THIS ITEM IS NOT A FIT FOR
2019 Ford F-250 Super Duty
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11177
Retail:$338.95
Our Price: $209.17
You Save: $129.78
2019 Ford F-250 Super Duty
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (24)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11177
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- No Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11177 Curt Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 1994 - 1998 BMW 3 Series
- 1999 - 1999 BMW 3 Series Convertible
- 1999 - 1999 BMW 3 Series Coupe
- 1992 - 1993 BMW 3 Series Coupe and Sedan
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11177
Average Customer Rating: 4.9 out of 5 stars (24 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Keith Hoffman05/08/2012
Pontiac Trans Sport Van
Thank you for your interest in my BMW Hitch installation. The hardest part was determining how to remove the plastic lower fascia on the car. As for the hitch itself, assembly was quite easy. In fact, if the hitch came with two way tape, the alignment and assembly would have been spot on. I recently purchased the trailer to transport my two bikes or lawn tractors.
The hitch receiver does rattle due to excessive clearance when towing the trailer empty, but does quiet down when weight is added to the trailer. My BMW is a 328 and has good power.
by: Richard F.07/10/2013
This kit came complete and it was a breeze to install. After watching the video online, I had mine installed in less than an hour. I could have done faster if the neighbor didn't come over to talk to me.
One suggestion is to add extension bar to the bottom bracket to reinforce it more, but only if you need more tongue strength. Great product.
by: James04/12/2021
1998 BMW 3 Series
It was fantastic, I was very happy when I found the DIY video that shows how easy it is to install myself. Thank you. I needed the hitch to pull a light trailer and small aluminum boat.
by: Roger 07/26/2023
Very high quality steel and welding and hardware. Installed very easily just exactly as it was supposed to it fit like a glove. I’m extremely happy with it, and the price was fair.
by: Joseph06/14/2019
Easy to install. Kinda skeptical about it mounting to the spare tire well but time will tell.
by: Nathan W08/12/2013
1998 BMW M3
I purchased this hitch and had my mechanic install it on my E36 M3 (it's 1998 4-door.)
As noted in the instructions that come with the hitch, the mechanic did have to cut a little plastic out of the rear panel that's under the bumper in order to install it. The area that needed cuttring is underneath the car and not visible once the hitch is installed.
The hitch does not pose any ground clearance issues (which was my main concern as my M3 is already very low.) The hitch doesn't hang any lower than the stock muffler already does.
The hitch arrived in good condition with all necessary parts needed for installation. Just as a heads up, this kit doesn't come with a wiring kit for brake lights; in my case, this was perfectly fine since I'm using the hitch for a bike rack and don't intend to tow a trailer with brake lights.
The hitch arrived quickly; it was delivered much earlier than expected.
Overall, it's a great hitch. It looks good, is small, unobtrusive, and gets the job done. A+
by: Lazaro07/25/2013
1997 BMW 3 Series
Here are some pics
by: Chris 06/13/2020
1999 BMW 3 Series
I'm impressed with the quality of the hitch and I will be installing it asap. But I wished you included the fasteners that I needed.
by: Rob 07/29/2023
Powder coat finish is perfect.
by: Ken Price05/06/2013
1997 BMW 3 Series
We purchased the hitch for our 1997 BMW 3 series to transport our bicycles on a bike rack.. The hitch arrived complete with all parts and also all bolts and nuts needed. It installed without problems. The hitch clears the bumper and trim on the car.
I did need to remove a piece of trim on the bumper (easy) during installation and put it back when done.
I took a bunch of pictures and will send a second email with them attached.
Ken
by: Randy L04/02/2014
Yes it came today...I am very excited about it...
Thanks for the link and easy to follow video on how to install it...
Randy L.
4/2/2015
Well I am happy to say that my trailer hitch has worked perfectly. It has allowed me to take my bike to the beach boardwalk after work on the back of my BMW 323ic convertible. It has really been a blessing to me and I want to thank the amazingly talented experts at etrailer for the amazing design and easy installation.
by: Ed Andrade04/19/2020
Very satisfied with the hitch and bicycle carrier
It was the only choice in the market for my Bimmer
by: Justin 03/04/2023
Great Hitch
by: Syed12/07/2021
Excellent product and perhaps the only one for older BMWs! It worked well to haul my load during my cross-country move.
by: Paul08/19/2016
1998 BMW 3 Series
Excellent fit and finish. Functional and looks great also!!
by: kirk c01/31/2017
Two days and it was here,great follow up
by: Chuck S09/28/2011
Good instructions and fit without any problems. Keep up the good work.
by: Scott 12/12/2023
by: William 03/07/2024
by: Kaye09/27/2023
by: StevyG09/08/2011
Perfect, Just Perfect!
by: John04/21/2023
by: Gerby02/08/2023
by: Don S04/26/2012
Very easy to install nice product.
24
24
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch that Fits 1999 BMW 328 ConvertibleThe Curt hitch # C11177 is a confirmed fit for your 1999 328 convertible and would do a great job to carry a bike rack like our very popular Hollywood Racks Trail Rider # HR200Z.
view full answer... - Trailer Hitch Fit for 1997 BMW 328i ConvertibleCurt confirms that their Class I # C11177 hitch is a fit for all models of the 1997 BMW 328i, including the convertible. If you don't already have a bike rack in mind, the Thule Hitching Post Pro - Folding Tilting 4 Bike Rack w Anti-Sway - 1-1/4" and 2" Hitches Item # TH934XTR would be a great choice. Even though it is a 4 -bike carrier, it would only allow you to transport 2 bikes weighing up to 35 lbs apiece since you have a Class I hitch. I've linked to an install video for the hitch...
view full answer... - Trailer Wiring Recommendation for a 1997 BMW 3 Series (E36)I recommend installing the Curt Powered Tail Light Converter # C59236 with the Curt Class I Hitch Receiver # C11177 on your 1997 BMW 3 Series (E36) as it has the newer module that's better protection for the vehicle and the trailer. In addition to all of this you'll need a ball mount setup with the appropriate rise/drop to tow a trailer. I'm linking a helpful article on ball mounts for you to check out and make sure you get the right one for your application.
view full answer... - Class I Trailer Hitch and Towing Accessories for 1999 BMW 323i ConvertibleAccording to my contacts at Curt Manufacturing, the Class I receiver you referenced, part # 11177 is a fit for your 1999 BMW 323i Convertible. The install procedure and capacities are outlined in the install instructions, which you can see by clicking on the provided link. The install and capacities are the same as the M3 2-door coupe. You can see an install video by clicking the provided link. You might also be interested in the following accessories: • Wiring Harness with 4-pole Flat...
view full answer... - Will Curt Hitch Fit 1997 BMW 318tiYes, the Curt # C11177 is the correct hitch for your 1997 BMW 318 ti. This fits all models of the 1997 3 series. It has a bolt-on installation and drilling will be required. No other modifications are necessary. I attached an installation video below for your reference.
view full answer... - Will Thule TH65JV 2-Bike Platform Type Trunk-Mount Bike Carrier Fit 1997 BMW 328 ConvertibleThe Thule OutWay Platform-Style 2 Bike Carrier, part # TH65JV, will fit on your 328 convertible since it mounts to the bumper and trunk in the same way as hanging type carriers. However, the weight of this very sturdy carrier (about 28 lbs) plus that of the two loaded bikes (up to 33 lbs per bike) makes for a significant load on the rear bumper cover and trunk of your 328 convertible. I suggest instead a hanging-type trunk-mount carrier that weighs substantially less than the OutWay platform....
view full answer... - Trailer Hitch And Bike Carrier Recommendation For 1999 BMW 323is CoupeThe trailer hitch that is designed for your 1999 BMW 323is Coupe is the Curt Hitch, part # C11177. This is a Class l hitch and it has a 1-1/4 inch receiver opening. A technical note from Curt states that all non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps like part # 18050 Failure to properly support these loads will void your hitch warranty from Curt. I have attached a link to an installation video for this hitch you can check...
view full answer... - Trailer Hitch Recommendation that Fits 1994 BMW 325i ConvertibleWe have the Curt hitch part # C11177 that is a confirmed fit for your 1994 BMW 325i convertible and would have enough capacity for the trailer weights you mentioned as it has a capacity of 2,000 lbs. Only BMW will be able to tell you if your vehicle is rated for towing though. I wish we could give you an exact hitch height figure for this but we do not have that dimension. For a ball mount then you'd want the part # C45521 which has a rise of 3-1/4 inches, hitch ball # A-82 for a 2 inch...
view full answer... - Trailer Hitch and Wiring Harness Recommendation for 1999 BMW 3-SeriesCurt offers two different hitches for the 1999 BMW 3-series. For the Sedan, use # C11174. If you have the convertible or the coupe, you'd use # C11177. For a ball mount, use # C45521 and a # PC2 hitch pin. For a trailer ball, use # A-80 for a 1-7/8 inch or # A-82 for a 2 inch ball. You'll also need a trailer wiring harness like part # C59496. The 1-1/4 inch refers to the dimensions of the receiver tube that the ball mount inserts into. While the 1-7/8 inch dimension refers to the...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Expert Research:
Mike L
Expert Research:
Michael H
Video by:
Andrew K
Written by:
Lindsey S
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Chris
6/14/2021
Ive given the car to my son for his project car. So hes going to be able to have room for his bike and toys. Working well for launch of a small boat. So yah Im happy with it.