lexus RX 350 and it too “fit like a proverbial glove”-trailer light interface wiring also snapped in with no issues
by: Kevin05/27/2021
Ordered this so my Camry could tow my 2 stand up jet skies. Works great. Definitly more tricky to install than the one I did on my Honda Accord. However very much worth it.
Kevin
8/14/2022
Still working great in my Camry. I use it to tow the jet skies and it’s never had an issue.
by: Mike V04/20/2015
2012 Toyota Camry
This is the third hitch I have purchased from e trailer and as always it is an excellent fit and hitch. The hitch is on a Camry and looks and works great. Mike
Mike V.
4/21/2016
It is a great product. It is the second one I have purchased and it was as easy to install as the first one. If I change cars again I will buy from e-trailer.
by: Erick04/18/2016
2012 Toyota Camry
We purchased this hitch for our 2012 Toyota Camry LE. Toyota does not recommend towing with this vehicle, nor sell a Toyota hitch for this car. I don't know why, the Europeans will tow a huge camper behind any 4 cylinder gas miser. However we use the hitch to mount our bicycle rack, and it has worked out great for this purpose. We had it professionally installed by our auto-body mechanic, because frankly I'm at the stage of life where I can afford to pay someone who has a lift, instead of me contorting my body like a pretzel to climb under there and proceed to scrape my knuckles, lay down tools out of reach and otherwise frustrate myself into yelling profanity within earshot of the neighbors little kids. However feedback from the mechanic states that in went in like apiece of cake except that he had to cut a bit of the heat shield to make it fit. So if you are coming back from a trip to the moon, remember, you have a little less heat shield for re-entry.
by: Mark07/15/2022
I really expected the hitch to come with the hitch pin.
Also the directions could use a bit more detail especially where you have to make cut outs in the plastic the photos are really small for older eyes.
Katrina B.
7/19/2022
I apologize if it wasnt clear that this hitch does not come with a pin and clip. We do have hitch pins available that will fit your 1-14 inch hitch part # F-4 which is a basic pin and clip. We also have part # 5200 that is a locking pin
25
140
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- How Can I Carry a Motorcycle on my 2012 Toyota CamryI have a solution for you, but unfortunately there are no motorcycle carriers that will work in a 1-1/4" hitch receiver. Additionally, trying to use a hitch adapter reduces the tongue weight capacity of the hitch by 50%, so even that isn't going to be an option since it would reduce it down to around 175-lbs. Your best bet to carry a motorcycle is going to be to use a small utility trailer like the Detail K2 # K2MMT4X6. To put together a complete towing package you'll also need trailer...
view full answer... - Hitch Receiver and Hitch Bike Carrier Recommendations for 2013 Toyota Camry LEConsumers are protected by a Federal law called the Magnusson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the problem in question. A trailer hitch is a very common addition to many vehicles and dealerships often have their own OEM models available to sell you. These typically cost more than the aftermarket...
view full answer... - Hitch Recommendation for a 2014 Toyota Camry Hybrid for Carrying Bike RackI have a solution for you, but since the Curt Hitch part # C12107 requires the use of a stabilizer strap like part # 18050 when used with a non-supported accessory like a bike rack I would instead recommend you go with the Draw Tite Hitch part # 36540 as it doesn't have the requirement.This way you won't have anything contacting any painted surfaces of your vehicle while carrying your bikes. The tech tips for this hitch install on your vehicle state that drilling is required for installation,...
view full answer... - Largest Trailer Hitch Available for 2014 Toyota Camry HybridThe largest trailer hitch that fits a 2014 Toyota Camry Hybrid (or even non-hybrid) is a Class II hitch with a 1-1/4 inch receiver, made by Draw-Tite or Curt: - Draw-Tite Trailer Hitch Receiver # 36540 - Curt Trailer Hitch Receiver # C12107 These are the biggest hitches anywhere for this vehicle as something with a 2 inch hitch and larger capacity just isn't feasible for a sedan. The amount of torque and pressure put on its frame would be too great for the larger capabilities of a 2...
view full answer... - 2012 Toyota Camry Hybrid Trailer Hitch RecommendationFor a trailer hitch confirmed to fit your 2012 Toyota Camry Hybrid you would want the Curt hitch part # C12107 that has been confirmed as a fit for the vehicle. This hitch has a 350 lb tongue weight capacity and a 3,500 lb total trailer weight capacity. You would need to also check with Toyota to see what they recommend as towing capacities and be sure not to exceed the lower rating between the two. For a ball use # 19256 for a 1-7/8 inch diameter or # 19258 for a 2 inch diameter. For...
view full answer... - Recommended Trailer Hitch to use Thule Bike Rack on 2017 Toyota CamryThe hitches available for your 2017 Toyota Camry, the Curt # C12107 and Draw-Tite # 36540 are extremely similar and it would be difficult to say that one would be "better" than the other for your Thule Roadway # TH912XTR. The most noticeable difference is that the Curt hitch will require you to use stabilizing straps # 18050 when using your bike rack in order to maintain the warranty. The Draw-Tite # 36540 does not have the same requirement so I recommend going with that option over the...
view full answer...
- Recommendation for a Hitch and 4 bike Rack for a 2015 Toyota CamryBoth the Draw-Tite Class II Hitch, # 36540 and the Curt Class II Hitch, # C12107, will work well and do the job for you on your 2015 Toyota Camry. Both have the same towing capacities and very similar installation procedures. Both state that you will need to trim or modify the Camry's heat shield after the hitch has been installed. Between the two, I recommend the Draw-Tite hitch over the Curt hitch for two reasons. First, for basically the same design and material quality, the Draw-Tite...
view full answer... - Recommended Hitch and E-Bike Bike Rack for a 2014 Toyota Camry The only hitches available for the 2014 Toyota Camry are class II with a 1-1/4" receiver. The best option is the Curt Trailer Hitch item # C12107. This hitch is custom fit and bolts to your Camry with included hardware. It has a 200 lbs tongue weight capacity so plenty of ability to carry heavy e-bikes. You will want to verify what your Camry's actual capacity is though so you don't exceed it. I have linked an installation video below. For a compatible E-bike bike rack, I recommend...
view full answer... - Trailer Hitch for Carrying Bikes on 2016 Toyota CamryThe Curt # C12107 Class II hitch would be absolutely perfect for carrying a bike rack with your 2016 Toyota Camry. The hitch includes all the necessary hardware to successfully complete the installation. If you click the provided link, you can see a video of the hitch being installed on a 2016 Toyota Camry like yours. The Thule # TH9058 Camber would be an excellent choice for a bike rack. The no-frills rack is very rugged, is of high quality and is highly regarded by our customers. I've...
view full answer... - Troubleshooting Stripped Weld Nuts on Trailer Hitch InstallationThe Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12107 is a confirmed fit for your 2017 Toyota Camry. It sounds like the holes may have been misdrilled at the manufacturer, but it is a higher probability that there could have been a slight bend in the mounts during shipping as this does occur from time to time. Since you have stripped out the screw and the weldnuts, the best thing to do at this point is get a screw tap and matching grade 5 bolt from a local hardware...
view full answer... - Hitch Recommendation for 2017 Toyota Camry That Requires Least Amount of Vehicle ModificationThe install procedure for the Curt # C12107 and the Draw-Tite # 36540 are almost exactly alike, with a similar level of vehicle modification needed, which is pretty minor in both cases. Where they differ is the Draw-Tite hitch specifies that a hole be drilled in the heat shield for the forward-most hole on the passenger side while the Curt specifies that a large portion of the heat shield be trimmed away rather than drilling a bolt hole through it. In either case, the heat shield is reinstalled...
view full answer... - Recommended Trailer Hitch Receiver and Other Parts to Tow a Trailer with a 2017 Toyota Camry HybridYes, both the Draw-Tite # 36540 and Curt # C12107 trailer hitch receivers will fit your 2017 Toyota Camry Hybrid. Between the two I recommend the Draw-Tite because the Curt requires you use a support strap, # 18050, when using the hitch for any non-trailer loads like a bike rack or cargo carrier. Even though you're getting the hitch to tow a trailer you never know what you might use it for down the road. The wiring harness I recommend the # 118405. It installs by plugging in to the...
view full answer... - Trailer Hitch and Wiring Recommendation for 2016 Toyota Camry HybridFor your 2016 Toyota Camry the Curt hitch part # C12107 is a confirmed fit since it also fits the hybrid models. For trailer wiring then the Curt kit part # C55567 would work great and is easy to install. The ball mount you'd need is the part # C45017 and then for a ball # 19256 would be correct for a 1-7/8 inch size.
view full answer... - Curt Wiring Harness for 2016 Toyota Camry HybridAccording to Curt the wiring harness # C55567 does fit your hybrid model of the 2016 Toyota Camry. I've linked a video of the install on a 2012 Camry which is a similar process. The install details are also linked. If you need a trailer hitch as well part # C12107 is the correct fit for your Camry and the recommended ball mount is part # C45017. The ball mount fits hitch balls with a 3/4 inch shank so part # A-82 is the correct 2 inch ball and part # is the correct 1-7/8 inch. You...
view full answer... - Will the Hollywood Racks Over-the-Top Support Trek Hybrid BikesThe Hollywood Racks Over-the-Top Bike Rack, part # HRF2-3, might require your Trek Hybrids to use an adapter to mount the bikes on the bars (depending on the model, of course). I recommend the Hollywood Racks Bike Frame Adapter Bar for Women's and Alternative Frame Bikes, part # HRBA-PRO. It will create a top bar to hang your bikes. I've linked to a video review of it below. Keep in mind that the Over-the-Top has a weight capacity of 35 pounds per bike. Be sure to check that your model...
view full answer... - Recommended Trailer Hitch Receiver and Bike Rack For Carrying a Single Bike With 2015 Toyota AvalonI recommend the Draw-Tite Trailer Hitch Receiver # 36540 for your 2015 Toyota Avalon. This class II receiver is rated for up 300lbs of tongue weight and will not require Stabilizing Straps # 18050 like the Curt Trailer Hitch Receiver # C12107. The T-One Vehicle Wiring Harness # 118578 will give you a 4-way flat connector. This will allow you to use Auxiliary Lights # C53201 with your bike rack when you have your bike since the view of your tail lights may be impaired to other drivers....
view full answer... - Best Way to Haul Bikes on a 2017 Toyota CamryI have a solution for you, however there is not a 2" hitch available for a 2017 Toyota Camry. The stability of a 2" hitch is nice, but many 1-1/4" hitches can be made more stable with a few simple accessories and picking the right rack. Personally, I like the Curt Trailer Hitch, part # C12107, because of its particular rounded style. It's worthwhile to note that in order to maintain your warranty, you'll need to use stabilizing straps, like Curt's Support Straps, part # 18050 on any...
view full answer... - How to Transport a Heavy Kayak with a 2012 Toyota CamryI have a solution for you. First, though, a roof rack coupled with a kayak carrier is not a viable option. It looks like a fully-assembled Old Town Sportsman Bigwater PDL 132 weighs 117 pounds, which is more weight than even our best kayak carrier can handle. Instead, I suggest going with a watersport trailer. I recommend the Malone EcoLight Sport Trailer for a Heavy Kayak, part # MAL73FR. It can handle up to 400 pounds and is much safer way of transporting and loading your heavy kayak....
view full answer... - Recommended Bike Rack for the Curt Class II Trailer Hitch on a 2015 Toyota AvalonThe bike rack that I recommend using with the Curt Trailer Hitch # C12107 and Stabilizer Strap # 18050 on your 2015 Toyota Avalon is the Thule Camber # TH9058 for a few key reasons. The first reason is that hanging racks are lighter than platform racks (this one only weighs about 28 lbs) so moving it around and installing/removing it from your trailer hitch will be easier than some of the heavier bike racks. The second reason is that the cradles are set in place on the arms and are spaced...
view full answer... - Towing Small Heavy Trailer with a Nissan Leaf and Class I HitchA weight distribution system is recommended anytime you tow a trailer that weighs more than 50 percent of the tow vehicle, but it will not allow you to take on more weight than the maximum capacity. They are also incompatible with 1-1/4 inch hitches. Curt Trailer Hitch Receiver # C11396 is the only hitch we sell for your vehicle and is rated at 1500 pounds gross trailer weight and 150 pounds tongue weight. The combined weight of the trailer and contents cannot exceed 1500 pounds. You will...
view full answer... - Why Does Curt Trailer Hitch for 2017 Toyota Camry Require Stabilizing StrapBoth the Draw-Tite Class II # 36540 and Curt Class II # C12107 Trailer Hitches confirmed to fit your 2017 Toyota Camry are extremely well-built units. Curt requires that a stabilization strap like # 18050 be used with non-trailer loads (bike racks, cargo carriers) with their lower Class hitches simply as an added safety measure. This is not an indication of its strength or durability. When there is an option, I do usually recommend the Draw-Tite alternative because they do not have this...
view full answer... - Trailer Hitch and Wiring Harness for a 2012 Toyota Camry HybridFor a 2012 Toyota Camry Hybrid you can use Curt trailer hitch # C12107. I have included a link to the instructions for you. This hitch comes with the proper ball mount, pin and clip. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # C55567 that you have referenced. I have linked instructions for it as well.
view full answer... - Will The Draw-Tite or Curt Trailer Hitch Receivers Fit a 2014 Toyota Avalon Hybrid? Both the Draw-Tite # 36540 and Curt # C12107 trailer hitch receivers will fit your 2014 Toyota Avalon hybrid. I recommend going with the Curt # C12107 as I have noticed their finishes tend to be more durable. It is also made here in the USA. Curt recommends either the 2" Ball # C45572 or 1-7/8" Ball # C45571 if you plan on towing. The Master Lock Set # 3794DAT will allow you to secure your trailer to your Avalon while towing. I do recommend installing the T-One Vehicle Wiring Harness...
view full answer... - Recommended Trailer Hitch For 2016 Toyota CamryWhen installing a trailer hitch on your 2016 Camry, you will need to drill a couple holes in the frame as you mention. We do have a video of a hitch being installed on a Camry. It is a different year but the installation is the same. All of the hitches we offer for your Camry have a similar installation. The trailer hitch I recommend is the Draw-Tite Trailer Hitch Receiver, part # 36540. This is a Class ll hitch and it has a 1-1/4 inch receiver opening. I recommend this hitch over the...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Lori W
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Andrew L
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
10/19/2023
Couldt be happier with the product.