Will The Draw-Tite or Curt Trailer Hitch Receivers Fit a 2014 Toyota Avalon Hybrid?
Question:
2014 toyota avalon HYBRID....2.0 liter....what hitch AND wiring would work? I see the CURT and DrawTite for the gas engine no mention of the hybrid
asked by: Dave V
Expert Reply:
Both the Draw-Tite # 36540 and Curt # C12107 trailer hitch receivers will fit your 2014 Toyota Avalon hybrid. I recommend going with the Curt # C12107 as I have noticed their finishes tend to be more durable. It is also made here in the USA. Curt recommends either the 2" Ball # C45572 or 1-7/8" Ball # C45571 if you plan on towing. The Master Lock Set # 3794DAT will allow you to secure your trailer to your Avalon while towing.
I do recommend installing the T-One Vehicle Wiring Harness # 118578 when you install the receiver. This will give you a 4-way flat wiring connector. This will allow you to connect to most small trailers. It will also allow for Auxiliary Lights # C53201 if using a hitch mounted accessory such as a bike rack which impairs the view of your tail lights when loaded.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set - 1-1/4" and 2" Hitches
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Bent Pin
- 2 Inch Span
- Master Lock
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 4-5/8" Rise - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Auxiliary LED Indicator Lights
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Lights
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Trailer Wiring Harness Recommendation for a 1999 Isuzu NPR
- Q&A: Brake Controller Installation on 2016 Mercedes-Benz Sprinter
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Battery Life and Charging Time For The Linxup GPS AT3 Tracking Device
- Q&A: Trailer GPS Device for Trailer Installation
- Q&A: How Much is Monthly Service for Linxup GPS Tracking Device
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Installation of Slipper Spring with Open Eye End
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Connector for a Pollak PA66-MD40
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Best Bike Racks for Electric Bikes